Lee S H, Mathews M, Toghiani H, et al. Fabrication of carbon-encapsulated mono- and bimetallic (Sn and Sn/Sb alloy) nanorods-potential lithium-ion battery anode materials[J]. Chemistry of Materials, 2009, 21(11): 2306-2314.
[2]
Guo H, Zhao H L, Jia X D, et al. Synthesis and electrochemical characteristics of Sn-Sb-Ni alloy composite anode for Li-ion rechargeable batteries[J]. Materials Research Bulletin, 2007, 42 (5): 836-843.
[3]
Winter M, Besenhard J O. Electrochemical lithiation of tin and tin-based intermetallics and composites[J]. Electrochimica Acta, 1999, 45(1/2): 31-50.
[4]
Yang J, Winter M, Besenhard J O. Small particle size multiphase Li-alloy anodes for lithium-ion batteries[J]. Solid State Ionics, 1996, 90(1/4): 281-287.
[5]
Yoshinaga H, Kawabata A, Xia Y, et al. New V-Sn alloys prepared by powder metallurgy for lithium battery negative electrode[J]. Journal of the Japan Society of Powder and Powder Metallurgy, 2002 ,49(1): 37-43.
[6]
Kim D G, Kim H, Sohn H J, et al. Nanosized Sn-Cu-B alloy anode prepared by chemical reduction for secondary lithium batteries[J]. Journal of Power Sources, 2002, 104(2): 221-225.
[7]
Mao O, Dunlap R A, Dahn J R. Mechanically alloyed Sn‐Fe(‐C) powders as anode materials for Li‐ion batteries: I. The Sn2Fe?-C? system[J]. Journal of The Electrochemical Society, 1999, 146(2): 405-413.
[8]
Mukaibo H, Momma T, Osaka T. Changes of electro-deposited Sn-Ni alloy thin film for lithium ion battery anodes during charge discharge cycling[J]. Journal of Power Sources, 2005, 146(1/2): 457-463.
[9]
Zhao H L, Yin C L, Guo H, et al. Studies of the electrochemical performance of Sn-Sb alloy prepared by solid-state reduction[J]. Journal of Power Sources, 2007, 174(2): 916-920.
[10]
Yang J, Takeda Y, Imanishi N, et al. Ultrafine Sn and SnSb0.14 powders for lithium storage matrices in lithium-ion batteries[J]. Journal of The Electrochemical Society, 1999, 146(11): 4009-4013.
[11]
]Wolfenstine J, Campos S, Foster D, et al. Nano-scale Cu6Sn5 anodes[J]. Journal of Power Sources, 2002, 109(1): 230-233.
[12]
Mukaibo H, Osaka T, Reale P, et al. Optimized Sn/SnSb lithium storage materials[J]. Journal of Power Sources, 2004, 132(1/2): 225-228.
[13]
Trifonova A, Wachtler M, Wagner M R, et al. Influence of the reductive preparation conditions on the morphology and on the electrochemical performance of Sn/SnSb[J]. Solid State Ionics, 2004, 168(1/2): 51-59.
[14]
Wachtler M, Winter M, Besenhard J O. Anodic materials for rechargeable Li-batteries[J]. Journal of Power Sources, 2002, 105(2):151-160.
[15]
Zhao H L, Zhu Z M, Yin C L, et al. Electrochemical characterization of micro-sized Sb/SnSb composite anode[J]. Materials Chemistry and Physics, 2008, 110(2/3): 201-205.
[16]
Rom I, Wachtler M, Papst I, et al. Electron microscopical characterization of Sn/SnSb composite electrodes for lithium-ion batteries[J]. Solid State Ionics, 2001, 143(3/4): 329-336.
[17]
Wang Z, Tian W H, Li X G. Synthesis and electrochemistry properties of Sn-Sb ultrafine particles as anode of lithium-ion batteries[J]. Journal of Alloys and Compounds, 2007, 439(1/2): 350-354.
[18]
Huang K L (黄可龙), Zhang G (张戈), Liu S Q (刘素琴), et al. Synthesis and eletrochemical performance of Sn-SnSb/graphite composite materials[J]. Chinese Journal of Inorganic Chemistry (无机化学学报), 2006, 22(11): 2076-2079.
