全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
-  2015 

通过载体提高燃料电池催化剂的稳定性
Enhancing Stability of PEM Fuel Cell Catalysts via Support Changing

DOI: 10.13208/j.electrochem.141052

Keywords: 质子交换膜燃料电池,,载体材料,电化学催化,
proton exchange membrane fuel cells
,platinum,support material,electro-catalysis

Full-Text   Cite this paper   Add to My Lib

Abstract:

摘要 Pt/C是目前质子交换膜燃料电池使用最广泛的一种催化剂,制约其实际应用的关键技术之一是稳定性,增强燃料电池催化剂稳定性研究一直是该领域的热点. 本文结合作者课题组的研究工作,综述了通过改进载体材料来提高Pt基催化剂稳定性的一些方法,指出采用更稳定的载体材料以及发展与金属催化剂纳米颗粒有强相互作用的载体材料,是增强催化剂稳定性的努力方向

References

[1]  Vishnyakov. Proton exchange membrane fuel cells[J]. Vacuum, 2006, 80(10): 1053-1065.
[2]  Debe M K. Electrocatalyst approaches and challenges for automotive fuel cells[J]. Nature, 2012, 486(7401): 43-50.
[3]  Gasteiger H A, Kocha S S, Sompalli B, et al. Activity benchmarks and requirements for Pt, Pt-alloy, and none-Pt oxygen reduction catalysts for PEMFCs[J]. Applied Catalysis B: Environmental, 2005, 56(1/2): 9-35.
[4]  Wang J J, Yin G P, Shao Y Y, et al. Effect of carbon black support corrosion on the durability of Pt/C catalyst[J]. Journal of Power Sources, 2007, 171(2): 331-339.
[5]  Shao-Horn Y, Cheng W C, Chen S, et al. Instability of supported platinum nanoparticles in low-temperature fuel cells[J]. Topics in Catalysis, 2007, 46(3/4): 285-305.
[6]  Li X, Colon-Mercado H R, Wu G, et al. Development of method for synthesis of Pt-Co cathode catalysts for PEM fuel cells[J]. Electrochemical and Solid-State Letters, 2007, 10(11): B201-B205.
[7]  Xu F, Wang M X, Sun L, et al. Enhanced Pt/C catalyst stability using p-benzensulfonic acid functionalized carbon blacks as catalyst supports[J]. Electrochimica Acta, 2013, 94: 172-181.
[8]  Urchaga P, Weissmann M, Baranton S, et al. Improvement of the platinum nanopartcles-carbon substrate interaction by insertion of a thiophenol molecular bridge[J]. Langmuir, 25(11): 6543-6550.
[9]  Li Y X(李云霞), Wei Z D(魏子栋), Zhao Q L(赵巧玲), et al. Preparation of Pt/Graphene catalyst and its catalytic performance for oxygen reduction[J]. Acta Physico-Chimica Sinica(物理化学学报), 2011, 27(4): 858-862.
[10]  Hsieh S H, Hsu M C, Liu W L, et al. Study of Pt catalyst on graphene and its application to fuel cell[J]. Applied Surface Science, 2013, 277: 223-230.
[11]  Maiyalagan T, Alaje T O, Scott K. Highly stable Pt-Ru nanoparticles supported on three-dimensional cubic ordered mesoporous carbon (Pt-Ru/CMK-8) as promising electrocatalysts for methanol oxidation[J]. The Journal of Physical Chemistry C, 2012, 116(3): 2630-2638.
[12]  Liu S H, Chiang C C, Wu M T, et al. Electrochemical activity and durability of platinum nanoparticles supported on ordered mesoporous carbons for oxygen reduction reaction[J]. International Journal of Hydrogen Energy, 2010, 35(15): 8149-8154.
[13]  Fujigaya T, Nakashima N. Fuel cell electrocatalyst using polybenzimidazole-modified carbon nanotubes as support materials[J]. Advanced Materials, 2013, 25(12): 1666-1681.
[14]  Jafri R I, Rajalakshmi N, Ranaprabhu S. Nitrogen doped graphene nanoplatelets as catalyst support for oxygen reduction reaction in proton exchange membrane fuel cell[J]. Journal of Materials Chemistry, 2010, 20(34): 7114-7117.
[15]  Zhu J B, Xiao M L, Zhao X, et al. Nitrogen-doped carbon-graphene composites enhanced the electrocatalytic performance of the supported Pt catalysts for methanol oxidation[J]. Chemical Communication, 2014, 50(81): 12201-12203.
[16]  Guo L, Chen S G, Li L, et al. A Co-tolerant Pt-Ru catalyst supported in thiol-functionalized carbon nanotubes for methanol oxidation reaction[J]. Journal of Power Sources, 2014, 247: 360-364.
[17]  Nie Y, Chen S G, Ding W, et al. Pt/C trapped in activated graphitic carbon layers as a highly durable electrocatalyst for oxygen reduction reaction[J]. Chemical Communications, 2014, 50(97), 15431-15434.
[18]  Ho V T T, Pillai K C, Chou H L, et al. Robust non-carbon Ti0.7Ru0.3O2 support with co-catalytic functionality for Pt: enhances catalytic activity and durability for fuel cells[J]. Energy & Environmental Science, 2011, 4(10): 4194-4200.
[19]  Liu Y, Mustain W E. High stability, high activity Pt/ITO oxygen reduction electrocatalysts[J]. Journal of the American Chemical Society, 2013, 135(2): 530-533.
[20]  Xia M R, Ding W, Xiong K, et al. Anchoring effect of exfoliated-montmorillonite-supported Pd catalyst for the oxygen reduction reaction[J]. The Journal of Physical Chemistry C, 2013, 117(20): 10581-10588.
[21]  Liu Y, Mustaiin W E. Structural and electrochemical studies of Pt clusters supported on high-surface-area tungsten carbide for oxygen reduction[J]. ACS Catalysis, 2011, 1(3): 212-220.
[22]  Xie X H, Xue Y, Li L, et al. Surface Al leached Ti3AlC2 as a substitute for carbon use as a catalyst support in a harsh corrosive electrosive electrochemical system[J]. Nanoscale, 2014, 6(19): 11035-11040.
[23]  Xie S F, Choi S I, Lu N, et al. Atomic layer-by-layer deposition of Pt on Pd nanocubes for catalyst with enhanced activity and durability toward oxygen reduction[J]. Nano Letters, 2014, 14(6): 3570-3576.
[24]  Oh H S, Kim H. Noncovalent modification of carbon nanofibers using 2-naphthalenethiol for catalyst supports in PEM fuel cells[J]. Journal of Electrochemical Science and Technology, 2010, 1(2): 92-96.
[25]  Li X, Park S, Popov B N. Highly stable Pt and PtPd hybrid catalysts supported on a nitrogen-modified carbon composite for fuel cell application[J]. Journal of Power Sources, 2010, 195(2): 445-452.
[26]  Maiyalagan T, Viswanathan B, Varadaraju U V. Nitrogen containing carbon nanotubes as supports for Pt-Alternate anodes for fuel cell applications[J]. Electrochemistry Communications, 2005, 7(9): 905-912.
[27]  Huang K, Sasaki K, Adzic R R, et al. Increasing Pt oxygen reduction reaction activity and durability with a carbon-doped TiO2 nanocoating catalyst support[J]. Journal of Materials Chemistry, 2012, 22(33): 16824-16832.
[28]  Chen S G, Wei Z D, Qi X Q, et al. Nanostructured polyaniline-decorated Pt/C@PANI core-shell catalyst with enhanced durability and activity[J]. Journal of the American Chemical Society, 2012, 134(32): 13252-13255.
[29]  Gan L, Du H D, Li B H, et al. Surface-resconstructed graphite nanofibers as a support for cathode catalysts of fuel cells[J]. Chemical Communication, 2011, 47(13): 3900-3902.
[30]  Liu B, Creager S. Silica-sol-templated mesoporous carbon as catalyst support for polymer electrolyte membrane fuel cell applications[J]. Electrochimica Acta, 2010, 55(8): 2721-2726.
[31]  Dou M, Hou M, Liang D, et al. Behaviors of proton exchange membrane fuel cells under oxidant starvation[J]. Journal of Power Sources, 2011, 196(5): 2759-2762.
[32]  Liang D, Dou M, Hou M, et al. Behavior of a unit proton exchange membrane fuel cell in a stack under fuel starvation[J]. Journal of Power Sources, 2011, 196(13): 5595-5598.
[33]  Hasché F, Oezaslan M, Strasser P. Activity, stability and degradation of multi walled carbon nanotube (MWCNT) supported Pt fuel cell electrocatalysts[J]. Physical Chemistry Chemical Physics, 2010, 12(46): 15251-15258.
[34]  Chen K, He S, Peng T, et al. Porous graphene supported Pt catalysts for proton exchange membrane fuel cells[J]. Electrochimica Acta, 2014, 132: 356-363.
[35]  Higgins D, Hoque M A, Seo M H, et al. Development and simulation of sulfur-doped graphene supported platinum with exemplary stability and activity towards oxygen reduction[J]. Advanced Functional Materials, 2014, 24(27): 4325-4336.
[36]  Chen S G, Wei Z D, Guo L, et al. Enhanced dispersion and durability of Pt nanoparticles on a thiolated CNT support[J]. Chemical Communication, 2011, 47(39): 10984-10986.
[37]  Guo L, Chen S G, Wei Z D. Enhanced utilization and durability of Pt nanoparticles supported on sulfonated carbon nanotubes[J]. Journal of Power Sources, 2014, 255: 387-393.
[38]  Xu J Y, Aili D, Li Q F, et al. Antimony doped tin oxide modified carbon nanotubes as catalyst supports for methanol oxidation and oxygen reduction reaction[J]. Journal of Materials Chemistry A, 2013, 1(34): 9737-9745.
[39]  Huang S Y, Ganesan P, Popov B N. Electrocatalytic activity and stability of titania-supported platinum-plladiunm electrocatalysts for polymer electrolyte membrane fuel cell[J]. ACS Catalysis, 2012, 2(5): 825-831.
[40]  Zhang L, Wang L Y, Holt C M B, et al. Oxygen reduction reaction activity and electrochemical stability of thin-film bilayer systems of platinum on niobium oxide[J]. The Journal of Physical Chemistry C, 2010, 114(39): 16463-16474.
[41]  Huang S Y, Ganesan P, Park S. et al. Development of a titanium dioxide-supported platinum catalyst with ultrahigh stability for polymer electrolyte membrane fuel cell applications[J]. Journal of the American Chemical Society, 2009, 131(39): 13898-13899.
[42]  Wang D L, Subban C V, Wang H S, et al. Highly stable and CO-tolerant Pt/Ti0.7W0.3O2 electrocatalyst for proton-exchange membrane fuel cells[J]. Journal of the American Chemical Society, 2010, 132(30): 10218-10220.
[43]  Ho V T T, Pan C J, Rick J, et al. Nanostructured Ti0.7Mo0.3O2 support enhances electron transfer to Pt: High-performance catalyst for oxygen reduction reaction[J]. Journal of the American Chemical Society, 2011, 133(30): 11716-11724.
[44]  Pan Z C, Xiao Y H, Fu Z G, et al. Hollow and porous titanium nitride nanotubes as high-performance catalyst supports for oxygen reduction reaction[J]. Journal of Materials Chemistry A, 2014, 2(34): 13966-13975.
[45]  Wang Y, Song S, Maragou V, et al. High surface area tungsten carbide microspheres as effective Pt catalyst support for oxygen reduction reaction[J]. Applied Catalysis B: Environmental, 2009, 89(1/2): 223-228.
[46]  Zhao Z, Fang X, Li Y, et al. The origin of the high performance of tungsten carbides/carbon nanotubes supported Pt catalysts for methanol eletrooxidation[J]. Electrochemistry Communications, 2009, 11(2): 290-293.
[47]  Xie X H, Chen S G, Ding W, et al. An extraordinarily stable catalyst: Pt NPs supported on two-dimensional Ti3C2X2 (X = OH, F) nanosheets for oxygen reduction reaction[J]. Chemical Communications, 2013, 49(86): 10112-10114.
[48]  You H J, Zhang F L, Liu Z, et al. Free-standing Pt-Au hollow nanourchins with enhanced activity and stability for catalytic methanol oxidation[J]. ACS Catalysis, 2014, 4(9): 2829-2835.
[49]  Xing Y C, Cai Y, Vukmirovic M B, et al. Enhancing oxygen reduction reaction activity via Pd-Au alloy sublayer mediation of Pt monolayer electrocatalysts[J]. The Journal of Physical Chemistry Letters, 2010, 1(21): 3238-3242.
[50]  Zhang L, Wang L Y, Holt C M B, et al. Highly corrosion resistant platinum-niobium oxide-carbon nanotube electrodes for the oxygen reduction in PEM fuel cells[J]. Energy & Environmental Science, 2012, 5(3): 6156-6172.
[51]  Zhou Y K, Neyerlin K, Olson T S, et al. Enhancement of Pt and Pt-alloy fuel cell catalyst activity and durability via nitrogen-modified carbon supports[J]. Energy & Environmental Science, 2010, 3(10): 1437-1446.
[52]  Ding W, Xia M R, Wei Z D, et al. Enhanced stability and activity with Pd-O junction formation and electronic structure modification of palladium nanoparticles supported on exfoliated montmorillonite for the oxygen reduction reaction[J]. Chemical Communications, 2014, 50(50): 6660-6663.
[53]  Liao L, Bian X J, Xiao J J, et al. Nanoporous molybdenum carbide wires as an active electrocatalyst towards the oxygen reduction[J]. Physical Chemistry Chemical Physics, 2014, 16(21): 10088-10094.
[54]  Avasarala B, Murray T, Li W Z, et al. Titanium nitride nanoparticles based electrocatalysts for proton exchange membrane fuel cells[J]. Journal of Materials Chemistry, 2009, 19(13): 1803-1805.
[55]  Zhang R Q, Lee T H, Yu B D, et al. The role of titanium nitride supports for single-atom platinum-based catalysts in fuel cell technology[J]. Physical Chemistry Chemical Physics, 2012, 14(48): 16552-16557.
[56]  Wang R, Xie Y, Shi K, et al. Small-size contacting Pt-WC nanostructures on graphene as highly efficient anode catalysts for direct methanol fuel cells[J]. Chemistry - A European Journal, 2012, 18(24): 7443-7451.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133