贾美慧,唐承统.不锈钢管材弯曲成形回弹预测模型研究[J].北京理工大学学报,2012,32(9):910-914. Jia Meihui, Tang Chengtong. Springback prediction model on tube bending formation of stainless steel[J]. Transactions of Beijing Institute of Technology, 2012,32(9):910-914. (in Chinese)
[2]
董志涛.液压胀形汽车桥壳的实验研究与有限元仿真[D] .秦皇岛:燕山大学,2007. Dong Zhitao. Test research and finite element method simulation for hydro-bulging drivingaxle [D]. Qinhuangdao: Yanshan University, 2007. (in Chinese)
[3]
高鹏飞.汽车后桥壳液压胀形工艺的数值仿真[D].秦皇岛:燕山大学,2005. Gao Pengfei. Numerical simulation of hydroforming process for automobile rear axle housing[D] . Qinhuangdao: Yanshan University, 2005. (in Chinese)
[4]
Lang L H, Wang Z R. Hydroforming highlights: sheet hydroforming and tube hydroforming[J]. Journal of Materials Processing Technology, 2004,151:165-177.
[5]
王连东.回转壳体正负成形理论及汽车桥壳胀形工艺的研究[D].秦皇岛:燕山大学,2001. Wang Liandong. Study on positive-negative forming theory of revolving shell and bulging technology of automobile axle housings[D]. Qinhuangdao: Yanshan University, 2001. (in Chinese)
[6]
苑世剑,韩聪,刘刚,等.轿车副车架内高压成形[J].锻压技术,2004,29(3):41-44. Yuan Shijian, Han Cong, Liu Gang, et al. Hydroforming of an engine cradle[J]. Forging & Stamping Technology, 2004,29(3):41-44. (in Chinese)
[7]
苑世剑.内高压成形技术现状与发展趋势[J].金属成形工艺,2003,21(3):1-3. Yuan Shijian. Development and trends in internal high pressure forming[J]. Metal Forming Technology, 2003,21(3):1-3. (in Chinese)
[8]
苏岚,王先进,唐荻,等.T型管液压成形过程的有限元分析[J].北京科技大学学报,2002,24(5):537-540. Su Lan, Wang Xianjin, Tang Di, et al. Analysis of T-shaped tube hydroforming by finite element method[J]. Journal of University of Science and Technology Beijing, 2002,24(5):537-540. (in Chinese)
[9]
于强,杨连发,巢鹏飞.薄壁管液压胀形过程的数值模拟[J].模具工业,2005(11):3-6. Yu Qiang, Yang Lianfa, Chao Pengfei. Numerical simulation of hydraumatic bulging process of thin-walled tube[J]. Die & Mould Industry, 2005(11):3-6. (in Chinese)
[10]
郭成,杨连发.内补液增压式THF性能测试装置开发及试验研究[J].机械工程学报,2005,41(9):180-184. Guo Cheng, Yang Lianfa. Simple tooling with internal pressure source to evaluate the tube hydro-bulging formability[J]. Chinese Journal of Mechanical Engineering, 2005,41(9):180-184. (in Chinese)
