全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

部分内填混凝土钢桁梁焊接整体节点试验

, PP. 117-123

Keywords: 桥梁工程,钢桁梁,试验研究,整体节点,节点刚度,极限承载力,破坏模态

Full-Text   Cite this paper   Add to My Lib

Abstract:

?为明确部分内填混凝土设计方案在焊接整体钢桁梁结构中的适用性,设计了2组不同混凝土填充范围的T形焊接整体节点试件,对其在水平和竖向荷载下的静力性能进行试验研究,分析了弦杆内填混凝土长度对节点刚度、应力应变分布、极限承载力、破坏模态等性能指标的影响。结果表明:与空心节点相比,弦杆内部分或完全填充混凝土之后,节点的弦杆翼板压屈破坏得到有效避免,钢板应力水平出现较明显降低,且节点的弹性刚度、屈服强度和极限强度显著提高;而部分填充混凝土方案与完全填充混凝土方案的节点力学性能则区别甚微。

References

[1]  孙昌茂.孙口黄河大桥钢梁整体节点的焊接技术[J].桥梁建设,1999(2):44-45,48.
[2]  SUN Chang-mao.The Welding Technique of Steel Beam Monolithic Gusset for Sunkou Yellow River Bridge[J].Bridge Construction,1999(2):44-45,48.
[3]  郭兆祺,李军平,王岁利,等.芜湖长江大桥钢梁整体节点的制造[J].钢结构,2001,16(51):31-33,51.
[4]  方 志.上海闵浦二桥钢桁梁节点的应力分析[J].交通科技,2009(4):4-6.
[5]  FANG Zhi.Stress Analysis of Steel Trussed Girder Nodes of Shanghai Minpu 2nd Bridge[J].Transportation Science & Technology,2009(4):4-6.
[6]  程 斌,吴斌暄,庄冬利,等.大跨度中承式钢桁架拱桥初步设计的体系优化[J].公路工程,2007,32(6):110-114.
[7]  CHENG Bin,WU Bin-xuan,ZHUANG Dong-li,et al.System Optimization of Long-span Half-through Steel Truss Arch Bridge in Preliminary Design Stage[J].Highway Engineering,2007,32(6):110-114.
[8]  YE Zhuo-qi,YANG Jian,LIU Yong-jian,et al.Research on Partially Concrete-filled Steel Tubular Bridges[J].Journal of Architecture and Civil Engineering,2010,27(2):96-101.
[9]  杨根杰.部分填充混凝土钢箱桁拱桥受力性能及设计方法研究[D].西安:长安大学,2010.
[10]  黄永辉,王荣辉,甘 泉.钢桁梁桥整体节点焊接残余应力试验[J].中国公路学报,2011,24(1):83-88.
[11]  HUANG Yong-hui,WANG Rong-hui,GAN Quan.Experiment on Welding Residual Stress of Integral Joint for Steel Truss Bridge[J].China Journal of Highway and Transport,2011,24(1):83-88.
[12]  王天亮.钢桁梁整体节点试验研究[J].桥梁建设,1999(4):32-40.
[13]  WANG Tian-liang.Test Study of Integral Panel Points of Steel Truss Girder[J].Bridge Construction,1999(4):32-40.
[14]  王天亮,王邦楣,潘东发.芜湖长江大桥钢梁整体节点疲劳试验研究[J].中国铁道科学,2001,22(5):93-97.
[15]  LIU Gao,WU Wen-ming,TANG Liang,et al.Fatigue Test on Integral Joint of the Main Truss of the Baling River Bridge[J].China Civil Engineering Journal,2009,42(12):142-148.
[16]  PACKER J A.Concrete-filled HSS Connections[J].Journal of Structural Engineering,1995,121(3):458-467.
[17]  刘永健.矩形钢管混凝土桁架节点极限承载力试验与设计方法研究[D].长沙:湖南大学,2003.
[18]  LIU Yong-jian.Experiments on Ultimate Bearing Capacity and Research on Design Method of Joints of Concrete-filled Rectangular Steel Tube Truss[D].Changsha:Hunan University,2003.
[19]  GUO Zhao-qi,LI Jun-ping,WANG Sui-li,et al.The Fabrication of Steel Girders with Integral Joints for Wuhu Yangtze River Bridge[J].Steel Construction,2001,16(51):31-33,51.
[20]  陈 玉,陈 勇.焊接整体节点技术在铁路钢桥上的应用[J].山西建筑,2005,31(19):114-115.
[21]  CHEN Yu,CHEN Yong.Application of Welding Integral Node in Steel Bridge of Railway[J].Shanxi Architecture,2005,31(19):114-115.
[22]  USAMI T,GE H B,SAIZUKA K.Behaviour of Partially Concrete-filled Steel Bridge Piers Under Cyclic and Dynamic Loading[J].Journal of Constructional Steel Research,1997,41(2/3):121-136.
[23]  叶卓棋,杨 健,刘永健,等.部分填充混凝土钢管结构桥梁研究[J].建筑科学与工程学报,2010,27(2):96-101.
[24]  YANG Gen-jie.Research on Mechanical Behavior and Design Method of Rectangular Steel Tube Truss Arch Bridges with Chord Concrete-inside[D].Xi'an:Chang'an University,2010.
[25]  WANG Tian-liang,WANG Bang-mei,PAN Dong-fa.Steel Beam Integral Node Fatigue Test of Wuhu Yangtze River Bridge[J].China Railway Science,2001,22(5):93-97.
[26]  刘 高,吴文明,唐 亮,等.坝陵河大桥钢桁加劲梁主桁架整体节点疲劳试验[J].土木工程学报,2009,42(12):142-148.
[27]  狄 谨,周绪红,刘永健.矩形钢管混凝土桁架节点极限承载力研究[J].中国公路学报,2004,17(3):62-67.
[28]  DI Jin,ZHOU Xu-hong,LIU Yong-jian.Research on the Ultimate Bearing Capacity of Joint in the Concrete Filled Rectangular Steel Tube Truss[J].China Journal of Highway and Transport,2004,17(3):62-67.
[29]  ZHENG Wen-zhong,ZHANG Ge-ming,LIU Xu-dong,et al.Experimental Research on Ultimate Bearing Capacity of N-joints of Grouted Square Steel Tube Trusses[J].Journal of Southeast University:English Edition,2007,23(4):566-570.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133