全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

打印机光谱特性化方法研究综述

DOI: 10.11834/jig.20140701

Keywords: 可见光谱,打印机特性化,墨量限制,光谱预测,光谱分色,光谱匹配度量

Full-Text   Cite this paper   Add to My Lib

Abstract:

目的打印输出技术是目前国内外图像复制领域的主流技术。打印机特征化旨在建立打印机输入控制值与输出色彩信息值之间的对应关系,保证打印输出图像各像素色彩值的准确性。基于可见光谱的打印机特性化过程,以图像光谱信息作为打印机特性化过程中的色彩控制依据,可避免基于色度的打印输出过程所固有的同色异谱问题,实现图像色彩复制领域最高级别的无条件颜色匹配。在广泛文献调研的基础上,本文回顾了打印机光谱特性化方法各部分研究的发展历程,分析介绍了该领域主要研究内容及其研究现状,对打印机光谱特性化方法流程进行了较为全面的综述。方法以Yule-Nielsen修正的光谱Neugebauer模型(YNSN模型)为典型代表,从打印机墨量限制方法、正向光谱预测模型、反向光谱分色模型以及色彩匹配评价度量4个方面,对目前基于可见光谱的打印机特性化方法研究情况进行了总结与归纳,并结合现有研究存在的问题对未来研究发展趋势进行了展望。结果综合近几年该领域研究发展情况,认为目前打印机光谱特性化方法研究在墨量限制算法合理性、正反向建模精度等方面已经取得了较为理想的结果。然而,尽管已有20多年的广泛研究,鉴于光谱数据的高维性以及具体应用场景的多样性,导致准确而高效的实现光谱打印机特性化仍然是一个极具难度的问题,特别在建模效率提高、模型适用性增强、模型物理意义提升以及评价度量综合性能优化等方面,目前研究仍存在较大的研究发展空间。结论打印机光谱特性化是实现图像色彩信息高保真打印复制的必要手段,其今后将继续在图像复制领域起到非常关键作用。然而,由于基于光谱的打印机特性化过程涉及光谱学及色度学理论、半色调呈色理论、最优化计算理论、人眼视觉机理、数字加网技术等多种理论与技术,故其研究具有一定的难度与挑战性。本文对打印机光谱特性化方法研究现状进行了较为深入的介绍与分析,意在使国内同行对该领域有一个较为全面的了解,以期引起更多研究者对该领域的关注。由于篇幅所限,许多问题未及深究。

References

[1]  Yao H G. Ink Jet Printing[M].Beijing: Graphic Communication Press,2011: 12-18.[姚海根.喷墨印刷[M].北京:印刷工业出版社,2011:12-18.]
[2]  Xu Y F. Color Management Principles and Applications[M].Beijing: Graphic Communication Press,2011: 22-30.[徐艳芳.色彩管理原理与应用[M].北京:印刷工业出版社,2011:22-30.]
[3]  Koenderink J J. Color for the Sciences[M]. Cambridge, MA:The MIT Press,2010: 210-214.
[4]  Bianco S,Colombo A,Gasparini F,et al. Digital Imaging for Cultural Heritage Preservation: Analysis,Restoration,and Reconstruction of Ancient Artworks[M]. Boca Raton,FL,USA: CRC Press,Inc. 2011,183.
[5]  Liu Z,Wan X X,Huang X G,et al. The study on spectral reflectance reconstruction based on wideband multi-spectral acquisition system[J]. Spectroscopy and Spectral Analysis,2013,33(4):1076-1081.[刘振,万晓霞,黄新国,等. 基于宽带多通道的光谱反射率重建方法研究[J]. 光谱学与光谱分析,2013,33(4):1076-1081.][DOI: 10.3964/j.issn.1000-0593(2013)04-1076-06.]
[6]  Yang W P,Xu N,Duan J J,et al. Application and development of multispectral imaging technology in color reproduction[J]. Journal of Yunnan University of Nationalities: Natural Sciences Edition,2009,18(3):191-197.[杨卫平,徐楠,段剑金,等. 多光谱成像技术在颜色复制方面的应用及发展[J].云南民族大学学报:自然科学版,2009,18(3):191-197.]
[7]  Wang B Y,Xu H S,Luo M R,et al. Spectral-based color separation method for a multi-ink printer[J]. Chinese Optics Letters,2011,9(6):063301(1-4).[DOI:10.3788/COL201109. 063301]
[8]  Guo J Y,Xu H S,Luo M R,et al. Spectral characterisation of colour printer based on a novel grey component replacement method[J]. Chinese Optics Letters,2011,7(9): 073301(1-4).[DOI: 10.3788/COL201109.073301]
[9]  Guo J Y,Xu H S,Luo M R. Novel spectral characterization method for color printer based on the cellular neugebauer model[J]. Chinese Optics Letters,2010,11(8): 1106-1109.[DOI: 10.3788/COL20100811.1106]
[10]  Shen H L,Zheng Z H,Jin C C,et al. Adaptive characterization method for desktop color printers[J]. Journal of Electronic Imaging,2013,22(2):023012(1-9).[DOI:10.1117/1. JEI. 22.2.029801]
[11]  Jin C C,Shen H L,Shao S J,et al. Color characterization method for colorful inkjet printers[J]. Acta Optica Sinica, 2011,31(12): 308-312.[金崇超,沈会良,邵思杰,等.一种彩色喷墨打印机的颜色特性化方法[J]. 光学学报, 2011,31(12):308-312.][DOI:10.3788/aos201131.1233001.]
[12]  Wyble D R,Berns R S. A critical review of spectral models applied to binary color printing[J]. Color Research & Application,2000,25(1):4-19.[DOI:10.1002/(SICI)1520-6378(200002)25:1<4::AID-COL3>3.0.CO;2-X]
[13]  Liu Q,Wan X X. Study on ink restriction of ink-jet printing based on spectral gamut maximization[J]. Spectroscopy and Spectral Analysis,2013,33(6):1636-1641[刘强,万晓霞. 基于光谱色域最大化的喷墨打印墨量限制方法研究[J]. 光谱学与光谱分析,2013,33(6):1636-1641]
[14]  Liang Y M,Cheng C X,Bao W C,et al. Comparative study of ink-jet color proofing systems based on color management[J]. Journal of Beijing Institute of Graphic Communication,2012,20(4):9-11,16.[梁艳梅,程常现,鲍伟成,等. 基于色彩管理的彩色喷墨打样系统比较研究[J]. 北京印刷学院学报,2012,20(4): 9-11,16.]
[15]  Guo G,Xu Y F,Nan L,et al. Analysis of the influence of black plate and total ink amount restriction on output device\'s color performance[J]. Information Recording Materials,2011,12(1):19-22.[郭歌,徐艳芳,南林,等.黑版及总墨量限制对输出设备颜色表现能力的影响分析[J]. 信息记录材料,2011,12(1):19-22.]
[16]  Ferilli S. Automatic Digital Document Processing and Management[M]. Berlin: Springer-Verlag London Limited,2011.[DOI:10.1007/978-0-85729-198-1].
[17]  Tzeng D Y,Berns R S. Spectral-based six-color separation minimizing metamerism[C]//Proceedings of IS&T/SID Eight Color Imaging Conference. Scottsdale,AZ,United States: Society for Imaging Science and Technology,2000:342-347.
[18]  Chen Y,Berns R S,Taplin L A,et al. Six color printer characterization using an optimized cellular yule-nielsen spectral neugebauer model[J]. Journal of Imaging Science and Technology,2004,48(6):519-528.
[19]  Urban P. Ink limitation for spectral or color constant printing[R]. Germany: Technische Universit?t Darmstadt,2006.
[20]  Wang Y,Zeng P,He X F,et al. Spectral color calibration method for the multi-ink printer using the look-up table[J]. Journal of Xidian University,2010,37(1):41-48.[王莹,曾平,何秀芳,等. 采用查找表的超四色打印光谱色彩校正方法[J]. 西安电子科技大学学报:自然科学版,2010,37(1):41-48.]
[21]  更多...
[22]  Chen T,Li W,Zhao D B,et al. Press characterization recalibration by principal component analysis and debp model[J]. Applied Mechanics and Materials,2012,200: 670-675.[DOI:10.4028/www.scientific.net/AMM.200.670]
[23]  Zuffi S,Schettini R. Modeling dot gain and inks interaction[C]//Final Program and Proceedings-IS and T/SID Color Imaging Conference. Scottsdale,AZ,United States: Society for Imaging Science and Technology,2004:181-186.
[24]  Zhao C F,Han Q,Chi C C,et al. Effective dot area\'s calculating based on ynsn model[J]. Applied Mechanics and Materials,2013,262: 40-43.[DOI:10.4028/www.scientific.net/AMM. 262.40]
[25]  Xing W,Zhang Y. Spectral prediction model for variable dot-size ink jet presswoke[C]//Proceedings of SPIE-The International Society for Optical Engineering. Bellingham,United States: SPIE,2012: 82921E(1-6).[DOI:10.1117/12.905735]
[26]  Qu Y Y,Gooran S. A simple color prediction model based on multiple dot gain curves[C]//Proceedings of SPIE-The International Society for Optical Engineering. Bellingham,United States: SPIE,2011,786615(1-8).[DOI:1 0.1117/12.871620]
[27]  Machizaud J, Hébert M. Spectral reflectance and transmittance prediction model for stacked transparency and paper both printed with halftone colors[J]. JOSA A,2012,29(8): 1537-1548.[DOI:10.1364/JOSAA.29.001537]
[28]  Hebert M,Hersch R D. Analyzing halftone dot blurring by extended spectral prediction models[J]. Journal of the Optical Society of America A: Optics and Image Science,and Vision,2010,27(1):6-12.[DOI:10.1364/JOSAA.27.000006]
[29]  Murray A. Monochrome reproduction in photoengraving[J]. Journal of the Franklin Institute,1936,221(6): 721-744.
[30]  Kang H R. Computational Color Technology[M]. Bellingham:SPIE-International Society for Optical Engineering,2006.
[31]  Namedanian M,Gooran S. High resolution analysis of optical and physical dot gain[C]//Proceedings of Technical Association of Graphic Arts. Rochester,United States: TAGA,2010:48-51.
[32]  Neugebauer H E J. Die theoretischen grundlagen des mehrfarbenbuchdrucks[J]. Zeitschrift fur Wissenschaftliche Photographie Photophysik and Photochemie,1937,36(4): 73-89.
[33]  Yule J A C,Nielsen W J. The penetration of light into paper and its effect on halftone reproduction[C]//Proceedings of Technical Association of Graphic Arts. Rochester,United States: TAGA,1951:231-242.
[34]  Heuberger K J. Color Transformations and lookup tables[C]//Proceedings of Technical Association of Graphic Arts. Rochester,United states: TAGA,1992:863-891.
[35]  Rolleston R,Balasubramanian R. Accuracy of various types of neugebauer model[C]//Final Program and Proceedings-IS and T/SID Color Imaging Conference. Scottsdale,AZ,United States: Society for Imaging Science and Technology,1993:32-37.
[36]  Wang B Y,Xu H S,Luo M R,et al. Maintaining accuracy of cellular yule-nielsen spectral neugebauer models for different ink cartridges using principal component analysis[J]. Journal of the Optical Society of America A: Optics and Image Science,and Vision,2011,28(7):1429-1435.[DOI:10.1364/JOSAA. 28. 001429]
[37]  Parraman C,Wang Y. Printability beyond the limits: alternative double printing method for inkjet[C]//Color Imaging XIV: Displaying,Processing,Hardcopy,and Applications. San Jose,CA,United States: SPIE, 2009: 72411G(1-7).[DOI: 10.1117/12.805708]
[38]  Arney J S,Engeldrum P G,Zeng H. Expanded murray-davies model of tone reproduction in halftone imaging[J]. Journal of Imaging Science and Technology,1995,39(6): 502-508.
[39]  Engeldrum P G. The color between the dots[J]. The Journal of imaging science and technology,1994,38(6): 545-551.
[40]  Hersch R D,Emmel P,Collaud F,et al. Spectral reflection and dot surface prediction models for color halftone prints[J]. Journal of Electronic Imaging,2005,14(3):033001-033012.[DOI:10.1117/1.1989987]
[41]  Balasubramanian R. The use of spectral regression in modeling halftone color printers[C]//IS&T/OSA Optics & Imaging in the Information Age Proceedings, 1996:372-375.
[42]  Lewandowski A,Ludl M,Byrne G,et al. Applying the yule-nielsen equation with negative N[J]. Journal of the Optical Society of America A: Optics and Image Science,and Vision,2006,23(8):1827-1834.[DOI:10.1364/JOSAA.23.001827]
[43]  Xu J L,Xu J F. Review of optical dot gain and discussion of dot percentage[J].China Printing and Packaging Study,2012,4(1):1-6,13.[徐锦林,徐军飞.光学网点增大研究综述及网点面积率探讨[J].中国印刷与包装研究,2012,4(1):1-6,13.]
[44]  Lino K,Berns R S. Building color-management modules using linear optimization I. desktop color system[J]. The Journal of Imaging Science and Technology,1998,42(1): 79-94.
[45]  Rossier R, Hersch R. Ink-dependent n-factors for the yule-nielsen modified spectral neugebauer model[C]//Proceedings of the 5th European Conference on Colour in Graphics,Imaging and Vision and 12th International Symposium on Multispectral Colour Science 2010. Joensuu,Finland: Society for Imaging Science and Technology, 2010: 202-210.
[46]  Ruckdeschel F R, Hauser O G. Yule-nielsen effect in printing: a physical analysis[J]. Applied Optics,1978,17(21): 3376-3383.
[47]  Shiraiwa Y,Mizuno T. Equation to predict colors of halftone prints considering the optical property of paper[J]. Journal of Imaging Science,1993,37(4): 385-391.
[48]  Soler P,Arnabat J. Efficient color printer characterization based on extended neugebauer spectral models[C]//Proceedings of SPIE-The International Society for Optical Engineering. Bellingham WA,United States: SPIE,2007:64930S(1-8).[DOI:10.1117/12.704561]
[49]  Rossier R,Bugnon T,Hersch R D. Introducing ink spreading within the cellular yule-nielsen modified neugebauer model[C]//Proceedings of the 18th Color and Imaging Conference: Color Science and Engineering Systems,Technologies,and Applications,Technical Papers and Proceedings. Springfield,United States:Society for Imaging Science and Technology,2010: 295-300.
[50]  Stokes M,Fairchild M D,Berns R S. Precision requirements for digital color reproduction[J]. ACM Transactions on Graphics,1992,4(11): 406-422.[DOI:10.1145/146443.146482]
[51]  Velho L,Frery A,Gomes J. Digital halftoning.[M]//Image Processing for Computer Graphics and Vision. Dordrecht,Netherland: Springer,2009:313-344.
[52]  Rogers G L. Neugebauer revisited: random dots in halftone screening[J]. Color Research and Application,1998,23(2):104-113.[DOI:10.1002/(SICI)1520-6378(199804)23:2<104::AID-COL6>3.3.CO;2-9]
[53]  Amidror I,Hersch R D. Neugebauer and demichel: dependence and independence in n-screen superpositions for colour printing[J]. Color Research and Application,2000,25(4): 267-277.[DOI:10.1002/1520-6378(200008)25:4<267::AID-COL7>3.0.CO;2-M]
[54]  Chong E K,Zak S H. An Introduction to Optimization[M].New York:Wiley,2013:108-115.[DOI:10.1109/MAP. 1996. 500234]
[55]  Urban P,Rosen M, Berns R. Fast spectral-based separation of multispectral images[C]//Final Program Proc. IS T SID Color Imaging Conf. Springfield,VA,United States:Society for Imaging Science and Technology,2007:178-183.
[56]  Li C J,Luo M R. Further accelerating the inversion of the yule-nielson modified neugebauer model[C]//Final Program Proc. IS T SID Color Imaging Conf. Springfield,VA,United States:Society for Imaging Science and Technology,2008:84-88.
[57]  Wang B Y,Xu H S,Luo M R. Color separation criteria for spectral multi-ink printer characterization[J].Chinese Optics Letters,2012,10(1):013301(1-4).[DOI:10.3788/COL201210. 013301]
[58]  Wang Y F,Zeng P,Wang Y,et al. Multi-channel printer characterization based on gamut partition[J].Acta Electronica Sinca,2010,38(3):507-511.[王义峰,曾平,王莹,等. 基于色域划分的多通道打印机色彩校正. 电子学报,2010,38(3):507-511.]
[59]  Monga V, Wang S G. System and Method for Halftone Independent Temporal Color Drift Correction in Hi-Addressability Xerographic Printers: US,8274706[P]. 2012-09-25.
[60]  Wang S G,Bala R, Monga V. Halftone Independent Color Drift Correction: US,7724406[P]. 2010-03-17.
[61]  Imai F H,Rosen M R,Berns R S. Comparative study of metrics for spectral match quality[C]//Proceedings of Conference on Colour in Graphics. Imaging and Vision. Poitiers,France: Society for Imageing Science and Technology,2002: 492-496.
[62]  López-lvarez M A,Hern?ndez-Andrés J,Valero E,et al. Colorimetric and spectral combined metric for the optimization of multispectral systems[C]//Proceedings of the 10th Congress of the International Colour Association. Granada,Spain: International Colour Association, 2005: 1685-1688.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133