| [1] | 战东平，张慧书，李术川，等.AlMnCa合金脱氧和非金属夹杂物控制技术研究［J］.东北大学学报:自然科学版，2006，27(10):1118-1121.(Zhan Dong-ping，Zhang Hui-shu，Li Shu-chuan，et al.Study on the deoxidation and non-metallic inclusion using AlMnCa alloy［J］.Journal of Northeastern University :Natural Science， 2006，27(10):1118-1121.)
|
| [2] | Simpson I D，Tritsiniotis Z，Moore L G.Steel cleanness requirements for X65 to X80 electric resistance welded linepipe steels［J］.Ironmaking and Steelmaking，2003，30(2):158-164.
|
| [3] | Holappa L，Hmlinen M，Liukkonen M，et al.Thermodynamic examination of inclusion modification and precipitation from calcium treatment to solidified steel［J］.Ironmaking and Steelmaking，2003，30(2):111-115.
|
| [4] | 程晓舫，胡宇.钢中夹杂物分析方法探讨［J］.金属制品，2006，32(4):52-54.(Cheng Xiao-fang，Hu Yu.Discussion of the analysis method of the inclusion in steel［J］.Steel Wire Products，2006，32(4):52-54.)
|
| [5] | Guo C J，Yu R Z，Shu Q G，et al.The existence of inter-granular ferrite plates and nucleating inclusions in the heat affected zone of X-60 pipe steel ［J］.Materials Science and Technology，1997，32(11):2985-2989.
|
| [6] | Madariaga I，Gutierrez I.Role of the particle matrix interface on the nucleation of acicular ferrite in a medium carbon micro alloyed steel ［J］.Acta Materialia，1999，47(3):951-960.
|
| [7] | 刘中柱，桑原守.氧化物冶金技术的最新进展及其实践［J］.炼钢，2007，23(4):1-6.(Liu Zhong-zhu，Mamoru Kuwahara.Recent progress in oxide metallurgy technology and its application［J］.Steelmaking，2007，23(4):1-6.)
|
| [8] | Takalnura J I，Mizoguchi S.Roles of oxides in steels performance ［C］//Proceeding of the 6th International Iron and Steel Congress .Nagoya:ISIJ，1990:591.
|
| [9] | Sudarsanam S B.The mechanism of acicular ferrite in weld deposits ［J］.Current Opinion in Solid State and Materials Science，2004，17(8):267-278.
|
| [10] | Eijk V D，Walmsley J.Mechanisms of inclusion in low alloy steel deoxidized with titanium ［J］.Materials Science and Technology，2000，8(1):55-56.
|
| [11] | 尹弘斌，金山同.CAS工艺条件下钢包内夹杂物上浮规律的理论研究［J］.钢铁，1995，30(10):13-17.(Yin Hong-bin，Jin Shan-tong.Theoretical studies on removal of inclusions in CAS ladle treatment process［J］.Iron and Steel，1995，30(10):13-17.)
|
| [12] | Kuiry S C，Ganguly A.Elucidation of inclusion distribution mechanism in continuously cast AISI 316L stainless steel blooms［J］.Ironmaking and Steelmaking，2001，28(6):465-469.
|
| [13] | Tiekink W，Van Den Bogert R，Breedijk T，et al.Some aspects of behavior of calciumin silicon killed steels［J］.Ironmaking and Steelmaking，2003，30(2):146-140.(上接第1268页)
|
| [14] | Tsuya N，Arai K I.Magnetostriction of ribbon-form amorphous and crystalline ferromagnetic alloys［J］.Journal of Applied Physics，1979，50:1658-1661.
|
| [15] | Kusaka K，Imaoka T，Kondo T.Relationship between properties and Si-content sintering conditions of Fe-Si type magnetic alloys［J］.Journal of the Japan Society of Powder and Powder Metallurgy，2000，47(2):195-202.
|
| [16] | Haiji H，Okada K，Hiratani T，et al.Magnetic properties and workability of 6.5% Si steel sheet［J］.Journal Magnetism and Magnetic Materials，1996，160:109-114.
|
| [17] | Combe S C，Audisio S，Degauque J，et al.The magnetic properties of Fe-Si 6.5wt% alloys obtained by a SiCl4-based CVD process［J］.Journal Magnetism and Magnetic Materials，1996，160:151-153.
|
| [18] | Lu K，Lu J.Nanostructured surface layer on metallic materials induced by surface mechanical attrition［J］. Materials Science Engineering，2004，A375/376/377:38-45.
|
| [19] | Tong W P，Tao N R，Wang Z B，et al.Nitriding iron at lower temperatures［J］. Science，2003，299(5607):686-694.
|
| [20] | Wang Z B，Tao N R，Tong W P，et al.Defusion of chromium in nanocrystalline iron produced by means of surface mechanical attrition treatment［J］.Acta Materialia，2003，51(14):4319-4329.
|
| [21] | Tong W P，Han Z，Wang L M，et al.Low-temperature nitriding of 38CrMoAl steel with a nanostructured surface layer induced by surface mechanical attrition treatment［J］.Surface & Coatings Technology，2008，202:4957-4963.
|
| [22] | Tao N R，Wang Z B，Tong W P，et al.An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment［J］.Acta Materialia，2002，50(18):4603-4616.
|
| [23] | 王爱香，刘刚，周蕾，等.表面机械研磨处理316L不锈钢表层结构及硬度的热稳定性［J］.金属学报，2005，41(6):577-582.(Wang Ai-xiang，Liu Gang，Zhou Lei，et al.Thermal stability of structure and hardness of the surface layer of 316L stainless steel after surface mechanical attrition treatment［J］.Acta Metallurgica Sinica，2005，41(6):577-582.)
|
