赵则祥.公差配合与质量控制[S].郑州:河南大学出版社,1999:3-8.Zhao Zexiang. Tolerances and quality control[S]. Zhengzhou: Henan University Press, 1999:3-8. (in Chinese)
[2]
杨波,高常青.生长型设计中公差进化设计方法研究[J].机械工程学报,2012,48(7):147-155.Yang Bo,Gao Changqing. Tolerance evolutionary strategy in incremental growth design[J]. Journal of Mechanical Engineering,2012,48(7):147-155. (in Chinese)
[3]
彭和平.基于新一代GPS框架的公差设计理论与方法研究[D].武汉:华中科技大学,2009. Peng Heping. Study on theory and methodology of tolerance design within the framework of the new generation GPS standards system[D]. Wuhan: Huazhong University of Science and Technology,2009. (in Chinese)
[4]
杨将新.基于装配定位约束的功能公差规范设计[J].机械工程学报,2010.46(2):1-8.Yang Jiangxin. Functional tolerance specification design based on assembly positioning[J]. Journal of Mechanical Engineering, 2010,46(2):1-8. (in Chinese)
[5]
王太勇.蒙特卡洛仿真法在尺寸及公差设计中的应用[J].农业机械学报,2005,36(5):101-104. Wang Taiyong. Application of Monte Carlo method to dimension and tolerance design[J]. Transactions of The Chinese Society of Agricultural Machinery, 2005,36(5):101-104. (in Chinese)
[6]
王先逵.机械制造工程学基础[M].北京:国防工业出版社,2011:350-357.Wang Xiankui. Mechanical manufacturing engineering foundation[M]. Beijing: National Defence Industry Press, 2011:350-357. (in Chinese)
[7]
李纯甫.GB/T5847—1986尺寸链计算方法[S].北京:国家标准出版社,1986.Li Chunfu. GB/T5847—1986 Dimensional chain, methods of calculation[S]. Beijing: National Institute of Standards Press, 1986. (in Chinese)
