胡正寰,张康生,王宝雨,等.楔横轧零件成形技术与模拟仿真[M].北京:冶金工业出版社,2004:9-25. Hu Zhenghuan, Zhang Kangsheng, Wang Baoyu, et al. The forming technology and simulation of parts with cross wedge rolling[M]. Beijing: Metallurgical Industry Press, 2004:9-25. (in Chinese)
[2]
张康生,刘晋平,王宝雨,等.楔横轧空心件稳定轧制条件分析[J].北京科技大学学报,2001,23(2):155-157. Zhang Kangsheng, Liu Jinping, Wang Baoyu, et al. Analysis on stable rolling condition of hollow workpiece rolled by cross wedge rolling[J]. Journal of University of Science and Technology Beijing, 2001,23(2):155-157. (in Chinese)
[3]
Neugebauer R, Kolbe M, Glass R. New warm forming processes to produce hollow shafts[J]. Journal of Materials Processing Technology, 2001,119:277-282.
[4]
Neugebauer R, Glass R, Kolbe M, et al. Optimisation of processing routes for cross rolling and spin extrusion[J]. Journal of Materials Processing Technology, 2002,125-126:856-862.
[5]
Bartnicki J, Pater Z. The aspects of stability in cross-wedge rolling processes of hollowed shafts[J]. Journal of Materials Processing Technology, 2004,155-156:1867-1873.
[6]
Bartnicki J, Pater Z. Numerical simulation of three-rolls cross-wedge rolling of hollowed shaft[J]. Journal of Materials Processing Technology, 2005,164-165:1154-1159.
[7]
Urankar S, Lovell M, Morrow C, et al. Establishment of failure conditions for the cross-wedge rolling of hollow shafts[J]. Journal of Materials Processing Technology, 2006,177:545-549.
[8]
Urankar S, Lovell M, Morrow C, et al. Development of a critical friction model for cross wedge rolling hollow shafts[J]. Journal of Materials Processing Technology, 2006,177:539-544.
[9]
徐春国,任广生,邱永明,等.内径管形件的楔横轧工艺[J].锻压技术, 2005(增刊):51-55. Xu Chunguo, Ren Guangsheng, Qiu Yongming, et al. Cross wedge rolling for forming hollow part with equal inner diameter[J]. Forging & Stamping Technology, 2005(Suppl):51-55. (in Chinese)
[10]
杜凤山,汪飞雪,杨勇,等.三辊楔横轧空心件成形机理的研究[J].中国机械工程,2005,16(24): 2242-2245. Du Fengshan, Wang Feixue, Yang Yong, et al. Study on compacting mechanism of hollow workpiece by 3-roll cross wedge rolling[J]. China Mechanical Engineering, 2005,16(24):2242-2245. (in Chinese)
[11]
丁韡,杨翠苹,张康生,等.楔横轧等内径空心轴的热力耦合数值模拟[J].北京科技大学学报,2010,32(4):525-529. Ding Wei, Yang Cuiping, Zhang Kangsheng, et al. Thermomechanical coupled numerical simulation on cross wedge rolling of hollow shaft parts with equal inner diameter[J]. Journal of University of Science and Technology Beijing, 2010,32(4):525-529. (in Chinese)
[12]
李连诗.钢管塑性变形原理[M].北京:冶金工业出版社,1985:220-227. Li Lianshi.Steel pipe plastic deformation principle[M]. Beijing: Metallurgical Industry Press, 1985:220-227. (in Chinese)
