［5］ ASTM E511-07 Standard test method for measuring heat flux using a copper-constantan circular foil, heat-flux transducer ［S］.
[5]
［6］ Lee H J, Seung I S, Lee B J, et al. Heat flux measurement techniques over the protuberance at the hyper-sonic flow of Mach 7 ［C］∥16th AIAA/DLR/DGLR International Space Planes and Hypersonic Systems and Technologies Conference.Bremen, Germany: AIAA, 2009: 19-22.
[6]
［7］ Chadwick K M. Stagnation heat transfer measurement techniques in hypersonic shock tunnel flows over spherical segments ［R］. Buffalo, New York: AIAA, 1997.
[7]
［8］ Lewis D R, Norris J D. Techniques for thin-skin heat-transfer measurements for surface roughness at AEDC tunnel 9 ［C］∥26th AIAA Aerodynamic Measurement Technology and Ground Testing Conference. Seattle, Washington: AIAA, 2008: 23-26.
[8]
［9］ ASTM E422-99 Standard test method for mea- suring heat flux using a water-cooled calorimeter ［S］. US: ASTM International, 1999.
[9]
［10］ Kidd C T, Adams J J C. Fast-response heat-flux sensor for mea-surement commonality in hypersonic wind tunnels ［J］. Journal of Spacecraft and Rockets, 2001, 38(5): 719-729.
[10]
［11］ Raphael-Mabel S. Design and calibration of a novel high temperature heat flux sensor ［D］. Virginia: Virginia Polytechnic Institute and State University, 2005.
[11]
［12］ Roediger T, Knauss H, Estorf M, et al. Hypersonic instability waves measured using fast-response heat-flux gauges ［J］. Journal of Spacecraft and Rockets, 2009, 46(2): 266-273.
［16］ Hubble D O, Diller T E. A hybrid method for measuring heat flux［J］. Journal of Heat Transfer, 2010, 132(3)：031602.
[15]
［1］ 刘初平. 气动热与热防护试验热流测量［M］. 北京：国防工业出版社，2013.
[16]
［13］ Liebert C H, Kolodziej P. Dual active surface heat flux gage probe ［C］∥41st International Instrumentation Symposium. Denver, Colorado: Instrument Society of America, 1995:7-11.
