全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

基于车-桥耦合振动理论的移动荷载识别

, PP. 74-86

Keywords: 桥梁工程,多梁式桥梁,有限元模型修正,移动荷载识别,低通滤波,横向位置

Full-Text   Cite this paper   Add to My Lib

Abstract:

?提出了基于有限元模型修正的单车通过多梁式桥梁的移动荷载识别方法。首先采用Butterworth低通滤波器对现场采集到的24h内所有过桥车辆产生的桥梁动位移信号进行滤波处理,提取静力响应极值,并严格按照车型进行分类统计;其次,对观测桥梁进行基于静力试验的有限元模型修正,建立能够反映桥梁真实状态的基准有限元模型;最后将修正后的有限元模型输入至自行研发的BDANS软件中的多梁式车-桥耦合振动模块,以车型为单位,依据该车型车辆在桥面横向移动时各主梁竖向位移响应分配关系,结合多梁式车-桥耦合振动模块以及实测车辆过桥时各主梁静力极值响应,识别出车辆在桥面行驶的横向位置,然后根据识别出的车辆横向行驶位置和实测桥梁响应识别出车质量。结果表明:该识别方法较为可靠,识别精度较高,能按照车型批量进行识别,可大规模处理交通荷载数据。

References

[1]  NOWAK A S.Live Load Model for Highway Bridges[J].Structural Safety,1993,13(1/2):53-66.
[2]  MIAO T J,CHAN T H T.Bridge Live Load Models from WIM Data[J].Engineering Structures,2002,24(8):1071-1084.
[3]  李扬海,鲍卫刚,郭修武,等.公路桥梁结构可靠度与概率极限状态设计[M].北京:人民交通出版社,1997.
[4]  LI Yang-hai,BAO Wei-gang,GUO Xiu-wu,et al.Structural Reliability for Highway Bridges and Probability-based Limit State Design[M].Beijing:China Communications Press,1997.
[5]  CONNOR C O,CHAN T H T.Dynamic Wheel Loads From Bridge Strains[J].Journal of Structural Engineering,1988,114(8):1703-1723.
[6]  CHAN T H T,LAW S S,YUNG T H,et al.An Interpretive Method for Moving Force Identification [J].Journal of Sound and Vibration,1999,219(3):503-524.
[7]  LAW S S,CHAN T H T,ZENG Q H.Moving Force Identification: A Time Domain Method[J].Journal of Sound and Vibration,1997,201(1):1-22.
[8]  LAW S S,CHAN T H T,ZENG Q H.Moving Force Identification:A Frequency and Time Domains Analysis [J].Journal of Dynamic Systems,Measurement and Control,1999,121(3):394-401.
[9]  LAW S S,BU J Q,ZHU X Q,et al.Vehicle Axle Loads Identification Using Finite Element Method[J].Engineering Structures,2004,26(8):1143-1153.
[10]  陈 锋,袁向荣,李 明.移动荷载识别的B-样条函数逼近法[J].石家庄铁道学院学报,2003,16(1):11-14.
[11]  CHEN Feng,YUAN Xiang-rong,LI Ming.B-spline Function Approaching Method in Moving Force Identification[J].Journal of Shijiazhuang Railway Insititute,2003,16(1):11-14.
[12]  中国汽车工业总公司和中国汽车技术研究中心.中国汽车车型手册[M].济南:山东科学技术出版社,1993.
[13]  Chinese Automotive Industry Motor Head Office and Chinese Automotive Engineering Research Center.Chinese Vehicle Type Manual[M].Jinan:Scientific and Technical Press of Shandong,1993.
[14]  中国工业与信息化部.车辆生产企业及产品公告[EB/OL].(2009-07-07)[2012-01-23].http://www.miit.gov.cn/.
[15]  Chinese Industry and Information Ministry.Automotive Production Enterprise and Product Bulletin[EB/OL].(2009-07-07)[2012-01-.http://www.miit.gov.cn/.
[16]  乔 磊.基于有限元模型修正的多梁式桥梁移动荷载识别[D].西安:长安大学,2010.
[17]  QIAO Lei.Moving Force Identification of Multi-girder Bridge Based on Finite Element Model Updating [D].Xi'an:Chang'an University,2010.
[18]  ASHEBOA B,CHAN T H T,YU L.Evaluation of Dynamic Loads on a Skew Box Girder Continuous Bridge Part I: Field Test and Modal Analysis[J].Engineering Structures,2007,29(6):1052-1063.
[19]  李钟慎.基于MATLAB设计巴特沃斯低通滤波器[J].信息技术,2003,27(3):49-52.
[20]  LI Zhong-shen.The Design of Butterworth Lowpass Filter Based on MATLAB[J].Information Technology,2003,27(3):49-52.
[21]  韩万水,王 涛,李永庆,等.基于模型修正梁格法的车桥耦合振动分析系统[J].中国公路学报,2011,24(5):47-55.
[22]  HAN Wan-shui,WANG Tao,LI Yong-qing,et al.Analysis System of Vehicle-bridge Coupling Vibration with Grillage Method Based on Model Updating[J].China Journal of Highway and Transport,2011,24(5):47-55.
[23]  院素静.公路车-桥耦合典型车辆运动方程的建立及软件设计[D].西安:长安大学,2012.
[24]  YUAN Su-jing.Development and Programing of Typical Vehicle Equation of Motion for Coupling Vibration Between Highway Bridge and Vehicles[D].Xi'an:Chang'an University,2012.
[25]  韩万水,马 麟,徐志刚.BDANS 软件介绍及动态可视化功能实现[R].西安:长安大学,2010.
[26]  HAN Wan-shui,MA Lin,XU Zhi-gang.Recommendation of BDANS Software and Dynamic Visualization Realization[R].Xi'an:Chang'an University,2010.
[27]  王 涛.高速公路桥梁交通荷载调查分析及仿真模拟[D].西安:长安大学,2010.
[28]  WANG Tao.Investigation Statistics and Simulation for Random Traffic Loading of Expressway Bridge [D].Xi'an:Chang'an University,2010.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133