Smith L H．Casing boundary layers in multistage axial-flow compressors[C]//Flow Research on Blading：Proceedings of the Symposium on Flow Research on Blading, Brown,Boveri & Company Limited,Baden Switzerland,1969．
[2]
Smith L H．Wake Dissipation in Turbomachines [J]．Journal of Basic Engineering,1966,88(3)：88-690．
杜鑫,焦映厚,张龙新,等．端弯控制扩压叶栅角区分离的机制分析[J]．中国机电工程学报,2014,34(2)：309-314．Du Xin,Jiao Yinghou,Zhang Longxin,et al．Mechanism study on the end-bend blade controlling the corner separation[J]．Proceedings of the CSEE,2014,34(2)：309-314(in Chinese)．
[5]
丁骏,杜鑫,姜斌,等．三维叶片技术对离心风机气动性能的影响[J]．中国机电工程学报,2012,32(32)：109-115．Ding Jun,Du Xin,Jiang Bin,et al．Effect of three dimensional blade technology on aerodynamic performance in centrifugal fan[J]．Proceedings of the CSEE,2012,32(32)：109-115(in Chinese)．
[6]
钟兢军,韩少冰．融合式叶尖小翼对低速压气机转子气动性能的影响[J]．推进技术,2014,35(6)：749-757．Zhong Jingjun,Han Shaobing．Effects of blended tip winglet on aerodynamic performance of a Low Speed Compressor Rotor[J]．Journal of Propulsion Technology,2014,35(6)：749-757．(in Chinese)．
[7]
蔡乐,杜鑫,王松涛,等．某重型燃气轮机压气机顶切方法的数值模拟[J]．中国机电工程学报,2012,32(32)：95-100．Cai Le,Du Xin,Wang Songtao,et al．Numerical simulation analysis of the tip-cutting method in a compressor of a heavy duty gas turbine[J]．Proceedings of the CSEE,2012,32(32)：95-100(in Chinese)．
[8]
孙兰昕,郑群,李义进．两级低压压气机湿压缩数值研究[J]．中国电机工程学报,2009,29(32)：76-82．Sun Lanxin,Zheng Qun,LI Yijin．Numerical simulation of wet compression in a two-stage low-pressure compressor[J]．Proceedings of the CSEE,2009,29(32)：76-82(in Chinese)．
[9]
罗铭聪,郑群,岳国强,等．跨音速级压气机湿压缩数值研究[J]．中国电机工程学报,2013,33(5)：86-94．Luo Mingcong,Zheng Qun,Yue Guoqiang,et al．Numerical simulation of wet compression in a transonic compressor stage[J]．Proceedings of the CSEE,2013,33(5)：86-94(in Chinese)．
[10]
周莉,张鑫,蔡元虎．非定常尾迹宽度对气膜冷却效果的影响[J]．中国电机工程学报,2011,31(29)：97-102．Zhou Li,Zhang Xin,Cai Yuanhu．Effect of unsteady wake width on the film-cooling effectiveness for a gas turbine blade[J]．Proceedings of the CSEE,2011,31(29)：97-102(in Chinese)．
[11]
Zhou S,Lu Y,Hou A,et al．Unsteady cooperative flow in compression system[J]．Propulsion and Power Research,2012,1(1)：12-28．
[12]
Ji L C,Chen J．Edge matching：Part I—Theory and implementation[C]//IGTI ASME Turbo Expo,Nevada,USA,2005．
[13]
Ji L C,Chen J．Edge matching：Part II—Numerical investigations[C]//IGTI ASME Turbo Expo,Nevada,USA,2005.
[14]
Kerrebrock J L,Drela M,Merchant A A,et al．A family of designs for aspirated compressors[C]//IGTI ASME Turbo Expo,New York,USA,1998．
[15]
Gümmer V,Goller M,Swoboda M．Numerical investigation of end wall boundary layer removal on highly loaded axial compressor blade rows[J]．Journal of Turbomachinery,2008,130(1)：011015．
[16]
Wang S T,Qiang X X,Lin W C,et al．A study of parameter selection principle and internal flow mechanism in a multi-stage low-reaction axial flow compressor [C]//IGTI ASME Turbo Expo,Berlin,Germany,2008．
[17]
刘波,曹志远,魏巍,等．级环境下附面层抽吸对对转压气机性能的影响[J]．航空动力学报,2013,28(4)：885-892．Liu Bo,Cao Zhiyuan,Wei Wei,et al．Effects of boundary layer suction on counter-rotating compressor in multistage environment[J]．Journal of Aerospace Power,2013,28(4)：885-892(in Chinese)．
[18]
Knapke R D,Turner M G．Unsteady simulations of a counter-rotating aspirated compressor[C]//IGTI ASME Turbo Expo,Texas,USA,2013．
[19]
KR D,Turner M G．Unsteady Simulations of a Counter- rotating aspirated compressor[C]//IGTI ASME Turbo Expo,Texas,USA,2013．
[20]
羌晓青．低反动度附面层抽吸式压气机流动控制及设计方法研究[D]．哈尔滨：哈尔滨工业大学,2009．Qiang Xiaoqing．Study of flow control and design methods in low-reaction boundary layer suction compressors[D]．Harbin：Harbin Institute of Technology,2009(in Chinese)．
[21]
Ding J,Chen S,Xu H,et al．Control of flow separations in compressor cascade by boundary layer suction holes in suction surface[C]//IGTI ASME Turbo Expo,Texas,USA,2013．
[22]
Zhang L X,Chen S W,Xu H,et al．Effect of boundary layer suction on aerodynamic performance of high-turning compressor cascade[C]//IGTI ASME Turbo Expo,Texas,USA,2013．
[23]
Sarimurat M,Dang T Q．Shock management in diverging flow passages by blowing/suction,part 2：Applications [J]．Journal of Propulsion and Power,2012,28(6)：1230-1242．
[24]
陆华伟．轴向间隙对直、弯静叶轴流压气机时序效应影响的研究[D]．哈尔滨：哈尔滨工业大学,2008．Lu Huawei．Investigation of the influence of axial gap on the clocking effect in multi-stage axial compressor with straight/bowed stator blades[D]．Harbin：Harbin Institute of Technology,2008(in Chinese)．
[25]
Cornelius C,Biesinger T,Galpin P,et al．Experimental and computational analysis of a multistage axial compressor including stall prediction by steady and transient CFD methods[J]．Journal of Turbomachinery,2014,136(6)：061013．
