Pinel S I, Signer H R, Zaretsky E V. Comparison between oil-mist and oil-jet lubrication of high-speed, small-bore, angular-contact ball bearings[J]. Tribology Transactions, 2001,44(3):327-338.
[2]
Glahn A, Wittig S. Two-phase air/oil flow in aero-engine bearing chambers: characterization of oil film flows[J]. Transactions of the ASME, Journal of Engineering for Gas and Turbines Power, 1996,118(7):578-583.
[3]
吴昊天,陈国定.航空发动机轴承腔润滑的气液两相均匀流研究[J].摩擦学学报,2007,27(1):78-82. Wu Haotian,Chen Guoding. Homogeneous flow of two-phase gas/liquid flow in aero-engine bearing chamber[J]. Tribology,2007,27(1):78-82. (in Chinese)
[4]
陈国定,刘曼利,刘亚军,等.不同流型下轴承腔中油气介质的流动特征参数[J].航空学报,2010,31(12):2400-2406. Chen Guoding,Liu Manli,Liu Yajun,et al. Characteristic flow parameters of oil/air lubricants in bearing chamber under different flow patterns[J]. Acta Aeronautica Et Astronautica Sinica,2010,31(12):2400-2406. (in Chinese)
[5]
徐让书,王娟娟,刘立博,等.航空发动机轴承腔内两相流动数值模拟[J].润滑与密封,2011,36(3):73-77. Xu Rangshu, Wang Juanjuan, Liu Libo, et al. Numerical simulation of two-phase air/oil flow in aero-engine bearing chamber[J]. Lubrication Engineering, 2011, 36(3):73-77. (in Chinese)
[6]
Coe H H, Zaretsky E V. Predicted and experimental performance of jet-lubricated 120-millimeter-bore ball bearings operating to 2.5 million DN NASA, TP-1196 . Washington D.C.: NASA, 1978.
[7]
Hadden G B, Kleckner R J, Ragen M A, et al. Steady state and transient thermal analysis of a shaft bearing system including ball, cylindrical, and tapered roller bearings NASA, CR-165365 . Washington D.C.: NASA, 1981.
[8]
Parker R J. Comparison of predicted and experimental thermal performance of angular contact ball bearings NASA, TP-2275 . Washington D.C.: NASA, 1984.
[9]
王福军.计算流体动力学分析[M].北京:清华大学出版社,2004. Wang Fujun. Computational fluid dynamics analysis[M]. Beijing: Tsinghua University Press, 2004. (in Chinese)
