Yamada,A.; Chung, S. C. Crystal chemistry of the olivine-type Li(MnyFe1-y)PO4 and (MnyFe1-y)PO4 as possible 4 V cathode materials for lithium batteries[J]. Journal of The Electrochemical Society, 2001, 148(8): A960-A967.
[2]
Wang G X, Bewlay S, Yao J, et al. Characterization of LiMxFe1-xPO4 (M=Mg, Zr, Ti) cathode materials prepared by the sol-gel method[J]. Electrochemical and Solid-State Letters, 2002, 7(12): A503-A506.
[3]
Ren M M, Zhou Z, Li Y Z, et al. Preparation and electrochemical studies of Fe-doped Li3V2(PO4)3 cathode materials for lithium-ion batteries[J]. Journal of Power Sources, 2006, 162(2): 1357-1362.
[4]
Barker J, Gover R K B, Burns P, et al. The effect of Al substitution on the electrochemical insertion properties of the lithium vanadium phosphate, Li3V2(PO4)3[J]. Journal of The Electrochemical Society, 2007, 154(4): A307-A313.
[5]
Zheng J C, Li X H, Wang Z X. LiFePO4 with enhanced performance synthesized by a novel synthetic route[J]. Journal of Power Sources, 2008, 184(2): 574-577.
[6]
Sun C S, Zhou Z, Xu Z G, et al. Improved high-rate charge/discharge performances of LiFePO4 via V-doping[J]. Journal of Power Sources, 2009, 193(2): 841-845.
[7]
Liu K Y (刘开源), Huang J S (黄建书), Yang L(杨立). Effects of different carbon sources on performance of Li3V2(PO4)3/C composite cathode materials[J]. Journal of Electrochemistry (电化学), 2010, 16(1): 30-34.
[8]
Wang L N, Li Z C, Xu H J, et al. Studies of Li3V2(PO4)3 additives for the LiFePO4 based Li ion batteries[J]. The Journal of Physical Chemistry C, 2008, 112(1): 308-312.
[9]
Padhi A K, Nanjundaswamy K S, Goodenough J B. Phospho-olivines as positive-electrode materials for rechargeable lithium batteries[J]. Journal of The Electrochemical Society, 1997, 144(4): 1188-1194.
[10]
Chung S Y, Bloking J T, Chiang Y M. Electronically conductive phospho-olivines as lithium storage electrodes[J]. Nature Materials, 2002, 1(2): 123-128.
[11]
Li T (李婷), Qian J F (钱江峰), Cao Y L (曹余良), et al. Electrochemical Performance of Li1-xMxFePO4 Cathode Materials Synthesized by Polymer Pyrolysis Poute[J]. Journal of Electrochemistry (电化学), 2007, 13(2): 136-139.
[12]
Huang H, Yin S C, Nazar L F. Approaching theoretical capacity of LiFePO4 at room temperature at high rates. Electrochemical and Solid-State Letters, 2001, 4(1): A170-A172.
[13]
Franger S, Cras F L, Bourbon C, et al. LiFePO4 synthesis routes for enhanced electrochemical performance[J]. Electrochemical and Solid-State Letters, 2002, 5(10): A231-A233.
[14]
Herle P S, Ellis B, Coombs N, et al. Nano-network electronic conduction in iron and nickel olivine phosphates[J]. Nature Materials, 2004, 3(3): 147-152.
[15]
Croce F, Epifanio A D, Hassoun J, et al. A novel concept for the synthesis of an improved LiFePO4 lithium battery cathode[J]. Electrochemical and Solid-State Letters, 2002, 5(3): A47-A50.
[16]
Park K S, Son J T, Chung H T, et al. Surface modification by silver coating for improving electrochemical properties of LiFePO4 [J]. Solid State Communications, 2004, 129(5): 311-314.
[17]
Yang M R, Ke W H, Wu S H. Improving electrochemical properties of lithium iron phosphate by addition of vanadium[J]. Journal of Power Sources, 2007, 165 (2): 646-650.
[18]
Zhao T, Xu W, Ye Q, et al. Local structure of vanadium in doped LiFePO4[J]. Journal of Synchrotron Radiation, 2010, 17: 584-589.
[19]
Zheng J C, Li X H, Wang Z X, et al. Novel synthesis of LiFePO4 -Li3V2(PO4)3 a composite cathode material by aqueous precipitation and lithiation[J]. Journal of Power Sources, 2010, 195(9): 2935-2938.
[20]
Bai Y (白莹), Yang J M (杨觉明), Qing C B (卿春波), et al. Electrochemical Performances of C-Coating and Co-Doping LiFePO4[J]. Journal of Electrochemistry (电化学), 2011, 17(3): 334-338.
[21]
Chen Y (陈宇), Wang Z L (王忠丽), Yu C Y (于春阳), et al. Electrochemical properties of Mo-doped LiFePO4 cathode material[J]. Acta Physico-Chimica Sinica (物理化学学报), 2008, 24(8): 1498-1502.
[22]
Saidi M Y, Barker J, Huang H, et al. Electrochemical properties of lithium vanadium phosphate as a cathode material for lithium-ion batteries[J]. Electrochemical and Solid-State Letters, 2002, 5(7): A149-A151.
[23]
Zheng J C, Li X H, Wang Z X, et al. Characteristics of xLiFePO4 center dot yLi3V2(PO4)3 electrodes for lithium batteries[J]. Ionics, 2009, 15(6): 753-759.
[24]
Yamada A, Koizumi H, Nishimura S, et al. Room-temperature miscibility gap in LixFePO4[J]. Nature Materials, 2006, 5(5): 357-360.
[25]
Meethong N, Huang H Y, Speakman S A, et al. Strain accommodation during phase transformations in olivine-based cathodes as a materials selection criterion for high-power rechargeable batteries[J]. Advanced Functional Materials, 2007, 17(7): 1115-1123.
