蒋力.铝板冷轧分段冷却热辊形仿真模型研究 ［D］.北京:北京科技大学，2013.(Jiang Li.Simulation model of work roll’s subsectional cooling thermal expansion during aluminum cold rolling ［D］.Beijing:University of Science and Technology Beijing，2013.)
[2]
Qing X H，Cun L Z，Zheng Y J，et al.Four-high cold rolling mill for control of edge-drop and thrust force ［J］.Advanced Materials Research，2010，145:57-60.
[3]
Zhang Y，Yang Q，Wang X C，et al.Analysis of cold-rolled strip profile in UCM mill by finite element method ［J］.Key Engineering Materials，2010，443:21-26.
[4]
Abdelkhalek S， Montmitonnet P， Potier-Ferry M，et al.Strip flatness modelling including buckling phenomena during thin strip cold rolling ［J］.Ironmaking and Steelmaking，2010，37(4) :290-297.
[5]
刘鸿文.材料力学 ［M］ .北京:高等教育出版社，1992.(Liu Hong-wen.Mechanics of materials［M］.Beijing:Higher Education Press，1992.)
[6]
王国栋.板形控制和板形理论 ［M］ .北京:冶金工业出版社，1986.(Wang Guo-dong.Strip shape control and shape theory ［M］.Beijing:Metallurgical Industry Press，1986.)
[7]
Johnson K L.Contact mechanics ［M］.London :Cambridge University Press，1985.
[8]
刘力文，张树堂，武志平，等.张力对冷轧板带变形的影响［J］.钢铁，2000，35(4):37-39.(Liu Li-wen，Zhang Shu-tang，Wu Zhi-ping，et al.Influence of tention on the deformation of strip during cold rolling ［J］.Iron and Steel，2000，35(4):37-39.)
[9]
杜晓钟.高精度硅钢冷连轧机边部减薄机理及控制技术研究 ［D］.北京:北京科技大学，2009.(Du Xiao-zhong.Research on mechanics of edge drop and its control technology in cold strip mill for high precision silicon steel ［D］.Beijing:University of Science and Technology Beijing，2009.)
[10]
Edwards W J，Spooner P D.Analysis of strip shape ［C］//Bryand G F.Automation of Tandem Mills.London:The Iron and Steel Institute，1973:177-182.
[11]
李勇华，邸洪双，刘光明，等.CVC冷轧机承载辊缝凸度调节域计算模型 ［J］.轧钢，2011，28 (2):8-12.(Li Yong-hua，Di Hong-shuang，Liu Guang-ming，et al.Model of CVC cold rolling mill loaded roll gap crown control room ［J］.Steel Rolling，2011，28 (2):8-12.)
