李朋,张保会,郝治国,等,基于电气量特征的变压器绕组变形监测技术现状与展望[J]．电力自动化设备,2006,26(2)：28-32． Li Peng,Zhang Baohui,Hao Zhiguo,et al．Actuality and prospect of transformer winding deformation monitoring based on electric characteristic[J]．Electric power automation equipment,2006,26(2)：28-32(in Chinese)．
[2]
中华人民共和国国家发展和改革委员会．DL/T 1093— 2008 电力变压器绕组变形的电抗法检测判断导则[S]．北京：中国电力出版社,2008． National Development and Reform Committee of P.R. of China．DL/T 1093—2008 Guide for reactance method to detect and diagnose winding deformation of power transformer[S]．Beijing：China Electric Power Press,2008(in Chinese)．
[3]
中华人民共和国国家发展和改革委员会．DL/T911— 2004 电力变压器绕组变形的频率响应分析法[S]．北京：中国电力出版社,2005． National Development and Reform Committee of P.R. of China．DL/T 911-2004 Frequency response analysis on winding deformation of power transformer[S]．Beijing：China Electric Power Press,2005(in Chinese)．
[4]
王雪,王增平．基于有限元法的变压器电感参数计算方法的研究[J]．电力系统保护与控制,2009,37(24)：11-14,35． Wang Xue,Wang Zengping．An investigation on transformer inductance calculation based on finite element method[J]．Power System Protection and Control,2009,37(24)：11-14,35(in Chinese)．
[5]
邓祥力,熊小伏,高亮,等．基于参数辨识的变压器绕组变形在线监测方法[J]．中国电机工程学报,2014,34(28)：4950-4958． Deng Xiangli,Xiong Xiaofu,Gao Liang,et al．Method of On-line monitoring of transformer winding deformation based on parameter identification[J]．Proceedings of the CSEE,2014,34(28)：4950-4958．
[6]
徐大可,汲胜昌,李彦明．变压器绕组变形在线监测的理论研究[J]．高电压技术,2000,26(3)：16-18． Xu Dake,Xi shengchang,Li Yanming．A theoretical research on on-line monitoring of winding deformation of power transformer[J]．High Voltage Engineering,2000,26(3)：16-18(in Chinese)．
[7]
[苏]C.B.瓦修京斯基．变压器的理论与计算[M]．崔立君,杜恩田,译．北京：机械工业出版社,1998,18(6)：136-139． Васютинский С Б．The theory of transformer and calculation[M]．Cui Lijun,Du Entian,Translate．Beijing：China Machine Press,1998,18(6)：136-139(in Chinese)．
邓祥力,王传启,张哲．基于回路平衡方程和励磁电感的特高压变压器保护[J]．中国电机工程学报,2012,32(1)：147-153． Deng Xiangli,Wang Chuanqi,Zhang Zhe．UHV transformer protection based on equivalent circuit equation and excitation inductance[J]．Proceedings of the CSEE,2012,32(1)：147-153(in Chinese)．
[10]
邓祥力,高亮,刘建峰,等．特高压变压器模型漏感参数的稳态识别方法[J]．电工技术学报,2014,29(5)：254-260． Deng Xiangli,Gao Liang,Liu Jianfeng,et al．Steady-state parameter identification of uhv transformer model[J]．Transactions Of China Electrotechnical Society,2014,29(5)：254-260(in Chinese)．
[11]
Pauick Bastard,Pierre Bertrand,Michel Meunier．A transformer model for winding fault studies[J]．IEEE Transactions on Power Delivery,1994,9(2)：690-699．
[12]
王赞基,刘秀成,陈香辉,用于内部故障分析的变压器电感参数计算模型[J]．电力系统自动化,2000,24(24)：21-25． Wang Zanji,Liu Xiucheng,Chen Xianghui．An inductance calculation model of power transformer for internal fault analysis[J]．Automation of Electric Power Systems,2000,24(24)：21-25(in Chinese)．
[13]
汲胜昌,王俊德,李彦明．稳态条件下变压器绕组轴向振动特性研究[J]．电工电能新技术,2006,25(1)：35-38． Ji Shengchang,Wang Junde,Li Yanming．Generalized coordinates transformation theory of multiphase system[J]．Advanced Technology of Electrical Engineering and Energy,2006,25(1)：35-38(in Chinese)．
[14]
王世山,汲胜昌,李彦明．电缆绕组变压器短路时线圈轴向稳定性的研究[J]．中国电机工程学报,2004,24(2)：166-170． Wang Shishan,Ji Shengchang,Li Yanming．Study on axial stability in condition of short-circuit for power transformer using XLPE insulated cable windings[J]．Proceedings of the CSEE,2004,24(2)：166-170(in Chinese)．
王健峰,张磊,陈国兴,等．基于改进的网格搜索法的SVM参数优化[J]．应用科技,2012,39(3)：28-31． Wang Jianfeng,Zhang Lei,Chen Guoxing,et al．A parameter optimization method for an SVM based on improved grid search algorithm[J]．Applied Science and Technology,2012,39(3)：28-31(in Chinese)．
[17]
赵文清,朱永利,张小奇．应用支持向量机的变压器故障组合预测[J]．中国电机工程学报,2008,28(25)：14-19． Zhao Wenqin,Zhu Yongli,Zhang Xiaoqi．Combinational forecast for transformer faults based on support vector machine[J]．Proceedings of the CSEE,2008,28(25)：14-19(in Chinese)．
[18]
费胜巍,苗玉彬,刘成良,等．基于粒子群优化支持向量机的变压器故障诊断[J]．高电压技术,2009,35(3)：509-513． Fei Shengwei,Miao Yubin,Liu Chengliang,et al．Fault diagnosis of transformer based on particle swarm optimization-based support vector machine[J]．High Voltage Engineering,2009,35(3)：509-513(in Chinese)．
[19]
Bigdeli M,Vakilian M,Rahimpour E．Transformer winding faults classification based on transfer function analysis by support vector machine[J]．IEEE IET Electric Power Applications,2012,6(5)：268-276．
[20]
王璋奇,王孟．电力变压器绕组轴向振动稳定性分析[J]．中国电机工程学报,2002,22(7)：24-28． Wang Zhangqi,Wang Meng．Stability of axial vibration of power transformer windings[J]．Proceedings of the CSEE,2002,22(7)：24-28(in Chinese)．
[21]
李维刚,朱仙福．PDE工具箱在静磁场中的应用[J]．机车电传动,2003(4)：29-35． Li Weigang．Zhu Xianfu．Application of PDE tool box in magnetostatic field[J]．Electric Drive For Locomotives,2003(4)：29-35(in Chinese)．
[22]
林辉,王德成．支持向量机的参数优化及其在故障诊断中的应用[J]．计算机科学,2010,37(4)：255-257． Lin Hui,Wang Decheng．Optimizing support vector machine parameters and applicationt to fault diagnosis[J]．Computer Science,2010,37(4)：255-257(in Chinese)．
[23]
董明,孟源源,徐长响,等．基于支持向量机及油中溶解气体分析的大型电力变压器故障诊断模型研究[J]．中国电机工程学报,2003,23(7)：88-92． Dong Ming,Meng Yuanyuan,Xu Changxiang,et al．Fault diagnosis model for power transformer based on support vector machine and dissolved gas analysis[J]．Proceedings of the CSEE,2003,23(7)：88-92(in Chinese)．
