全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

高负荷跨声速压气机流场结构分析

DOI: 10.16411/j.cnki.issn1006-7736.2015.02.014, PP. 77-83

Keywords: 压气机,流场结构,非定常,激波,分离

Full-Text   Cite this paper   Add to My Lib

Abstract:

为研究某压气机内部流场结构,采用全流道非定常数值模拟方法,对跨声速压气机最高效率点和近失速点流场进行求解,重点分析近失速工况下压气机内部流场结构.研究表明:在近失速工况下,动叶槽道激波前推与前缘脱体激波融合为一道激波,强度增强;动叶20%叶高处激波前推最为严重,引起动叶吸力面附面层严重分离;静叶根部受上游动叶尾迹影响形成大范围的分离区,并有空间环涡结构形成.

References

[1]  Inoue M, Kuroumaru M, Yoshida S, et al. Effect of tip clearance on stall evolution process in a low-speed axial compressor stage[C]. ASME Paper, 2004, GT2004-53354
[2]  张燕峰,楚武利,卢新根. 跨声速轴流压气机近失速状态的间隙泄漏流流动特性[J]. 航空动力学报,2008,07:1293-1298.
[3]  Zhang Yanfeng, Chu Wuli, Lu Xingen. Numerical simulation of the flow characteristic of tip leakage flow in a transonic axial-flow compressor at near stall condition[J]. Journal of Aerospace Power, 2008,07:1293-1298.
[4]  吴艳辉,吴俊峰,稂仿玉,王晓. 轴流压气机转子近叶尖流动的试验和数值研究之二:近失速工况流动特征分析[J]. 工程热物理学报,2014,01:60-65.
[5]  Wu yanhui, Wu Junfeng, Lang Fangyu, et al. Experimental and Numerical Investigation of Near-Tip Flow-Field in an Axial Flow Compressor Rotor-Part II: Flow Characteristics at Near-Stall Operating Conditions[J]. Journal of Engineering Thermophysics, 2014,01:60-65.
[6]  李清鹏,吴艳辉,楚武利,张皓光. 轴流压气机转子近失速工况全通道数值模拟[J]. 航空动力学报,2011,10:2330-2338.
[7]  Li Qingpeng, Wu Yanhui, Chu Wuli, et al. Full-annulus simulations on axial compressor rotor at near stall condition[J]. Journal of Aerospace Power, 2011,10:2330-2338.
[8]  Adamczyk JJ, Celestina ML, Greitzer EM. The role of tip clearance in high-speed fan stall[J]. Journal of Turhomachinery, 1993, 115 (1): 28-38
[9]  周军伟,杨荣菲,侯安平,周盛. 压气机近失速点旋涡流场时空演化分析[J]. 力学学报,2010,04:623-628.
[10]  Zhou Junwei, Yang Rongfei, Hou Anping, et al. Time-Space Analysis of Vortex Flow Field in Compressor at Near-Stall Point[J]. Chinese Journal of Theoretical and Applied Mechanics, 2010,04:623-628.
[11]  Lu Huwei, Chen Fu, Wan Jilin. Flow Field Improvement by Bowed Stator Stages in a Compressor with Different Axial Gaps Under Near Stall Condition[J]. Chinese Journal of Aeronautics,2008,03:215-222.
[12]  于贤君,刘宝杰,张志博,赵斌. 近失速状态下压气机静子通道内的三维流动[J]. 工程热物理学报,2009,01:53-56.
[13]  Yu Xianjun, Liu Baojie, Zhang Zhibo, et al. Three-Dimensional Flow Structures in Stator Passage of an Axial Compressor at the Near-Stall Condition[J]. Journal of Engineering Thermophysics, 2009,01:53-56.
[14]  Wike I, Kau HP. A Numerical Investigation of the Flow Mechanisms in a HPC Front Stage with Axial Slots[C], ASME Paper,2003, GT-2003-38481
[15]  Khaleghi H, Teixeira JA, Tousi AM, et al. Parametric study of injection angle effects on stability of transonic axial compressors[J]. Journal of Propulsion and Power, 2008,24(5): 1100-1107
[16]  赵勤,吴云,李应红,赵小虎,张海灯. 端壁等离子体气动激励抑制高负荷压气机叶栅角区流动分离实验[J]. 航空动力学报,2013,09:2129-2139.
[17]  Zhao Qin, Wu Yun, Li Yinghong, et al. Experiment of flow separation control in highly loaded compressor cascade corner by end-wall plasma aerodynamic actuation[J]. Journal of Aerospace Power, 2013,09:2129-2139.
[18]  刘波,曹志远,魏巍,史磊. 级环境下附面层抽吸对对转压气机性能的影响[J]. 航空动力学报,2013,04:885-892.
[19]  Liu Bo, Cao Zhiyuan, Wei Wei, et al. Effects of boundary layer suction in multistage on counter-rotating compressor environment[J]. Journal of Aerospace Power, 2013,04:885-892.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133