陈乾伟,时运来,黄卫清．新型塔形直线超声电机[J]．中国电机工程学报,2010,30(36)：27-32． Chen Qianwei, Shi Yunlai, Huang Weiqing．A novel tower-shaped linear ultrasonic motor[J]．Proceedings of the CSEE,2010,30(36)：27-32(in Chinese)．
[2]
李朝东,何晓菁．卧式板型直线超声电机的微型化[J]．光学精密工程,2010,18(4)：887-892． Li Chaodong,He Xiaojing．Miniaturization of board-type horizontal linear ultrasonic motor[J]．Optics and Precision Engineering,2010,18(4)：887-892(in Chinese)．
[3]
赵淳生．超声电机技术与应用[M]．北京：科学出版社,2007：313-317． Zhao Chunsheng．Ultrasonic motor technologies and applications[M]．Beijing：Science Press,2007：313-317．
[4]
张军,时运来,梁大志,等．直线超声电机驱动精密二维定位平台系统[J]．中国电机工程学报,2014,34(18)：2960-2966． Zhang Jun,Shi Yunlai,Liang Dazhi,et al．A 2-D precision positioning table system driven by linear ultrasonic motors[J]．Proceedings of the CSEE,2014,34(18)：2960-2966(in Chinese)．
[5]
时运来,赵淳生．蝶形直线超声电机优化设计[J]．振动、测试与诊断,2012,32(6)：883-891． Shi Yunlai,Zhao Chunsheng．Application of response surface methodology for optimization of butterfly- shaped linear ultrasonic motor[J]．Journal of Vibration Measurement and Diagnosis, 2012,32(6)：883-891(in Chinese)．
[6]
苏松飞,姚志远,耿冉冉,等．U形直线超声电机结构设计[J]．哈尔滨工程学报,2012,33(6)：759-763． Su Songfei,Yao Zhiyuan,Geng Ranran,et al．Structure design of a linear ultrasonic motor with a U-shaped vibrator[J]．Journal of Harbin Engineering University,2012,33(6)：759-763(in Chinese)．
[7]
Jong Seok Rho,Byung Jai Kim,et al．Design and characteristic analysis of L1B4 ultrasonic motor considering contact mechanism[J]．IEEE Transactions on Ultrasonics,Ferroelectrics,and Frequency Control,2005,52(11)：2054-2064．
[8]
陶征,赵淳生．基于ANSYS的纵扭超声电机定子的优化设计方法[J]．压电与声光,2007,29(5)：603-608． Tao Zheng,Zhao Chunsheng．The optimal design about stator of ultrasonic mptpr using longitudinal and torsional mode based on ANSYS[J]．Piezoelectrics and Acoustooptics,2007,29(5)：603-608(in Chinese)．
[9]
陈超,曾劲松,朱华,等．微型行波超声电机定子的参数优化设计[J]．中国机械工程,2009,29(5)： 568-572． Chen Chao,Zeng Jinsong,Zhu Hua,et al．Parameter optimization of stator of traveling wave ultrasonic motor[J]．China Mechanical Engineering,2009,29(5)：568-572(in Chinese)．
[10]
张健滔,朱华,赵淳生．行波型杆式超声电机定子的参数化有限元法优化设计[J]．振动与冲击,2009,28(7)：122-125． Zhang Jiangtao, Zhu Hua,Zhao Chunsheng．FEM-based parametric optimum design of a traveling- type bar-like ultrasonic motor stator[J]．Journal of Vibration and Shock,2009,28(7)：122-125(in Chinese)．
[11]
时运来,李玉宝,赵淳生．面内模态直线型超声电机的优化设计[J]．中国电机工程学报,2008,28(30)：56-60． Shi Yunlai,Li Yubao,Zhao Chunsheng．Optimum design of a linear ultrasonic motor based on in-plate modes [J]．Proceedings of the CSEE,2008,28(30)：56-60(in Chinese)．
[12]
江国和,吴广明,沈荣瀛．振动控制中的功率流方法研究现状[J]．华东船舶工业学院学报,2003,17(4)：17-22． Jiang Guohe,Wu Guangming,Shen Rongying．Advance in study on power flow method in vibration control [J]．Journal of East China Shipbuilding Institute,2003,17(4)：17-22(in Chinese)
[13]
姚志远,杨东,赵淳生．杆结构直线超声电机的结构设计和功率流分析[J]．中国电机工程学报,2009,29(24)： 56-60． Yao Zhiyuan,Yang Dong,Zhao Chunsheng．Structure design and power flow analysis of bar-structure linear ultrasonic motors[J]．Proceedings of the CSEE,2009,29(24)：56-60(in Chinese)．
[14]
韩旭,郭永进,朱平,等．基于诺顿等效系统功率流计算的多维振动传递特性研究[J]．振动与冲击,2007,26(5)：44-47． Han Xu,Guo Yongjin,Zhu Ping,et al．Study on multi-dimensional vibration transmission performance based on vibration power flow calculation with Norton equivalent system[J]．Journal of Vibration and Shock, 2007,26(5)：44-47(in Chinese)．
[15]
吴大德,王立兵,王宇宁．基于机-电相似的隔振系统功率流计算和分析[J]．噪声和振动控制,2011(2)：12-16. Wu Dade,Wang Libing,Wang Yuning．Power flow calculation and analysis of vibration isolation system based on the machine-electric simulation[J]．Noise and Vibration Control,2011(2)：12-16(in Chinese)．
[16]
张健滔,李朝东,何晓菁．卧板式直线超声电机的特性分析模型[J]．中国电机工程学报,2012,32(18)：137-144． Zhang Jiangtao,Li Chaodong,He Xiaojing．Modeling for characteristic analysis of a plate-type linear ultrasonic motor[J]. Proceedings of the CSEE,2012,32(18)：137-144(in Chinese)．
[17]
Sharp S,Paine J,Blotter J．Design of a linear piezoelectric motor[J]．Journal of Intelligent Material Systems and Structures,2010(21)：961-973．
