武俊梅,陶文铨．纵向涡强化通道内换热的数值研究及机理分析[J]．西安交通大学学报,2006,40(09)：996-1000．Wu Junmei,Tao Wenquan．Numerical investigation and analysis of the heat transfer enhancement in channel by longitudinal vortex based on the field synergy principle[J]．Journal of Xi’an Jiaotong University,2006,40(09)：996-1000(in Chinese)．
[2]
苏石川,李光琛,陈明华,等．侧置梯形翼翅片管换热器流动与传热特性[J]．中国电机工程学报,2012,32(35)：87-91．Su Shichuan,Li Guangchen,Chen Huaming,et al．Flow and heat transfer analysis of fin-and-tube heat exchangers with side-mounted trapezium winglets[J]．Proceedings of the CSEE,2012,32(35)：87-91(in Chinese)．
[3]
何雅玲,楚攀,谢涛．纵向涡发生器在管翅式换热器中的应用及优化[J]．化工学报,2012,63(3)：746-760．He Yaling,Chu Pan,Xie Tao．Application and optimization of fin-and-tube heat exchangers with longitudinal vortex generators[J]．CIESC Journal,2012,63(3)：746-760(in Chinese)．
[4]
高猛,周国兵．几种涡流发生器对矩形通道流阻和传热性能影响的数值模拟[J]．中国电机工程学报,2010,30(35)：55-60．Gao Meng,Zhou Guobing．Numerical simulations on the effect of several vortex generators in rectangular channel on flow resistance and heat transfer performances[J]．Proceedings of the CSEE,2010,30(35)：55-60(in Chinese)．
[5]
周国兵,杨来顺．涡流发生器对直接空冷凝汽器换热的影响[J]．中国电机工程学报,2012,32(5)：1-8．Zhou Guobing,Yang Laishun．Influence of different vortex generators on heat transfer in direct air-cooled condensers[J]．Proceedings of the CSEE,2012,32(5)：1-8(in Chinese)．
[6]
Kang H C,Kim M H．Effect of strip location on the air-side pressure drop and heat transfer in strip fin-and-tube heat exchanger[J]．International journal of refrigeration,1999,22(4)：302-312．
[7]
徐志明,王宇朋,刘坐东,等．翼型涡流发生器抑垢性能的实验研究[J]．工程热物理学报,2012,33(011)：1936-1939．Xu Zhiming,Wang Yupeng,Liu Zuodong,et al．Experimental investigation on the characteristic of restraining fouling of wing-type vortex generators[J]．Journal of Engineering Thermophysics,2012,33(011)：1936-1939(in Chinese)．
[8]
过增元,黄素逸．场协同原理与强化传热新技术[M]．中国电力出版社,2004：36-38．Guo Zengyuan,Huang Suyi．Field synergy principle and heat transfer enhancement new technology[M]．China Electric Power Press,2004：36-38(in Chinese)．
[9]
陈群,任建勋,过增元．流体流动场协同原理及其在减阻中的应用[J]．科学通报,2008,53(4)：489-492．Chen qun,Ren Jianxun,Guo Zengyuan．Fluid flow field synergy principle and it’s application in drag reduction[J]．Chinese Science Bulletin,2008,53(4)：489-492(in Chinese)．
[10]
屈治国,何雅玲,陶文铨．平直开缝翅片传热特性的三维数值模拟及场协同原理分析[J]．工程热物理学报,2003,24(5)：825-827．Qu Zhiguo,He Yaling,Tao Wenquan．3D numerical simulation on heat transfer performance of slit fin surface and analysis with field synergy principle[J]．Journal of Engineering Thermophysics,2003,24(5)：825-827(in Chinese)．
[11]
Steinhagen R,Müller-Steinhagen H,Maani K．Problems and costs due to heat exchanger fouling in New Zealand industries[J]．Heat Transfer Engineering,1993,14(1)：19-30．
[12]
徐志明,杨善让,郭淑青,等．电站锅炉污垢费用估算[J]．中国电机工程学报,2004,24(2)：197-201．Xu Zhiming,Yang Shanrang,Guo Shuqing,et al．Approach to costing the utility boiler fouling in china[J]．Proceedings of the CSEE,2004,24(2)：197-201(in Chinese)．
[13]
杨善让,徐志明,孙灵芳,等．换热设备污垢与对策[M]．2版．科学出版社,2004：4-5．Yang Shanrang,Xu Zhiming,Sun Lingfang,et al．Fouling of Heat Exchangers and the countermeasure[M]．Second Edition．Science Press,2004：4-5(in Chinese)．
[14]
孔祥兵．换热器管内颗粒污垢生长特性试验研究[D]．哈尔滨工业大学,2008．Kong Xiangbing．The experimental investigation of the particulate fouling growth characteristics in heat exchanger tube[D]．Harbin Institute of Technology,2008(in Chinese)．
[15]
Zhang G,Li G,Li W,et al．Particulate fouling and composite fouling assessment in corrugated plate heat exchangers[J]．International Journal of Heat and Mass Transfer,2013(60)：263-273．
[16]
顾业梅,李云,张兵强．颗粒污垢诱导期影响因素的实验研究[J]．锅炉制造,2011(2)：19-21,25．Gu Yemei,Li Yun,Zhang Bingqiang．Experiment Research on effect Factor for Particulate Fouling Induction[J]．Boiler manufacturing,2011(2)：19-21,25(in Chinese)．
[17]
Bell I H,Groll E A．Air-side particulate fouling of micro channel heat exchangers：experimental comparison of air-side pressure drop and heat transfer with plate-fin heat exchanger[J]．Applied Thermal Engineering,2011,31(5)：742-749．
[18]
徐志明,董兵,杜祥云,等．板式换热器颗粒污垢特性的实验研究[J]．动力工程学报．2013,33(7)：539-543．Xu Zhiming,Dong Bing,Du Xiangyun,et al．Experimental Study on particle Fouling in plate heat exchangers[J]．Journal of Chinese Society of Power Engineering．2013,33(7)：539-543(in Chinese)．
[19]
张仲彬,李煜,杜祥云,等．水质对板式换热器结垢的影响权重及其机制分析[J]．中国电机工程学报,2012,32(32)：69-74．Zhang Zhongbin,Li Yu,Du Xiangyun,etal．Influences of water quality’s effect weights and mechanisms on fouling of plate heat exchangers[J]．Proceedings of the CSEE,2012,32(32)：69-74(in Chinese)．
[20]
李蔚,张巍,李冠球,等．螺纹管内污垢热阻的对比实验研究[J]．工程热物理学报,2009(9)：1578-1580．Li Wei,Zhang Wei,Li Guanqiu,et al．Experimental research on the fouling resistant of internal helical-rib tubes[J]．Journal of Engineering Thermophysics,2009(9)：1578-1580(in Chinese)．
[21]
王建国,刘高生,孙伟．电磁场作用下循环水污垢热阻的灰色预测模型实验研究[J]．中国电机工程学报,2013,33(11)：61-61．Wang Jianguo,Liu Gaosheng,Sun Wei．Experiment research on fouling resistance grey forecast model for circulating water in electromagnetic field[J]．Proceedings of the CSEE,2013,33(11)：61-61(in Chinese)．
[22]
徐志明,李兴灿,王宇朋,等．不连续双斜向内肋管污垢特性实验研究[J]．中国电机工程学报,2012,32(32)：64-68．Xu Zhiming,Li Xingcan,Wang Yupeng,etal．Experimental investigation on fouling characteristics of the discrete double inclined ribs tube[J]．Proceedings of the CSEE,2012,32(32)：64-68(in Chinese)．
[23]
Fiebig M．Vortices and heat transfer[J]．ZAMM Z Angew Math Mech,1997,77(1)：3-18．
