| [1] | Suder K L，Chima R V，Strazisar A J，et al． The effect of adding roughness and thickness to a transonic axial compressor rotor[J]． ASME Journal of Turbomachinery， 1995，117(4)：491-505．
|
| [2] | Morini M，Pinelli M，Spina P R，et al． Computational fluid dynamics simulation of fouling on axial compressor stages[J]． Journal of Engineering for Gas Turbines and Power， 2010，132(2)：072401-1-072401-10．
|
| [3] | Morini M，Pinelli M，Spina P R，et al． Numerical analysis of the effects of non-uniform surface roughness on compressor stage performance[C]// IGTI ASME Turbo Expo，Glasgow，UK，2010．
|
| [4] | Gbadebo S A，Hynes T P，Cumpsty N A． Influence of surface roughness on three-dimensional separation in axial compressors[J]． ASME Journal of Turbomachinery， 2004，126(4)：455-463．
|
| [5] | Kurz R，Brun K． Fouling mechanisms in axial compressors[C]// IGTI ASME Turbo Expo: Power for Land Sea and Air, Vancouver，Canada，2011．
|
| [6] | 刘勋，周逊，温风波，等． F级中低热值燃料燃气轮机透平部分气动方案优化设计与分析[J]． 中国电机工程学报， 2011，31(26)：1-8． Liu Xun，Zhou Xun，Wen Fengbo，et al．Aerodynamic optimization design and analysis on the turbine part of F class gas turbine under middle and low heat value fuel[J]．Proceedings of the CSEE，2011，31(26)
|
| [7] | 马文通，苏明，余南华． 变几何多级轴流压气机特性估算[J]． 中国电机工程学报， 2008，28(11)：72-76． Ma Wentong，Su Ming，Yu nanhua，et al．Characteristic estimation method of variable geometry multistage axial flow compressors[J]．Proceedings of the CSEE，2008，28(11)
|
| [8] | ANSYS CFX-Solver，Release 10． 0：Theory[M]． ANSYS， Inc，USA，2005：97-101．
|
| [9] | 张辰，陈绍文，石慧，等． 污垢沉积影响压气机级特性的数值研究[C]//中国工程热物理学会？热机气动热力学与流体机械学术会议，武汉，2011． Zhang Chen， Chen Shaowen，Shi Hui et al．Numerical study on the impact of fouling on axial compressor stages[C]// The Conference for Thermal Engine，Aerothermodynamics and Fluid Machinery Academic ，Wuhan，2011(in Chinese)．
|
| [10] | 陈绍文，张辰，石慧，等． 轴流压气机级内污垢沉积影响的数值研究[J]． 推进技术， 2012，33(3)：377-383． Chen Shaowen，Zhang Chen，Shi Hui，et al．Numerical study on the impact of fouling on axial compressor stages[J]．Journal of Propulsion Technology，2012，33(3)
|
| [11] | Simon W E，Howard P H． The cost of flow control in a compressor[C]// IGTI ASME Turbo Expo: Power for Land Sea and Air, Vancouver，Canada，2011．
|
| [12] | Gmelin C，Steger M，Huppertz A，et al． Unsteady RANS simulations of a highly loaded low aspect ratio compressor stator cascade with active flow control[C]// IGTI ASME Turbo Expo，Glasgow，UK，2010．
|
| [13] | Zheng X Q，Zhou，S，Lu Y J，et al． Flow control of annular compressor cascade by synthetic jets[J]． Journal of Turbomachinery， 2008，130(2)：1-7．
|
| [14] | Schneider E，Demircioglu S，Franco S，et al． Analysis of compressor on-line washing to optimize gas turbine power plant performance[C]// IGTI ASME Turbo Expo， Orlando，USA，2009．
|
| [15] | Tabakoff W，Lakshminarasimha，A N，Pasin M． Simulation of compressor performance deterioration due to erosion[J]． ASME Journal of Turbomachinery， 1990，112(1)：78-83．
|
| [16] | Massardo A． An analytical method for the fault diagnosis of axial multistage compressors[C]// IGTI ASME Turbo Expo，Montreal，Canada，1991．
|
| [17] | Bammert K，Woelk G U． The influence of the blading surface roughness on the aerodynamic behavior and characteristic of an axial compressor[C]//ASME Journal of Engineering for Power，1980，102(2)：283-287．
|
| [18] | Syverud E，Brekke O，Bakken L E． Axial Compressor Deterioration Caused by Saltwater Ingestion[J]． ASME Journal of Turbomachinery， 2007，129(1)：119-127．
|
| [19] | Syverud E，Bakken L E． The impact of surface roughness on axial compressor performance deterioration[C]// IGTI ASME Turbo Expo，Barcelona，Spain，2006：GT2006-90004．
|
| [20] | Veer T，Haglerod K K，Bolland O． Measured data correction for improved fouling and degradation analysis of offshore gas turbines[C]// IGTI ASME Turbo Expo， Vienna，Austria，2004．
|
| [21] | Meher-Homji C B，Chaker M，Bromley A F． The fouling of axial flow compressors - causes，effects，susceptibility and sensitivity[C]// IGTI ASME Turbo Expo，Orlando，USA，2009．
|
| [22] | Brekke O，Bakken L E． Performance deterioration of intake air filter for gas turbines in offshore installations[C]// IGTI ASME Turbo Expo，Glasgow，UK，2010．
|
