沈启平. 车用高功率密度永磁同步电机的研究[D].沈阳:沈阳工业大学, 2012. Shen Qiping. Study on high power density permanent magnetsynchronous motor for electric vehicles application[D]. Shenyang: Shenyang University of Technology, 2012.(in Chinese)
[2]
Ishak D, Zhu Z Q, Howe D. Eddy-current loss in the rotor magnets of permanent-magnet brucshlessmachines having a fractional number of slots per pole[J]. IEEE Trans Magn, 2005, 41(9):2462-2469.
[3]
Kawase Y, Ota T, Fukunaga H. 3-D Eddy current analysis in permanetmagnet of interriorpermanent motors[J]. IEEE Trans Magn 2000, 36(4):1863-1866.
[4]
徐向永, 胡建辉, 邹继斌.表贴式永磁同步电机电机转子涡流损耗解析计算[J].电机与控制学报, 2009, 13(1):63-66. Xu Xiangyong, Hu Jianghui, Zou Jibin. Analytical calculation of rotor eddy current losses ofsurface-mounted PMSM[J]. Electric Machines and Control, 2009, 13(1):63-66.(in Chinese)
[5]
Takahashi I, Koganezawa T, Su G J. A super higher speed PM motor drive system by a quasi-current source inverter[J]. IEEE Trans Ind Appl, 1994, 30(3):683-690.
[6]
Yamazaki K, Shina M, Kanou Y, et al. Effect of eddy current loss reduction by segment ofmagnets in synchronous motors: difference between interior and surface type[J]. IEEE Transactions on Magnetics, 2009, 45(10):4756-4759.
[7]
Zhu Z Q, Schofield N K, Howe D. Analytical prediction of rotor eddy current loss in Brushless machines equipped with surface-mounted permanent[C]//Proceedings of the 5th International Conference on Electrical Machines and Systems, ICEMS\'2001. Shenyang, China:[s.n.], 2001:806-809.
[8]
杨玉波, 王秀和, 朱常青.电枢槽口宽度对内置式永磁同步电机齿槽转矩的影响[J].电机与控制学报, 2011, 15(7):21-25. Yang Yubo, Wang Xiuhe, Zhu Changqing. Effect of slot opening on the cogging torque of permanent magnet synchronous motor[J]. Electric Machines and Control, 2011, 15(7):21-25.(in Chinese)
[9]
张洪亮.永磁同步电机铁心损耗与暂态温度场研究[D].哈尔滨:哈尔滨工业大学, 2010. Zhang Hongliang. Iron losses and transient temperature field of permanent magnetic synchronous motor[D]. Harbin: Harbin Institute of Technology, 2010.(in Chinese)
