Gu Ji-you(顾继友). Adhesives and Coatings(胶粘剂与涂料)[M]. Beijing(北京): China Forestry Publishing House(中国林业出版社), 1999.
[2]
Kim S, Kim H J, Kim H S, et al. Thermal analysis study of viscoelastic properties and activation energy of melamine-modified urea-formaldehyde resins[J]. J Adhes Sci Technol, 2006, 20(8) : 803－816.
[3]
Fan D B, Li J Z, Mao A. Curing characteristics of low molar ratio urea-formaldehyde resins[J]. Journal of Adhesion and Interface, 2006, 7(4): 45－52.
[4]
Ma Hong-xia(马红霞), Yu Wen-ji(于文吉). Effect of mixing ratio of cotton-stalk /poplar on UF resin curing process(棉杆/杨木的混合比例对UF 树脂固化的影响)[J]. China Wood Industry(木材工业), 2006, 20(6): 11－13.
[5]
Du Guan-ben(杜官本), Lei Hong(雷洪), Pizzi A. Curing reaction of urea-formaldehyde resin by thermal mechanical analysis(脲醛树脂固化过程的热机械性能分析)[J]. Journal of Beijing Bores try University(北京林业大学学报), 2009, 31(3): 106－110.
[6]
Gu Ji-you(顾继友), Zhu Li-bin(朱丽滨), Ono Hirokuni(小野拡邦). Study on curing mechanism of low formaldehyde emission Urea-Formaldehyde resins(低甲醛释放脲醛树脂固化反应历程的研究)[J]. Chemistry and Industry of Forest Products(林业化学与工业), 2005, 25(4): 11－16.
[7]
Wang Shu-min(王淑敏), Shi Jun-you(时君友). Study on curing characteristics of low-toxicity urea-formaldehyde resin(采用DSC 对低毒脉醛树脂固化特性的研究)[J]. China Forest Products Industry(林产工业), 2012, 39(5): 27－31.
[8]
Song Gong-pu(宋公仆), Fan Wei(范伟), Zhang Jia-wei(张嘉伟), et al. A method for correcting of the effects of stimulated echo in NMR logging(核磁共振测井受激回波校正方法研究)[J]. Chinese J Magn Reson(波谱学杂志), 2013, 30(1): 103－112.
[9]
Sun Xue-wei(孙学伟), Li Zhi-gang(李志刚), Ni Guang-cai(倪广才), et al. Spectral studies and structural elucidation of aspoxicillin(阿扑西林结构确证的谱学研究)[J]. Chinese J Magn Reson(波谱学杂志), 2012, 29(4): 584－589.
[10]
Ma Da-yan(马大燕), Wang Xi-ming(王喜明), Zhang Ming-hui(张明辉). Mechanism of water sorption during adsorption process of wood studied by NMR(核磁共振研究木材吸着过程中水分吸附机理)[J]. Chinese J Magn Reson(波谱学杂志), 2011, 28(1): 135－141.
