任保福,贾力,张竹茜,等．大容量锂离子动力电池热特性的实验研究[C]//中国工程热物理学会传热传质学术会议．东莞：东莞理工学院,2012．Ren Baofu,Jia Li,Zhang Zhuqian,et al. A study on the thermal characteristic of the large capacity lithium-ion power battery[C]//Academic conference of the Chinese Engineering Thermophysics Society’s Heat and Mass Transfer．Dongguan：Dongguan Institute of Technology,2012(in Chinese)．
[2]
Doyle M,Fuller T F,Newman J．Modeling of galvanostatic charge and discharge of the lithium/ polymer/insertion cell[J]．Journal of The Electrochemical Society,1993,140(6)：1526-1533．
[3]
Delacourt C,Safari M．Analysis of lithium deinsertion/ insertion in LiyFePO4 with a simple mathematical model [J]．Electrochimica Acta,2011,56(14)：5222-5229．
[4]
Pals C R,Newman J．Thermal modeling of the lithium/ polymer battery I．Discharge behavior of a single cell [J]．Journal of The Electrochemical Society,1995,142(10)：3274-3281．
[5]
Pals C R,Newman J．Thermal modeling of the lithium/ polymer battery II．Temperature profiles in a cell stack [J]．Journal of The Electrochemical Society,1995,142(10)：3282-3288．
[6]
Sun Fengchun,Chen Ke．Experimental study on heat generation and dissipation performance of PEV Lithium- ion battery[J]．High Technology Letters,2010,16(1)：1-5．
[7]
张志杰,李茂德．锂离子动力电池温升特性的研究[J]．汽车工程,2010,32(4)：320-322．Zhang Zhijie,Li Maode．A study on the temperature rise characteristic of lithium-ion power battery[J]．Automotive Engineering,2010,32(4)：320-322(in Chinese)．
[8]
杨凯,李大贺,陈实,等．电动汽车动力电池的热效应模型[J]．北京理工大学学报,2008,28(9)：782-785．Yang Kai,Li Dahe,Chen Shi,et al．Thermal model of batteries for electric vehicles[J]．Transactions of Beijing Institute of Technology,2008,28(9)：782-785(in Chinese)．
[9]
Sabbah R,Kizilel R,Selman J R,et al．Active (air-cooled) vs．passive (phase change material) thermal management of high power lithium-ion packs：limitation of temperature rise and uniformity of temperature distribution[J]．Journal of Power Sources,2008,182(2)：630-638．
[10]
Somasundaram K,Birgersson E,Mujumdar A．Thermal- electrochemical model for passive thermal management of a spiral-wound lithium-ion battery[J]．Journal of Power Sources,2012,203：84-96．
[11]
Ye Yonghuang,Shi Yixiang,Cai Ningsheng．Electro- thermal modeling and experimental validation for lithium ion battery[J]．Journal of Power Sources,2012,199(3)：227-238．
[12]
Chen Shinchih,Wang Yungyun,Wan Chichao．Thermal analysis of spirally wound lithium batteries[J]．Journal of the Electrochemical Society,2006,153(4)：A 637-A 648．
[13]
Zhang Xiongwen．Thermal analysis of a cylindrical lithium-ion battery[J]．Electrochem Acta,2011,56(3)：1246-1255．
[14]
Onda K,Ohshima T,Nakayama M,et a1．Thermal behavior of small lithium-ion battery during rapid charge and discharge cycles[J]．Journal of Power Sources,2006,158(1)：535-542．
[15]
王峰,李茂德．电池热效应分析[J]．电源技术,2010,34(3)：288-291．Wang Feng,Li Demao．Thermal performance analysis of batteries[J]．Chinese Journal of Power Sources,2010,34(3)：288-291(in Chinese)．
[16]
Subramanian V R,Boovaragavan V．Mathematical model reformulation for lithium-ion battery simulations：galvanostatic boundary conditions[J]．Journal of The Electrochemical Society,2009,156(4)：260-271．
[17]
高飞,杨凯,惠东,等．储能用磷酸铁锂电池循环寿命的能量分析[J]．中国电机工程学报,2013,33(5)：41-45．Gao Fei,Yang Kai,Hui Dong,et al．Cycle-life energy analysis of LiFePO4 batteries for energy storage [J]．Proceedings of the CSEE,2013,33(5)：41-45(in Chinese)．
[18]
Meyer M,Komsiyska L,Lenz B,et al．Study of the local SOC distribution in a lithium-ion battery and electrochemical medeling and simulation[J]．Applied Mathematical Modeling,2013,37(4)：2016-2027．
[19]
Safari M,Delacourt C．Mathematical modeling of lithium iron phosphate electrode：galvanostatic charge/discharge and path dependence[J]．Journal of the Electrochemical Society,2011,158(2)：63-73．
[20]
Safari M,Delacourt C．Modeling of a commercial Graphite/LiFePO4 cell[J]．Journal of the Electrochemical Society,2011,158(2)：562-571．
[21]
Hellwig C,Sörgel S,Bessler W G．A muti-scale electrochemical and thermal model of a LiFePO4 battery[J] ECS Transactions,2011,35(32)：215-228．
