［1］Baker L J，Daniel S R，Parker J D.Metallurgy and processing of ultralow carbon bake hardening steels［J］.Materials Science and Technology，2002，18(4):355-368.
[2]
Tse Y Y，Duggan B J.Orientation imaging microscopy studies of recrystallization in interstitialfree steel［J］.Metallurgical and Material Transactions A，2006，37:1055-1064.
[3]
Chen J P，Kang Y L，Hao Y M，et al.Microstructure and properties of Ti and Ti+Nb ultralowcarbon bake hardened steels［J］.Journal of Iron and Steel Research，International，2009，16(6):33-40.
[4]
Massardier V，Ngansop A，Fabrègue D，et al.Microstructure and mechanical properties of low carbon Alkilled steels after ultrarapid annealing cycles［J］.Materials Science Forum，2010，638:3368-3373.
[5]
侯自勇，许云波，吴迪.超快速退火下超低碳钢的再结晶行为研究［J］.金属学报，2012，48(9):1057-1066.(Hou Ziyong，Xu Yunbo，Wu Di.Recrystallization of ultralow carbon steel sheet after ultrarapid annealing［J］.Acta Metallurgica Sinica，2012，48(9):1057-1066.)
[6]
杨平，李志超，毛卫民，等.钢中{111}<112>再结晶织构的形成［J］.材料热处理学报，2009，30(3):46-52.(Yang Ping，Li Zhichao，Mao Weimin，et al.Formation of the {111}<112>annealing texture in steels［J］.Transactions Material and Heat Treatment，2009，30(3):46-52.)
[7]
徐祖耀.材料科学基础［M］.上海:上海交通大学，2006:1-436.(Xu Zuyao.Fundamentals of materials science［M］.Shanghai:Shanghai Jiao Tong University，2006:1-436.)
[8]
Doherty R D，Hughes D A，Humphreys F J，et al.Current issues in recrystallization:a review［J］.Materials Science and Engineering A，1997，238:219-274.
[9]
Muljono D，Ferry M，Dunne D P.Influence of heating rate on anisothermal recrystallization in low and ultralow carbon steels［J］.Materials Science and Engineering A，2001，303:90-99.
[10]
Ray R K，Jonas J J，Hook R E.Cold rolling and annealing textures in low and extra low carbon steels［J］.International Materials Reviews，1994，39(4):129-172.
[11]
Doherty R D.Recrystallization and texture［J］.Progress in Marerials Science，1997，42:39-58.
[12]
于凤云，王轶农，蒋奇武.深冲IF钢再结晶{111}纤维织构形成机制探讨［J］.材料科学与工艺，2008，16(5):724-727.(Yu Fengyun，Wang Yinong，Jiang Qiwu.Formation mechanism of {111} recrystallization texture in IF steel［J］.Material Science and Technology，2008，16(5):724-727.)
[13]
RuizAparicio L J，Garcia C I，De Ardo A J.Development of {111} transformation texture in interstitialfree steels［J］.Metallurgical and Materials Transactions A，2011，32:2325-2334.一位数()
