Lim S F, Khambadkone A M.A simple digital DCM control scheme for boost PFC operating in both CCM and DCM[J].IEEE Trans. on Industrial Application, 2011, 47(4):1802-1812.
[2]
Lai J S, Chen D.Design consideration for power factor correction boost converter operating at the boundary of continuous conduction mode and discontinuous conduction mode[C]//Proceedings of IEEE Conference on Applied Power Electronics Conference and Exposition.San Diego:IEEE, 1993:267-273.
[3]
姚凯, 阮新波, 冒小晶, 等.电流断续模式Boost功率因数校正变换器的变占空比控制[J].电工技术学报, 2011, 26(11):14-24.Yao Kai, Ruan Xinbo, Mao Xiaojing, et al.DCM boost PFC converter with variable duty cycle control[J].Transactions of China Electrotechnical Society, 2011, 26(11):14-24(in Chinese).
[4]
Crebier J C, Brunello M, Ferrieux J P.A new method for EMI study in boost derived PFC rectifiers[C]//Proceedings of IEEE Conference on Power Electronics Specialists Conference.Charleston:IEEE, 1999:855-860.
[5]
Rossetto L, Buso S, Spiazzi G.Conducted EMI issue in a 600-W single-phase boost PFC design[J].IEEE Trans. on Industrial Application, 2000, 36(2):578-585.
[6]
Zumel P, Garcia O, Cobos J A, et al.EMI reduction by interleaving of power converters[C]//Proceedings of IEEE Conference on Applied Power Electronics Conference and Exposition.Anaheim:IEEE, 2004:688-694.
[7]
和军平, 陈为, 姜建国.功率因数校正电路杂散磁场对传导干扰发射作用的分析研究[J].中国电机工程学报, 2005, 25(14):151-157.He Juping, Chen Wei, Jiang Jianguo.Analysis on the EMI effect of stray magnetic field from main circuit of a PFC switched mode power supply[J].Proceedings of the CSEE, 2005, 25(14):151-157(in Chinese).
[8]
Wang C Y, Xu M, Lee F C, et al.EMI study for the interleaved multi-channel PFC[C]//Proceedings of IEEE Conference on Power Electronics Specialists Conference.Orlando:IEEE, 2007:1336-1342.
[9]
Kong P J, Wang S, Wang C Y, et al.Common mode EMI study and reduction technique in interleaved multi-channel PFC[C]//Proceedings of IEEE Conference on Applied Power Electronics Conference and Exposition.Austin:IEEE, 2008:729-735.
[10]
Yang L Y, Lu B, Dong W, et al.Modeling and characterization of a 1kW CCM PFC converter for conducted EMI prediction[C]//Proceedings of IEEE Conference on Applied Power Electronics Conference and Exposition.Anaheim:IEEE, 2004:763-769.
[11]
Wang Z J, Wang S, Kong P J, et al.DM EMI noise prediction for constant on-time, critical mode power factor correction converters[J].IEEE Trans. on Power Electronics, 2012, 27(7):3150-3157.
[12]
Ku C P, Chen D, Lin S H.A new control scheme for boost PFC converters for both CCM and DCM operations[C]// Proceedings of IEEE Conference on Energy Conversion Congress and Exposition.Phoenix:IEEE, 2011:1334-1338.
[13]
Wang S, Lee F C, Odendaal W G.Characterization, evaluation, and design of noise separator for conducted EMI noise diagnosis[J].IEEE Trans. on Power Electronics, 2005, 20(4):974-982.
[14]
赵阳, 董颖华, 陆婋泉, 等.EMI噪声分离网络在电力线噪声分析中的应用[J].中国电机工程学报, 2010, 30(36):114-120.Zhao Yang, Dong Yinghua, Lu Xiaoquan, et al.EMI noise discrimination network applied to power-line EMI noise analysis[J].Proceedings of the CSEE, 2010, 30(36):114-120(in Chinese).
[15]
European Committee for Electrotechnical Standardization.EN55022 Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment[S].European:European Norm Standard, 2006.
[16]
Meng J, Ma W M, Pan Q J, et al.Identification of essential coupling path models for conducted EMI prediction in switching power converters[J].IEEE Trans. on Power Electronics, 2006, 21(6):1795-1803.
[17]
Chen H L, Qian Z M.Modeling and characterization of parasitic inductive coupling effects on differential-mode EMI performance of a boost converter[J].IEEE Trans. on Electromagnetic Compatibility, 2011, 53(4):1072-1080.
[18]
IEC CISPR.CISPR16-1-2 Specification for radio disturbance and immunity measuring apparatus and methods-Part 1-2[S].British:British Standards, 2009.