张保会,尹项根．电力系统继电保护[M]．2版．北京：中国电力出版社,2009：166．Zhang Baohui,Yin Xianggen．Power system protective relaying[M]．2nd ed．Beijing：China Electric Power Press,2009：166(in Chinese)．
[2]
王维俭,王祥珩,王赞基．大型发电机变压器内部故障分析与继电保护[M]．北京：中国电力出版社,2006：205-206．Wang Weijian,Wang Xiangheng,Wang Zanji．Analysis and relay protection of internal faults in large generators and transformers[M]．Beijing：China Electric Power Press,2006：205-206(in Chinese)．
[3]
Abi-Samra N,Arteaga J,Darovny B,et al．Power transformer tank rupture and mitigation：a summary of current state of practice and knowledge by the task force of IEEE power transformer subcommittee[J]．IEEE Transactions on Power Delivery,2009,24(4)：1959-1967．
[4]
Mahieu W R．Prevention of high fault ruptures of pole-type distribution transformers[J]．IEEE Transactions on Power Apparatus Systems,1975,94(5)：1698-1707．
[5]
Foata M,Iordanescu M,Hardy C．Computational methods for the analysis of explosions in oil-insulated electrical equipment[J]．IEEE Transactions on Power Systems,1988,3(1)：186-293．
[6]
Hamel A,Dastous J-B,Foata M．Estimating overpressures in pole-type distribution transformers,part I：tank withstand evaluation[J]．IEEE Transactions on Power Delivery,2003,18(1)：113-119．
[7]
Dastous J-B,Foata M,Hamel A．Estimating overpressures in pole-type distribution transformers,part II：prediction tools[J]．IEEE Transactions on Power Delivery,2003,18(1)：120-127．
[8]
Muller S,Brady R．Prevention of transformer tank explosion,part 1：experimental tests on large transformers[C]//2008 ASME Pressure Vessels and Piping Division Conference．Chicago,USA：ASME,2008：357-365．
[9]
Brady R,Muller S．Prevention of transformer tank explosion,part 2：development and application of a numerical simulation tool[C]//2008 ASME Pressure Vessels and Piping Division Conference．Chicago,USA：ASME,2008：49-58．
[10]
Perigaud G,Muller S,Bressy G de,et al．Contribution to the study of transformer tank rupture due to internal arcing development of a computer simulation tool[C]// Power and Energy Society General Meeting-Conversion and Delivery of Electrical Energy in the 21st Century．Pittsburgh,USA：IEEE,2008：1-8．
[11]
贺家李,宋从矩．电力系统继电保护原理[M]．3版．北京：中国电力出版社,1994：186-187．He Jiali,Song Congju．Power system relay protection [M]．3rd ed．Beijing：China Electric Power Press,1994：186-187(in Chinese)．
[12]
姚志松,姚磊．变压器油的选择、使用和处理[M]．北京：机械工业出版社,2007：27．Yao Zhisong,Yao Lei．Selection,use and treatment of transformer oil[M]．Beijing：China Machine Press,2007：27(in Chinese)．
[13]
姚志松,姚磊．中小型变压器实用全书[M]．北京：机械工业出版社,2008：891-898．Yao Zhisong,Yao Lei．Practical encyclopedia of middle and small sized transformers[M]．Beijing：China Machine Press,2008：891-898(in Chinese)．
[14]
Dastous J-B,Lanteigne J,Foata M．Numerical method for the investigation of fault containment and tank rupture of power transformers[J]．IEEE Transactions on Power Delivery,2010,25(3)：1657-1665．
[15]
Temkin S．Elements of acoustics[M]．New York：Acoustical Society of America,2001：189-193．
[16]
Courant R,Friedrichs K O,Lewy H．On the partial differential equations of mathematical physics[J]．IBM Journal of Research and Development,1967,11(2)：215-234．
[17]
王维俭,王祥珩,王赞基．大型发电机变压器内部故障分析与继电保护[M]．北京：中国电力出版社,2006：205-208．Wang Weijian,Wang Xiangheng,Wang Zanji．Analysis and relay protection of internal faults in large generators and transformers[M]．Beijing：China Electric Power Press,2006：205-208(in Chinese)．
[18]
闫晨光,郝治国,张保会等．基于电压、电流信息的变压器保护原理分析[J]．电力自动化设备,2010,30(10)：37-71．Yan Chenguang,Hao Zhiguo,Zhang Baohui,et al．Analysis of transformer protection principle based on voltage and current information[J]．Electric Power Automation Equipment,2010,30(10)：37-41 (in Chinese)．
[19]
ANSI,IEEE Std C57.12.20TM．IEEE standard for overhead-type distribution transformer,500 kVA and smaller：high voltage,34 500 V and below；low voltage,7970/13 800Y V and below[S]．2005．
[20]
尚振球．交流电弧能量计算曲线的绘制和应用[J]．西安交通大学学报,1963(1)：81-95．Shang Zhenqiu．AC arc energy calculation curve and application[J]．Journal of Xi’an Jiaotong University,1963(1)：81-95(in Chinese)．
[21]
Bastard P,Bertrand P,Meunier M．A transformer model for winding fault studies[J]．IEEE Transactions on Power Delivery,1994,9(2)：690-699．
[22]
Kezunovic M,Guo Yong．Modeling and simulation of the power transformer faults and related protective relay behavior[J]．IEEE Transactions on Power Delivery,2000,15(1)：44-50．
[23]
王赞基,刘秀成,陈香辉．用于内部故障分析的变压器电感参数计算模型[J]．电力系统自动化,2000,24(24)：21-25．Wang Zanji,Liu Xiucheng,Chen Xianghui．An inductance calculation model of power transformer for internal fault analysis[J]．Automation of Electric Power Systems,2000,24(24)：21-25(in Chinese)．
[24]
王雪,王增平．变压器内部故障仿真模型的设计[J]．电网技术,2004,28(12)：50-52．Wang Xue,Wang Zengping．Study of simulation of transformer with internal faults[J]．Power System Technology,2004,28(12)：50-52(in Chinese)．
[25]
Dastous J-B,Foata M．Analysis of faults in distribution transformers with MSC/PISCES-2DELK[C]//MSC World Users’ Conference．Los Angeles,USA：MSC Software,1991：1-13．
[26]
ANSI,IEEE Std C57.12.20TM．IEEE standard for overhead-type distribution transformer 500 kVA and smaller：high voltage,34 500 V and below；low voltage,7970/13 800Y V and below[S]．2011．
