张全忠,张立文,刘伟伟.环形件惯性摩擦焊过程塑性区演化的数值模拟研究[J].塑性工程学报,2007,14(6):200-204. Zhang Quanzhong, Zhang Liwen, Liu Weiwei. Numerical investigation on evolution of plastic zone during inertia friction welding process of ring parts[J]. Journal of Plasticity Engineering, 2007,14(6):200-204. (in Chinese)
[2]
刘伟伟,张立文,张全忠.不同能量密度的环件惯性摩擦焊接过程数值模拟[J].焊接学报,2007,28(7):72-76. Liu Weiwei, Zhang Liwen, Zhang Quanzhong. Numerical simulation of effect of different energy density on inertia friction welding process[J]. Transactions of the China Welding Institution, 2007,28(7):72-76. (in Chinese)
[3]
Li Wenya, Ma Tiejun, Li Jinglong. Numerical simulation of linear friction welding of titanium alloy: effects of processing parameters[J]. Materials and Design, 2010,31:1497-1507.
[4]
Jeong H S, Cho J R, Oh J S, et al. Inertia friction welding process analysis and mechanical properties evaluation of large rotor shaft in marine turbo charger[J]. International Journal of Precision Engineering and Manufacturing, 2010,11(1):83-88.
[5]
傅莉,刘小文,鄢君辉,等.惯性摩擦焊接钢管焊合区热塑性变形参量场的数值分析[J]. 机械科学与技术, 2000,19(3):439-441. Fu Li, Liu Xiaowen, Yan Junhui, et al. Numerical analysis on the coupled thermo plastic deformation field during inertia friction welding of steel tube[J]. Mechanical Science and Technology, 2000,19(3):439-441. (in Chinese)
[6]
Huang Z W, Li H Y, Baxter G, et al. Electron microscopy characterization of the weld line zones of an inertia friction welded superalloy[J]. Journal of Material Processing Technology, 2011,211(12):1927-1936.
[7]
Moat R, Karadge M, Preuss M, et al. Phase transformations across high strength dissimilar steel inertia friction weld[J]. Journal of Materials Processing Technology, 2008,204 (1-3):48-58.
[8]
李付国,聂蕾,李庆华.GH4169合金惯性摩擦焊接过程组织计算与预测[J].焊接学报,2002,23(1):30-33. Li Fuguo, Nie Lei, Li Qinghua. Microstructure simulation and prediction of IN-718 superalloy in inertial friction welding[J]. Transactions of the China Welding Institution, 2002,23(1):30-33. (in Chinese)
[9]
Bennett C J, Hyde T H, Shipway P H. A transient finite element analysis of thermoelastic effect during inertia friction welding[J]. Computational Materials Science, 2011,50(9):2592-2598.
[10]
Bu Wende, Liu Jinhe. The coupled thermal mechanical modeling of the inertia friction welding process for inconel718[J]. Materials Science Forum, 2011(704-705):710-716.
[11]
李文亚,陈亮,余敏.GH4169合金惯性摩擦焊接头温度场显式有限元数值模拟[J].焊接学报,2011,32(6):61-64. Li Wenya, Chen Liang, Yu Min. Numerical simulation on temperature field of inertia friction welded GH4169 joint by explicit finite element analysis[J]. Transactions of the China Welding Institution, 2011,32(6):61-64. (in Chinese)
