Kaisare N S,Vlachos D G．A review on microcombustion：Fundamentals,devices and applications[J]．Progress in Energy and Combustion Science,2012,38(3)：321-359．
[2]
Ju Y G,Maruta K．Microscale combustion：Technology development and fundamental research[J]．Progress in Energy and Combustion Science,2011,37(6)：669-715．
[3]
杨卫娟,周俊虎,汪洋,等．微尺度燃烧中的温度及热回流分布[J]．中国电机工程学报,2010,30(20)：28-32．Yang Weijuan,Zhou Junhu,Wang Yang,et al．Temperature and Heat-recirculation Distribution in Micro-scale Combustion[J]．Proceedings of the CSEE,2010,30(20)：28-32(in Chinese)．
[4]
Zanger J,Widenhorn A,Aigner M．Experimental investigations of pressure losses on the performance of a micro gas turbine system[J]．Journal of Engineering for Gas Turbines and Power-Transactions of the Asme,2011,133(8)：437-448．
[5]
Mikami M,Maeda Y,Matsui K,et al．Combustion of gaseous and liquid fuels in meso-scale tubes with wire mesh[J]．Proceedings of the Combustion Institute,2013,34(2)：3387-3394．
[6]
郑成航,程乐鸣,李涛,等．多孔介质燃烧火焰面特性数值模拟[J]．中国电机工程学报,2009,29(5)：48-53．Zheng Chenghang,Cheng Leming,Li Tao,et al．Numerical simulation of combustion fronts in porous media[J]．Proceedings of the CSEE,2009,29(5)：48-53(in Chinese)．
[7]
冯耀勋,王勇,蒋利桥,等．多孔介质表面火焰最小稳燃空间实验研究[J]．中国电机工程学报,2011,31(20)：46-51．Feng Yaoxun,Wang Yong,Jiang Liqiao,et al．The smallest distance for stable combustion experimental study of flames on porous surface[J]．Proceedings of the CSEE,2011,31(20)：46-51(in Chinese)．
[8]
Jejurkar S Y,Mishra D P．Effects of combustor geometry on hydrogen-air premixed flame combustion in an annular microcombustor[J]．Proceedings of the Institution of Mechanical Engineers,Part G：Journal of Aerospace Engineering,2011,225(12)：1310-1321．
[9]
张永生,周俊虎,杨卫娟,等．T型微细管道内氢气空气预混燃烧实验研究[J]．中国电机工程学报,2005,25(21)：128-131．Zhang Yongsheng,Zhou Junhu,Yang Weijuan,et al．The experimental study of hydrogen and air premixed combustion in microscale T type tube[J]．Proceedings of the CSEE,2005,25(21)：128-131(in Chinese)．
[10]
Zhong B J,Wang J H．Experimental study on premixed CH4/air mixture combustion in micro Swiss-roll combustors[J]．Combustion and Flame,2010,157(12)：2222-2229．
[11]
Wan J,Fan A,Maruta K,et al．Experimental and numerical investigation on combustion characteristics of premixed hydrogen/air flame in a micro-combustor with a bluff body[J]．International Journal of Hydrogen Energy,2012,37(24)：19190-19197．
[12]
Pan J F,Huang J,Li D T,et al．Effects of major parameters on micro-combustion for thermophotovoltaic energy conversion[J]．Applied Thermal Engineering,2007,27(5-6)：1089-1095．
[13]
曹海亮,徐进良,张永立,等．微小尺度下氢气预混燃烧的实验研究[J]．力学学报,2006,38(3)：316-322．Cao Hailiang,Xu Jinliang,Zhang Yongli,et al．Experimental ivestigation of microscale premixed combustion of hydrogen[J]．Chinese Journal of Theoretical and Applied Mechanics,2006,38(3)：316-322(in Chinese)．
[14]
Chou S K,Yang W M,Chua K J,et al．Development of micro power generators - A review[J]．Applied Energy,2011,88(1)：1-16．
[15]
钟主海,刘磊,樊辉青,等．矩形和圆形微通道内流体流动特性的实验研究[J]．中国电机工程学报,2012,32(14)：76-81．Zhong Zhuhai,Liu Lei,Fan Huiqing,et al．Experimental study on flow characteristics in rectangular and circular microchannels[J]．Proceedings of the CSEE,2012,32(14)：76-81(in Chinese)．
[16]
翟明,董芃,王希影,等．圆管湍流脉动流动与换热的数值模拟[J]．中国电机工程学报,2009,29(20)：85-91．Zhai Ming,Dong Peng,Wang Xiying,et al．Numerical simulation of turbulent pulsating flow and heat transfer in tubes[J]．Proceedings of the CSEE,2009,29(20)：85-91(in Chinese)．
[17]
张力,邱赟,唐强,等．微型预混腔内流体传质影响因素的数值模拟[J]．中国电机工程学报,2007,27(11)：78-82．Zhang Li,Qiu Yun,Tang Qiang,et al．Numerical simulation research on the influence factors of mass transfer in micro-chamber[J]．Proceedings of the CSEE,2007,27(11)：78-82(in Chinese)．
[18]
Knuth E L,Toennies J P．Supercritical-state expansions which cross the binodal line before reaching the nozzle throat[C]//AIP Conference Proceedings,New York：American Institute of Physics,2012：1267-1273．
[19]
Thanh M D,Kröner D．Numerical treatment of nonconservative terms in resonant regime for fluid flows in a nozzle with variable cross-section[J]．Computers & Fluids,2012,66(7)：130-139．
[20]
Du L,Xin Z,Yan W．Subsonic Flows in a Multi-Dimensional Nozzle[J]．Archive for Rational Mechanics and Analysis,2011,201(3)：965-1012．
[21]
童军杰,徐进良,岑继文．喉部不对称对微喷管性能影响[J]．航空动力学报,2010,25(4)：43-47．Tong Junjie,Xu Jinliang,Cen Jiwen．Effects of throat asymmetry on micro nozzle's performance[J]．Journal of Aerospace Power,2010,25(4)：43-47(in Chinese)．
[22]
Boyarko G A,Sung C J,Schneider S J．Catalyzed combustion of hydrogen-oxygen in platinum tubes for micro-propulsion applications[J]．Proceedings of the Combustion Institute,2005,30(2)：2481-2488．
[23]
Krejci D,Woschnak A,Scharlemann C,et al．Structural impact of honeycomb catalysts on hydrogen peroxide decomposition for micro propulsion[J]．Chemical Engineering Research and Design,2012,90(12)：2302-2315．
[24]
Shirsat V,Gupta A K．Extinction,discharge,and thrust characteristics of methanol fueled meso-scale thrust chamber[J]．Applied Energy,2013,103(11)：375-392．
[25]
Gaydon A G,Wolfhard H G．Flames,their structure,radiation,and Temperature[M]．London：Chapman & Hall,1979：102-109．
