| [1] | Б.Д.卡洽诺夫斯基.船闸水力学［M］.北京: 水利出版社， 1957．
|
| [2] | Б.Д.Caccia Malinowski.Lock Hydraulics ［M］.Beijing: Hy- 第1 期 陈 明，等: 船闸输水系统水动力学研究综述 159 draulic Press，1997．
|
| [3] | Kolkman P A.Low-Head Navigation Lock Door Filling and Emptying Systems Developed Hydraulic Investigation［M］.Delft，Netherlands: Delft Hydraulics Laboratory，1973．
|
| [4] | 西德运河交通工程考察报告［R］.北京: 交通部赴西德运河交 流工程考察小组，1 978．
|
| [5] | West Germany Canal Traffic Engineering Investigation Report ［R］.Beijing: The Ministry of Transport Invetigation Team to West Germany Canal Engineering Communication， 1978．
|
| [6] | Ables J H，Boyd M B.Filling and Emptying System Cannelton Main Lock，Ohio River，and Generalized Tests of Sidewall Port Systems for 110-by 1200-ft Locks.Hydraulic Model Investigation ［R］.Vicksburg: U.S.Army Engineer Waterways Experiments Station，1966: 2-713．
|
| [7] | Hite J E.Model Study of Marmet Lock Filling and Emptying System， Kanawha River［R］.Vicksburg: U.S.Army Engineer Waterways Engineer Station，1999．
|
| [8] | Pickett E B，Neilson F M.Lock Hydraulic System Model and Prototype Study Data［R］.Vicksburg: U.S.Army Engineer Waterways Experiment Station，1988．
|
| [9] | Division Hydraulic Laboratory.Navigation Lock for Lower Granite Dam Snake River，Washington; Hydraulic Model Investigation ［R］.Bonneville: U.S.Army Engineer Division，1979．
|
| [10] | George J F.Filling and Emptying System，Water Bouldin Lock， and Lock Culvert Valve for Coosa River Waterway［R］.Vicksburg: U.S.Army Engineer Waterways Engineer Station，1984．
|
| [11] | Hite J E.In-Chamber Longitudinal Culvert Design for Lock Filling and Emptying System［R］.Vicksburg: U.S.Army Engineer Waterways Engineer Station，2003．
|
| [12] | 陈泰春.葛洲坝1 号船闸输水系统水力学模型试验研究［J］． 水利水运科学研究， 1990( 1) : 11-21．
|
| [13] | Li Yun，Hu Yaan，Xuan Guoxiang.Advances in study on hydraulics of navigation lock［J］.Journal of Hydrodynamics in A Series， 1999，14( 2) : 232-238．
|
| [14] | JTJ 26l—266 船闸设计规范( 试行) ［S］.北京: 人民交通出版 社，1 987．
|
| [15] | JTJ 261—266 Shiplock Design Code ( Trial Implementation) ［S］． Beijing: China Communications Press，1987．
|
| [16] | 刘宝军.超高水头船闸消能工型式及消能效果对比研究［D］． 重庆: 重庆交通大学，2 006．
|
| [17] | Wang Lingling，Dai Huichao，Wang Qiong.Development of hydraulics numerical laboratory and its application to Three Gorges project［J］.Journal of Hohai University: Natural Science，2004， 32( 1) : 100-103．
|
| [18] | 王智娟，江耀祖，吴英卓，等.银盘船闸阀门段体型优化三维数 值模拟研究［J］.人民长江，2 008，39( 4) : 91-93．
|
| [19] | Wang Zhijuan，Jiang Yaozu，Wu Yingzhuo，et al.The 3D numerical simulation study on valve pattern optimization for Yinpan lock ［J］.Yangtz River，2008，39( 4) : 91-93．
|
| [20] | ［31］ 马峥，张计光，陈红勋，等.三峡永久船闸输水廊道水动力学特 性研究［J］.水动力学研究与进展( A 辑) ，2007，22 ( 2) : 175- 181．
|
| [21] | ［34］ 李洪奇.高水头船闸阀门启闭过程及体型优化三维数值模拟研 究［D］.重庆: 重庆交通大学， 2009．
|
| [22] | Li Hongqi.The 3D Numerical Simulation Study on High Head Lock Valves Opening and Closing Process and Pattem Optimization ［D］． Chongqing: Chongqing Jiaotong University，2009．
|
| [23] | ［35］ Ables，Jackson H.Filling and emptying system for Bay Springs Lock Tmnnessee-Tombigee Waterway ［R］，Mississippi: Hydraulic Model Investigation，1978．
|
| [24] | ［39］ 梁川，谢省宗.三峡船闸输水隧洞反弧门后廊道体型空化模型 试验［J］.四川大学学报: 工程科学版，2 000，12 ( 2) : 4-7．
|
| [25] | Liang Chuan，Xie Shengzong.Study on cavitation experiment of gallery shape back of ogee gate of lock water conveyance tunnel in Three Gorges［J］.Journal of Sichuan University: Engineering Science， 2000，12 ( 2) : 4-7．
|
| [26] | ［40］ JTJ 306—2001 船闸输水系统设计规范［S］.北京: 人民交通出 版社，2 011．
|
| [27] | JTJ306—2001 Design Code of Filling and Emptying System for Shiplocks ［S］.Beijing: China Communications Press， 2011．
|
| [28] | ［41］ Richard L S.Modeling Hydrodynamic Forces on Vessels During Navigation Lock Operations［C］.ASCE: Hydraulic Measurements and Experimental Methods，2004．
|
| [29] | Chen Taichun.Hydraulic model tests on filling and emptying system of Gezhouba 1st lock［J］.Hydro-Science and Engineering， 1990( 1) : 11-21．
|
| [30] | 黄岳，宣国祥，张瑞凯.船闸水力学试验数据采集处理系统 ［J］.水利水运科学研究，1 996 ( 1) : 70-75．
|
| [31] | Huang Yue，Xuan Guoxiang，Zhang Ruikai.Data collecting and analyzing system for hydraulic model test of ship locks［J］.Hydro- Science and Engineering，1996 ( 1) : 70-75．
|
| [32] | 李云，胡亚安，宣国祥.通航船闸水力学研究进展［J］.水动力 学研究与进展A 辑，1 999，14( 2) : 232-238．
|
| [33] | Liu Baojun.Comparative Study on Energy Dissipater Type and Energy Dissipation Effect ［D］.Chongqing: Chongqing Jiaotong University， 2006．
|
| [34] | 黎贤访.船闸分散输水系统闸室水动力学研究［D］.南京: 南 京水利科学研究院， 2010．
|
| [35] | Li Xianfang.Study on Hydrodynamics of Lock Chamber of Longitudinal Filling and Emptying System for Navigation Lock［D］.Nanjing: Nanjing Hydraulic Research Institute，2010．
|
| [36] | 刘平昌，周家俞，王召兵，等.渠江金盘子船闸输水系统水力学 原型观测研究［J］.重庆交通大学学报: 自然科学版，2 011，30 ( 6) : 1396-1399．
|
| [37] | Liu Pingchang，Zhou Jiayu，Wang Zhaobing，et al.Hydraulics prototype observation on conveyance system of the Jinpanzi power station in Qujiang river［J］.Journal of Chongqing Jiaotong University: Natural Science，2011，30( 6) : 1396-1399．
|
| [38] | 李云，徐新敏，魏文炜.三峡临时船闸人字门运行方式原型观 测［J］.水利水运工程学报，2 003 ( 2) : 29-35．
|
| [39] | Li Yun，Xu Xinmin，Wei Wenwei.Prototype tests on operating manner of miter gates in Three-Gorge temporary shiplock［J］． Hydro-Science and Engineering，2003 ( 2) : 29-35．
|
| [40] | 胡亚安，郑楚佩，卞兆盛.葛洲坝1 号船闸阀门门楣通气设施 原型观测研究［J］.水运工程， 1995( 6) : 28-32．
|
| [41] | Hu Yaan，Zheng Chupei，Bian Zhaosheng.Prototype tests on natural aeration measures of Gezhouba No.1 Shiplock valve［J］.Port ＆ Waterway Engineering，1995( 6) : 28-32．
|
| [42] | 骆少泽，樊宝康，胡亚安.三峡船闸输水阀门动特性研究［J］． 工程力学，2 009( 增刊1) : 185-188．
|
| [43] | Luo Shaoze，Fan Baokang，Hu Yaan.Study on dynamic characteristics for delivery gate of lock of the Three-Gorge project［J］.Engineering Machanics，2009( Suppl1) : 185-188．
|
| [44] | U.S.Army Engineer Waterways Experiment Station.Lock Filling and Emptying Symmetrical System［R］.U.S．: ［s.n．］1981．
|
| [45] | Stockstill，Richak'd L，Neilson F M，et al.Hydraulic calculations for flow in lock manifolds［J］.Journal of Hydraulic Engineering， 1991，1 17( 8) : 1026-1041．
|
| [46] | Hammack E A，Stockstill R L.3D numerical modeling of John Day lock tainter valves［C］.ASCE: World Environmental and Water Resources Congress: Great Rivers，2009 : 2727-2736．
|
| [47] | Stockstill R L，Berger R C.A three-dimensional numerical model for flow in a lock filling system［C］.ASCE: World Environmental and Water Resources Congress: Great Rivers，2009: 2737-2746．
|
| [48] | N.M.德乌斯.通航船闸［M］.大连: 大连工学院出版社， 1988．
|
| [49] | DE UZ N M.Navigation Lock ［M］.Dalian: Dalian Institute Press，1988．
|
| [50] | 张瑞凯，宣国祥.带调节水池船闸水力计算数学模型［J］.水 利水运科学研究，1 995( 1) : 33-41．
|
| [51] | Zhang Ruikai，Xuan Guoxiang.Numerical model of hydraulic calculation for lock with regulation ponds［J］.Hydro-Science and Engineering， 1995( 1) : 33-41．
|
| [52] | 杨朝东.船闸复杂输水系统输水数学模型及应用研究［D］.南 京: 南京水利科学研究院， 1997．
|
| [53] | Yang Chaodong.Study on Mathematic Model and Application of Complex Filling and Emptying System for Navigation Lock ［D］． Nanjing: Nanjing Hydraulic Research lnstitute，1997．
|
| [54] | 郑宝友，李金合.船闸输水系统水力计算程序［J］.水道港口， 1986 ( 4) : 17-24．
|
| [55] | Zheng Baoyou，Li Jinhe.Hydraulic calculation program［J］.Journal of Waterway and Harbor，1986 ( 4) : 17-24．
|
| [56] | 宣国祥，张瑞凯，宗慕伟.单级船闸输水系统分析及水力计算 软件包［J］.水利水运科学研究，1 994( 1 /2) : 61-69．
|
| [57] | Xuan Guoxiang，Zhang Ruikai，Zong Muwei.A hydraulic analysis and calculation software for single lift lock filling and emptying system ［J］.Hydro-Science and Engineering，1994( 1 /2) : 61-69．
|
| [58] | 王玲玲，戴会超，王琼.三峡船闸水力学数值实验室的研制及应 用［J］.河海大学学报: 自然科学版， 2004，32( 1) : 100-103．
|
| [59] | Ma Zheng，Zhang Jiguang，Chen Hongxun，et al.Hydrodynamic study on water-filling tunnel of the Three Gorges Lock［J］.Journal of Hydrodynamics: A series，2007，22( 2) : 175-181．
|
| [60] | ［32］ 张利鹏.高水头船闸水流三维数值模拟研究［D］.重庆: 重庆 交通大学， 2008．
|
| [61] | Zhang Lipeng.The 3D Flow Numerical Simulation Study on Highlift Lock ［D］.Chongqing: Chongqing Jiaotong University，2008．
|
| [62] | ［33］ 杨忠超，杨斌，陈明栋，等.高水头船闸阀门开启过程水力特性 仿真研究［J］.重庆交通大学学报: 自然科学版， 2009，28( 4) : 758-762．
|
| [63] | Yang Zhongchao，Yang Bin，Chen Mingdong，et al.Simulation study on hydraulics characteristic of high head lock during valve opening process based on dynamic mesh technology［J］.Journal of Chongqing Jiaotong University: Natural Science，2009，28 ( 4 ) : 758-762．
|
| [64] | ［36］ 连恒铎.倒口出流消能技术在船闸集中输水系统设计中的应用 ［J］.水运工程，1 996( 4) : 15-18．
|
| [65] | Lian Hengduo.The stilling technique of inverted outlet flow in design of concentrated filling and emptying system of shiplock［J］． Port ＆ Waterway Engineering，1996( 4) : 15-18．
|
| [66] | ［37］ 刘本芹，宗慕伟，宣国祥.可不设镇静段的船闸集中输水系统研 究［J］.水运工程， 2008 ( 11) : 139 -143．
|
| [67] | Liu Benqin，Zong Muwei，Xuan Guoxiang.Study on lock’s concentrated filling ＆ emptying system with no need of mitigative segment ［J］.Port ＆ Waterway Engineering，2008 ( 11) : 139-143．
|
| [68] | ［38］ 胡亚安，张瑞凯.三峡船闸底扩与顶扩体型水力特性综合研究 ［J］.水科学进展， 1998，9 ( 2) : 164 -169．
|
| [69] | Hu Yaan，Zhang Ruikai.Synthetic research on hydraulic characteristics of culvert shapes behind valve for Three Gorges shiplock［J］． Advances in Water Science，1998，9 ( 2) : 164-169．
|
| [70] | ［42］ Stockstill R L.Mooring model coefficients for barge tows in a navigation lock［J］.Journal of Waterway Port，Coastal and Ocean Engineering， 2003，129( 5) : 233-236．
|
