李广,张鸣,朱煜,等．六自由度磁浮微动台电磁场建模与计算[J]．清华大学学报：自然科学版,2010,50(12)：1978-1982． Li Guang,Zhang Ming,Zhu Yu,et al．Six degree- of-freedom maglev microstage electromagnetic field modeling and calculation[J]．Journal of Tsinghua University：Science and Technology,2010,50(12)：1978-1982(in Chinese)．
[2]
朱煜,尹文生,段广洪．光刻机超精密工件台研究[J]．电子工业专用设备,2004(2)：25-27+44． Zhu Yu,Yin Wensheng,Duan Guanghong．Research on ultra-precision stages of lithography[J]．Equipment for Electronic Products Manufacturing,2004(2)：25-27+44(in Chinese) ．
[3]
Boshuisen R．Analysis and performance of a lightweight over-actuated 450mm wafer chuck[D]．Delft：Delft University of Technology,2010．
[4]
Thompson E,Hellebrekers P,Hofemann P,et al．450mm wafer patterning with jet and flash imprint lithography [C]//SPIE Photomask Technology．Monterey,California,United States： International Society for Optics and Photonics,2013：88800J-88800J-8．
[5]
李恒,朱煜,贾松涛,等．电磁式超精密微动工作台研究现状与方向[J]．现代机械,2007(2)：1-3． Li Heng,Zhu Yu,Jia Songtao,et al．Research and development of ultra-precision magnetic stage [J]．Modern Machinery,2007(2)：1-3(in Chinese)
[6]
刘羽, 张鸣,朱煜．超精密工作台洛伦兹电动机优化设计[J]．微特电机,2011,39(10)：1-3． Liu Yu,Zhang Ming,Zhu Yu．Optimization of lorentz motor used in ultra-precision stages[J]．Small & Special Electrical Machines,2011, 39(10)：1-3(in Chinese)．
[7]
滕伟,柳亦兵,武鑫,等．洛伦兹平面电机解耦控制与参数校准[J]．中国电机工程学报,2012,32(21)：112-118． Teng Wei,Liu Yibing,Wu Xin,et al．Decoupling control and control parameter calibration for lorentz planar motors[J]．Proceedings of the CSEE,2012,32(21)：112-118(in Chinese)．
[8]
陈清亮．电磁驱动快速刀具伺服机构的研究[D]．长春：吉林大学,2012． Chen Qingliang．Research on electromagnetically-driven fast tool servos[D]．Changchun：Jilin University, 2012(in Chinese)．
[9]
沈建新,郝鹤,袁承．高速永磁无刷电机转子护套周向开槽的有限元分析[J]. 中国电机工程学报,2012,32(36)：53-60． Shen Jianxin,Hao He,Yuan Cheng．FEA Study on circumferential grooves on rotor retaining sleeve of high- speed pm brushless motors[J]．Proceedings of the CSEE,2012,32(36)：53-60(in Chinese)．
[10]
向洪岗,陈德桂,李兴文,等．基于三维磁场分析建立电磁铁等效磁路的研究[J]．西安交通大学学报,2003,37(8),808-811． Xiang Honggang,Chen Degui,Li Xingwen,et al．Construction of equivalent magnetic circuit for electromagnet based on 3-D magnetic field[J]．Journal of Xi’an Jiaotong University,2003,37(8),808-811(in Chinese)．
[11]
宫晓,徐衍亮．轴向磁场盘式永磁电机等效磁路网络及气隙漏磁的分析计算[J]．电机与控制学报,2013,17(10): 59-64． Gong Xiao,Xu Yan-Liang．Lumped parameter magnetic circuit analysis of axial flux permanent magnet motor and its analytical calculation of air gap leakage[J]．Electric Machines and Control,2013, 17(10)：59-64(in Chinese)．
[12]
Lu X．Electromagnetically-driven ultra-fast tool servos for diamond turning[D]．Massachusetts：Massachusetts Institute of Technology,2005．
[13]
郑永成,王洋,何建国,等．基于磁场分割的磁导计算与磁路设计[J]．机械与电子,2006(7),11-13． Zheng Yongcheng,Wang Yang,He Jianguo,et al．Permeance calculation and magnetic circuit design based on magnetic field division[J]．Machinery & Electronics,2006(7),11-13(in Chinese)．
[14]
林其任,赵佑民．磁路设计原理[M]．北京：机械工业出版社,1987． Lin Qiming,Zhao Youmin．Design principle of magnet circle[M]．Beijing：China Machine Press,1987(in Chinese)
[15]
Studer P A．A practical magnetic bearing[J]．IEEE Tran．on Magnetics,1977,13(5)：1155-1157．
聂雅慧．麦克斯韦力刀具伺服系统天津大学[D]．天津：天津大学,2010． Xia Yahui．Tool servo system driven by maxwell force[D]．Tianjin：Tianjin University,2010(in Chinese)．
[19]
武瑾,庄劲武,王晨,等．电磁斥力机构数学模型的简化与求解[J]．中国电机工程学报,2013,33(24)：175-182． Wu Jin,Zhang Jinwu,Wang Chen,et al．Simplification and solution of the mathematical model to electromagnetic repulsion mechanism[J]．Proceedings of the CSEE,2013,33(24)：175-182(in Chinese)．
[20]
叶建盈,陈为．一种有气隙磁元件高频绕组损耗的测量评估方法[J] ．中国电机工程学报,2015,35(7)：1749-1755． Ye Jianying,Chen Wei．A novel evaluation and test method for gapped magnetic high-frequency winding losses[J]．Proceedings of the CSEE,2015,35(7)：1749-1755(in Chinese)．
[21]
李广,张鸣,朱煜,等．六自由度微动台热特性分析与散热设计[J]．组合机床与自动化加工技术,2011(3)：1-3+7． Li Guang,Zhang Ming,Zhu Yu,et al．Six-DOF microstage thermal analysis and cooler design[J]．Modular Machine Tool & Automatic Manufacturing Technique,2011(3)：1-3+7(in Chinese)．
[22]
Vrijsen N H,Jansen J W,Lomonova E A．Comparison of linear voice coil and reluctance actuators for high- precision applications[C]//14th International Power Electronics and Motion Control Conference (EPE/PEMC)．Ohrid,Republic of Macedonia： IEEE,2010：S3-29-S3-36．
[23]
Katalenic A．Control of reluctance actuators for high- precision positioning[D]．Eindhoven：Eindhoven University of Technology,2013．
[24]
李泓志,崔翔,卢铁兵,等．变压器直流偏磁的电路-磁路模型[J]．中国电机工程学报,2009,29(27)：119-125． Li Hongzhi,Cui Xiang,Lu Tiebing,et al．Electric circuit and magnetic circuit combined model of DC biased power transformer[J]．Proceedings of the CSEE,2009,29(27)：119-125(in Chinese)．
[25]
邹亮,李庆民,许家响,等．考虑漏磁效应的永磁饱和型故障限流器磁路建模与实验研究[J]．中国电机工程学报,2012,32(21)：137-145． Zou Liang,Li Qingmin,Xu Jiaxiang,et al．Magnetic topology modeling and experimental study of permanent- magnet-biased saturation based fault current limiter with leakage flux effect[J]．Proceedings of the CSEE,2012,32(21)：137-145(in Chinese)．
