FUJIWARA S.High Efficiency Oil Pump Rotor With New Tooth Profile[J].SAE Paper 2004-01-0498.
[3]
ZHOU Q.Engine Lubrication System Analysis and Oil Pump Design Optimization[C]//Tsinghua University Press.Advanced Tribology:Proceedings of CIST 2008 & ITS-IFTOMM.Beijing:Tsinghua University Press,2008:56-60.
[4]
KIM J H,KIM C,CHANG Y J.Optimum Design on Lobe Shapes of Gerotor Oil Pump[J].Journal of Mechanical Science and Technology,2006,20(9):1390-1398.
GONG Jin-ke,CAI Hao,LIU Yun-qing,et al.CFD Analysis and Experimental Research on the Internal Flow Field in Rotor Oil Pump[J].Journal of Hunan University:Natural Sciences,2007,34(5):24-28.
[7]
HAWORTH D C,MAGUIRE J M,MATTHES W R,et al.Dynamic Fluid Flow Analysis of Oil Pumps[J].SAE Paper 960422.
[8]
ZHANG D F,PERNG C Y,LAVERTY M.Gerotor Oil Pump Performance and Flow/Pressure Ripple Study[J].SAE Paper 2006-01-0359.
[9]
POLAT O,EBRINC A A.Oil Pump Drive Design on a Diesel Engine[J].SAE Paper 2009-01-0563.
[10]
TONG Bao-hong,GUI Chang-lin,CHEN Hua,et al.Neural Network Modeling for Oil Delivery Performance of Oil Pump in Engines[J].Transactions of CSICE,2007,25(3):265-270.
YANG Yuan-mo,XIE Yong-que.Two New Methods for Solving the Trapped Oil Phenomenon in Outer-engaged Gear Pump[J].Chinese Hydraulic & Pneumatic,2006(8):75-78.
LIU Yu-ting,ZHU Gui-xiang.Improvement Designing for Increasing Flow Rate of a Rotor Oil Pump[J].Design & Manufacture of Diesel Engine,2008,15(3):24-27.
[16]
YANG Guo-lai,LIU Zhi-gang,YANG Chang-an,et al.Effect of Internal Gear Pump Modification Coefficient on Flow Pulsation[J].Machine Tool & Hydraulics,2008,36(11):60-61,108.
[17]
马富银,杨国平,吴伟蔚.泵的空化现象研究进展[J].流体机械,2011,39(4):30-34.
[18]
屈盛官,孙自树.外啮合直齿轮机油泵容积效率的研究[J].车用发动机,2001(4):18-21.
[19]
AVVA R K,SINGHAL A K,GIBSON D H.An Enthalpy Based Model of Cavitation[C]//ASME.Proceedings of the ASME/JSME Fluids Engineering Conference 1995:Bio-medical Fluid Engineering. New York:ASME,1995:63-70.
[20]
陈 英.外啮合齿轮泵的间隙优化及振动和噪声的研究[D].长春:吉林大学,2004.
[21]
CHEN Ying.The Most Optimization Gap of the External Gear and the Research of Vibration and Noise [D].Changchun:Jilin University,2004.
YANG Yuan-mo,HU Bing,ZENG Ming-song,et al.Cause and Solution for Noise and Vibration of External Gear Rotary Pump[J].Machine Tool & Hydraulics,2007,35(12):114-116.
SUN Yue-hai,ZHANG Ce,PAN Feng-zhang,et al.Dynamical Model of a Spur Gear Transmission System Vibration [J].Chinese Journal of Mechanical Engineering,2000,36(8):47-50,54.
[28]
LI Run-fang,HAN Xi,LIN Teng-jiao,et al.Theoretic Analysis and Experimental Research for Coupled Vibration of Gear System [J].Chinese Journal of Mechanical Engineering,2000,36(6):79-81.
[29]
WANG J J,LI R F,PENG X H.Survey of Nonlinear Vibration of Gear Transmission Systems[J].Applied Mechanical Review,2003,56(3):309-329.
FANG Zong-de,GAO Ping,GAO Xiang-qun.Analysis of Vibration in Straight Bevel Gearing[J].Chinese Journal of Mechanical Engineering,1994,30(3):65-70.
[32]
JIANG Qing-lei,WU Da-zhuan,TAN Shan-guang,et al.Development and Application of a Model for coupling Geared Rotors System [J].Journal of Vibration Engineering,2010,23(3):254-259.
SAEGUSA Y,URASHIMA K,SUGIMOTO M,et al.Development of Oil-pump Rotors with a Trochoidal Tooth Shape[J].SAE Paper 840454.
[36]
CHANG Y J,KIM J H,JEON C H,et al.Development of an Integrated System for the Automated Design of a Gerotor Oil Pump[J].Journal of Mechanical Design,2007,129(10):1099-1105.
[37]
SINGHAL A K,ATHAVALE M M,LI H Y,et al.Mathematical Basis and Validation of the Full Cavitation Model[J].Journal of Fluids Engineering,2002,124(3):617-624.
[38]
DOIDGE J R,FROSLIE L E,GUTERMAN J W,et al.Transmission Oil Pumps[J].SAE Paper 610205.
[39]
STALEY D,PRYOR B,GILGENBACH K.Adaptation of a Variable Displacement Vane Pump to Engine Lube Oil Applications[J].SAE Paper 2007-01-1567.
RUAN Zhen,HU De-jin,XU Li-ming,et al.Analysis and Research on Mathematical Model of Oil Pump's Operating Characteristic[J].Chinese Internal Combustion Engine Engineering,2006,27(3):50-53,57.
[45]
李宏伟,张方晓.内啮合齿轮泵的排量分析[J].液压与气动,2007(2):67-69.
[46]
LI Hong-wei,ZHANG Fang-xiao.Displacement Research of Internal Gear Pumps[J].Chinese Hydraulic & Pneumatic,2007(2):67-69.
[47]
ZHANG Huai-zhou.Analyse on the Delivery Quality of External Gear Pump[J].Journal of Chongqing Polytechnic College,2002,17(1):19-22.
QU Sheng-guan,SUN Zi-shu.The Development of the Rotor Oil Pump Volume Efficiency[J].Journal of Huazhong University of Science & Technology,2001,29(1):36-38.
[52]
QU Sheng-guan,SUN Zi-shu.A Study on Volumetric Efficiency of External Gearing Cylindrical Gear Pump [J].Vehicle Engine,2001(4):18-21.
YANG Yuan-mo,HUANG Chun-ying,WAN Man-hua.Design on Improving the Volume Efficiency of Internal Meshing Arc-cycloid Gear Pump[J].Hydraulic & Pneumatic,2005(2):13-15.
[55]
KUBOTA A,KATO H,YAMAGUCHI H.A New Modeling of Cavitating Flows:a Numerical Study of Unsteady Cavitation on a Hydrofoil Section [J].Journal of Fluid Mechanics,1992,240:59-96.
[56]
苏 春.液压系统中噪声的控制[J].液压与气动,2001(2):39-40.
[57]
SU Chun.Noise Control for Hydraulic System[J].Hydraulic & Pneumatic,2001(2):39-40.
[58]
LIU Xi-liang,CHEN Xiao-hu.Study on Fault Diagnosis Based on Feature Fusion of Vibration Signal for Gear Pump[J].Machine Tool & Hydraulics,2009,37(5):193-195.
[59]
KIRACOFE D R,PARKER R G.Structured Vibration Modes of General Compound Planetary Gear Systems[J].Journal of Vibration and Acoustics,2007,129(1):1-16.
[60]
PENNACCHI P,VANIA A,FRATTAROLI F.Torsional Vibrations Caused by Geared Coupling in a Shaft Train Driven by a Steam Turbine[J].Journal of Engineering for Gas Turbines and Power,2011,133(1):12501-12508.
WANG San-min,SHEN Yun-wen,DONG Hai-jun.Nonlinear Dynamical Characteristics of a Spiral Bevel Gear System with Backlash and Time-varying Stiffness [J].Chinese Journal of Mechanical Engineering,2003,39(2):28-32.
YANG Wan-an,XU Ming.A Study on Reduction of Gear Vibration and Noise [J].Journal of Vibration and Shock,1995,14(3):49-56.
[66]
LI Kai-ling,SUN Nai-kun,CUI Jian-ping,et al.Influence on Gear Mesh Noise from Different Tooth Profile Errors of Involute Gears [J].Chinese Journal of Mechanical Engineering,2008,44(3):234-240.
