OALib Journal期刊
石墨基体等离子喷涂TiC涂层耐烧蚀性能研究
Keywords: 等离子喷涂 ,TiC涂层 ,耐烧蚀 ,致密化
Abstract:
采用等离子喷涂方法在石墨基体上制备出较为致密的Mo黏结层和TiC耐烧蚀涂层,利用SEM,XRD表征氧乙炔烧蚀试验前后涂层的表面形貌与相结构.结果表明:随着烧蚀距离减小,涂层质量烧蚀率呈现先增加后减小的趋势,最终趋于稳定;随着烧蚀时间增大,致密化区域快速增大,涂层质量烧蚀率略有增加.烧蚀过程中涂层经历了点状熔融、线形连接、网状连接和完全致密4个过程.TiC涂层在高温燃流作用下氧化生成TiO2并熔融,在燃流冲刷和表面张力作用下发生黏性流动,形成TiO2致密层
References
[1] 马文;郭洪波;宫声凯.等离子喷涂铈酸镧热障涂层[J].无机材料学报,2009(05)doi:10.3724/SP.J.1077.2009.00983 [2] Padture NP ；Gell M ；Jordan EH,Materials science - Thermal barrier coatings for gas-turbine engine apptications [Review],Science？,2002, 296(5566). [3] 付前刚,李贺军,李克智.C/C复合材料防氧化涂层SiC/SiC-MoSi2的制备与抗氧化性能[J].金属学报,2009(04) [4] Paulmier, T ；Balat-Pichelin, M ；Le Queau, D,Structural modifications of carbon-carbon composites under high temperature and ion irradiation,Applied Surface Science？,2005, 243(1/4). [5] 张蕾;严川伟;屈庆.原子氧对金属Ag及其表面TiO2-有机硅热控涂层的侵蚀[J].金属学报,2003(09) [6] Li YL. ；Ishigaki T.,Thermodynamic analysis of nucleation of anatase and rutile from TiO2 melt,Journal of Crystal Growth？,2002, 242(3/4). [7] 张小农,李超,李小璀.原位自生成TiC/Ti基复合材料的高温氧化[J].稀有金属材料与工程,2004(03) [8] Bartulia C;Valentea T;Tuluib M,Plasma spray deposition and high temperature characterization of ZrB2-SiC protective coatings,Surface and Coatings Technology,2002. [9] K. L. Choy,Chemical vapor deposition of coatings,Progress in Materials Science？,2003, 48(2). [10] Smeacetto F;Ferraris M;Salvo M,Protective coatings for carbon bonded carbon fibre composites,Ceramics International？ ,2008, 34. [11] Baklanova N I;Zima T M;Boronin A I,Protective ceramic multilayer coatings for carbon fibers,Surface and Coatings Technology,2006(06). [12] Ewais E M,A review:carbon based refractories,Journal of the Ceramic Society of Japan,2004(10).
Full-Text
Contact Us
service@oalib.com
QQ:3279437679
WhatsApp +8615387084133
