［1］ European Commission.Road Transport Policy［R］.Brussels:Commission of the European Communities,2006:2-3.
[2]
［2］ Leucht P M.The directional dynamics of the commercial tractor-semitrailer vehicle during braking［J］.TRB of the national academies,1970,71(3):242-254.
[3]
［3］ Macadam C C.Application of an optimal preview control for simulation of closed-loop automobile driving［J］.IEEE Transactions on Systems,Man and Cybernetics,1981,11(6):393-399 .
[4]
［4］ Peng H.Optimal Preview Control for Vehicle Lateral Guidance［R］.California,U.S.:Institute of Transportation Studies University of California at Berkeley,1991.
［6］ Dunn A L,Heydinger G,Rizzoni G,et al.In-depth analysis of the influence of high torque brakes on the jackknife stability of heavy trucks［J］.Society of Automotive Engineers,2003,112(2):255-272 .
Niu Jianfeng,Wang Junhua,Dong Xianyuan.Research on the angle to truck escape ramps of mountain roads［J］.Journal of Chongqing Jiaotong University:Natural Sience,2010,29(4):604-608.
[9]
［11］王增权,赵希望.论汽车列车的合理匹配 ［J］.商用汽车,2010（3）:82-84.
[10]
Wang Zengquan,Zhao Xiwang.A thought and consideration over reasonable and ideal connection of tractor and trailer［J］.Commercial Vehicles,2010(3):82-84.
[11]
［12］70/311/EEC On the Approximation of the Laws of the Member States Relating to the Steering Equipment for Motor Vehicles and Their Trailers［S］.［S.l.］:EEC Commission,1999.
[12]
［13］何光里.汽车运用工程师手册［M］.北京:人民交通出版社,1997:112-113.
[13]
He Guangli.Automobile Application Engineer’s Handbook［M］.Beijing:China Communications Press,1997:112-113.
GB 12540—2009 Minimum Turning Circle Diameter,Minimum Turning Clearance Circle Diameter and Out Value Test Method for Motor Vehicles［S］.Beijing:China Standards Press,2009.
Zhang Hongwei,Wang Wei.Freight vehicle safety research and application［J］.Logistics Technology and Application:Freight Vehicles,2009(5):44-47.
[22]
［15］罗茂堂.浅议甩挂运输行业的科学发展［J］.科技创新导报,2008(32):216-217.
[23]
Luo Maotang.Discussion on the scientific development of hang dump the transportation industry［J］.Science and Technology Innovation Herald,2008(32):216-217.
