徐滨士,刘世参,史佩京.再制造工程和表面工程对循环经济贡献分析[J]. 中国表面工程,2006,19(1):1-6. Xu Binshi,Liu Shican,Shi Peijing. Contribution of remanufacturing engineering and surface engineering to cycle economy[J]. China Surface Engineering, 2006,19(1):1-6. (in Chinese)
[2]
董丽虹,徐滨士,董世运,等.金属磁记忆技术用于再制造毛坯寿命评估初探[J].中国表面工程,2010,23(2):106-111. Dong Lihong, Xu Binshi, Dong Shiyun, et al. Progress in life prediction of remanufacturing blanks by using metal magnetic memory testing[J]. China Surface Engineering, 2010,23(2):106-111. (in Chinese)
[3]
周迅,俞小莉,李迎.弯曲疲劳载荷下曲轴剩余强度的简化试验模型[J].兵工学报,2006,27(4):712-715. Zhou Xun, Yu Xiaoli, Li Ying. Test model for investigating the residual strength degeneration regularity of crankshaft serving on bending fatigue load[J]. Acta Armamentarii, 2006,27(4):712-715. (in Chinese)
[4]
陈斌.非线性超声检测技术[D].北京:清华大学,2006. Chen Bin. Nonlinear ultrasonic test technology[D]. Beijing: Tsinghua University,2006. (in Chinese)
[5]
陈传尧.疲劳与断裂[M].武汉:华中科技大学出版社,2002:17-43. Chen Chuanyao. Fatigue and fracture[M]. Wuhan: Huazhong University of Science & Technology Press, 2002:17-43. (in Chinese)
[6]
刘贵民.无损检测技术[M].北京:国防工业出版社,2006:10-102. Liu Guimin. Nondestructive testing technology[M]. Beijing: National Defense Industry Press, 2006:10-102. (in Chinese)
[7]
任吉林.涡流检测技术近20年的进展[J].无损检测,1998,20(5):121-128. Ren Jilin. Development of eddy current testing in recent twenty years[J]. Nondestructive Testing, 1998,20(5):121-128. (in Chinese)
[8]
Libby H L. Introduction to electromagnetic nondestructive test methods[M]. New York: John Wiley & Sons Inc.,1971.
[9]
张东利,陈振茂,武美先,等.多频涡流裂纹重构方法及其在金属夹芯板焊部裂纹定量检测中的应用[J].无损检测,2010,32(8):556-559,604. Zhang Dongli, Chen Zhenmao, Wu Meixian, et al. A multi-frequency inversion algorithm and its applications in quantitative node of cracks in welding joints of a metallic lattice sandwich plate[J]. Nondestructive Testing, 2010,32(8):556-559,604. (in Chinese)
