| [1] | ［1］ Ivantysyn J， Ivantysynova M．Hydrostatic pumps and motors，principles，designs，performance，modelling，analysis，control and testing［M］．New Delhi:Academia Books International, 2000．
|
| [2] | ［2］ 徐绳武. 柱塞式液压泵［M］.北京:机械工业出版社， 1985．
|
| [3] | ［5］ Edge K A，Darling J．The pumping dynamics of swash plate piston pumps［J］．Transactions ASME Journal of Dynamic Systems， Measurement and Control，1989， 111(2):307-312．
|
| [4] | ［6］ Manring N D．The discharge flow ripple of an axial-piston swash-plate type hydrostatic pump［J］．Journal of Dynamic Systems，Measurement， and Control，2000， 122(2):263-268．
|
| [5] | ［7］ Pelosi M, Ivantysynova M． Heat transfer and thermal elastic deformation analysis on the piston/cylinder interface of axial piston machines［J］．Journal of Tribology-Transactions of the ASME，2012，134(4):1-15．
|
| [6] | ［8］ 张也影．流体力学［M］．第2版. 北京：高等教育出版社，1999．
|
| [7] | ［9］ 赵春花．液压与气压传动［M］．北京：中国电力出版社，2011．
|
| [8] | ［10］ LMS Imagine Lab. HYD advanced fluid properties, technical bulletin No.117［M］. Leuven, BEL:LMS Imagine Lab, 2007．
|
| [9] | ［11］ Gholizadeh H，Burton R，Schoenau G．Fluid bulk modulus：comparison of low pressure models［J］．International Journal of Fluid Power, 2012, 13(1):7-16．
|
| [10] | ［12］ Casoli P, Vacca A, Franzoni G, et al. Modeling of fluid properties in hydraulic positive displacement machines［J］. Simulation Modeling Practice and Theory, 2006, 14(8):1059-1072．
|
| [11] | ［13］ Nykanen T H A, Esque S, Ellman A U. Comparison of different fluid models［C］∥Bath Workshop on Power Transmission and Motion Control. Bath，UK:the University of Bath，2000．
|
| [12] | ［14］ Kim S，Murrenhoff H．Measurement of effective bulk modulus for hydraulic oil at low pressure［J］. Journal of Fluids Engineering, 2012, 134(2):021201．
|
| [13] | ［15］ Schnerr GH，Sauer J．Physical and numerical modeling of unsteady cavitation dynamics［C］∥4th International Conference on Multiphase Flow. New Orleans，US:ICMF， 2001．
|
| [14] | ［16］ Singhal A K， Athavale M M，Li H Y，et al．Mathematical basis and validation of the full cavitation model［J］. Journal of Fluids Engineering, 2002, 124(3):617-624．
|
| [15] | ［17］ Zwart P J，Gerber A G，Belamri T．A two-phase flow model for predicting cavitation dynamics［C］∥Proceedings of the Fifth International Conference on Multiphase Flow. Yokohama，Japan:ICMF，2004．
|
| [16] | ［18］ Zhou J，Vacca A，Manhartsgruber B．A novel approach for the prediction of dynamic features of air release and absorption in hydraulic oils［J］. Journal of Fluids Engineering, 2013, 135(9):091305.
|
| [17] | ［3］ 马吉恩，徐兵，杨华勇．轴向柱塞泵流动特性理论建模与试验分析［J］．农业机械学报，2010，41(1)：188-194．
|
| [18] | ［4］ Wieczorek U，Ivantysynov M．Computer aided optimization of bearing and sealing gaps in hydrostatic machines-the simulation tool CASPAR［J］. International Journal of Fluid Power, 2002, 3(1):7-20.
|
