刘季江,蒋苏红．发电厂直接空冷系统的可行性探讨[J]．节能,2005(2)：372-377．Liu Jijiang,Jiang Suhong．The feasibility of direct air cooling system of power plant[J]．Energy Saving,2005(2)：372-377(in Chinese)．
[2]
杨立军,杜小泽,杨勇平,等．火电站直接空冷凝汽器性能考核评价方法[J]．中国电机工程学报,2007,27(2)：59-63．Yang Lijun,Du Xiaoze,Yang Yongping,et al．Performance evaluation for direct air-cooled steam condensers in power plant[J]．Proceedings of the CSEE,2007,27(2)：59-63(in Chinese)．
[3]
潘勇胜．直接空冷凝汽器清洗系统的分析和研究[J]．山西电力,2009(S1)：23-27．Pan Yongsheng．Analysis of air-cooled condenser cleaning system[J]．Shanxi Electric Power,2009(S1)：23-27(in Chinese)．
[4]
郭民臣,任德裴,李鹏．空冷凝汽器积灰对运行调节影响的计算分析[J]．中国电机工程学报,2012,32(11)：60-65．Guo Minchen,Ren Defei,Li Peng．Computational analysis of the influence of dust accumulation on operation and regulation of air-cooled steam condensers[J]．Proceedings of the CSEE,2012,32(11)：60-65(in Chinese)．
[5]
庄静伟,王强,史亮,等．高压水射流的发展与应用[J]．中国水运,2007,7(6)：124-125．Zhuang Jingwei,Wang Qiang,Shi Liang,et al．Development and application of high pressure water jet[J]．China Water Transport,2007,7(6)：124-125(in Chinese)．
[6]
赵波,杨善让,蒋静江,等．空冷凝汽器积灰干式吹扫系统现场实验研究[J]．中国电机工程学报,2013,33(35)：28-35．Zhao Bo,Yang Shanrang,Jiang Jingjiang,et al．A site simulation test on compressed air blowers for ash fouling of air cooled condensers[J]．Proceedings of the CSEE,2013,33(35)：28-35(in Chinese)．
[7]
李飞,史月涛,孙奉仲,等．H 型翅片椭圆管束传热及阻力特性的试验研究[J]．中国电机工程学报,2014,34(14)：2261-2266．Li Fei,Shi Yuetao,Sun Fengzhong,et al．Experimental research on heat transfer and resistance characteristics of H-type finned elliptical tubes[J]．Proceedings of the CSEE,2014,34(14)：2261-2266(in Chinese)．
[8]
邵罡北,刘刚,李东,等．600 MW空冷岛高压水冲洗及经济性分析[J]．制冷空调与电力机械,2011(2)：95-98．Shao Gangbei,Liu Gang,Li Dong,et al．Economic analysis of high-pressure water washing for 600 MW air cooling island[J]．Refrigeration Air Conditioning & Electric Power Machinery,2011(2)：95-98(in Chinese)．
[9]
刘锋,肇群,孙震,等．直接空冷岛清洗装置的结构分析与优化[J]．机械设计与研究,2012,28(2)：100-105．Liu Feng,Zhao Qun,Sun Zhen,et al．Structural analysis and optimization of cleaning device for direct air-cooled island[J]．Machine Design and Research,2012,28(2)：100-105(in Chinese)．
[10]
王龙,窦保杰．基于Fluent的轧制吹扫喷嘴的数值模拟[J]．有色设备,2009(1)：13-16．Wang Long,Dou Baojie．Numerical simulation of purging nozzle for rolling based on Fluent[J]．Non-Ferrous Metallurgical Equipment,2009(1)：13-16(in Chinese)．
[11]
姚世勇,郭勇,姜楠．轴对称湍射流冲击平板的实验研究[C]//第九届全国实验流体力学学术会议,杭州,2013．Yao Shiyong,Guo yong,Jiang nan．Experimental investigation of an axisymmetric turbulent jet impinging on a flat surface[C]//The Ninth National Conference on Experimental Fluid Mechanics,Hangzhou,2013(in Chinese)．
[12]
张师帅．计算流体动力学及其应用[M]．武汉：华中科技大学出版社,2011：82-239．Zhang Shishuai．Computional Fluid Dynamics and Application[M]．Huazhong University of Science and Technology Press,Wuhan,2011：82-239 (in Chinese)．
[13]
于洪,陆庭侃．高压水射流切割喷嘴的结构设计和参数优化数值模拟研究[J]．机床与液压,2009,37(11)：90-93．Yu Hong,Lu Tingkan．Numerical simulation study on structure design and parameters optimization of high pressure water jet cutting nozzle[J]．Machine Tool & Hydraulics,2009,37(11)：90-93(in Chinese)．
[14]
王乐勤,林思达,田艳丽,等．基于CFD的大流量喷嘴喷射性能研究[J]．流体机械,2008,26(11)：17-22．Wang Leqin,Lin Sida,Tian Yanli,et al．Study on great flow nozzle performance with CFD method[J]．Fluid Machinery,2008,26(11)：17-22(in Chinese)．
[15]
何立明,赵罡,程邦勤．气体动力学[M]．北京：国防工业出版社,2009：76-128．He Liming,Zhao Gang,Cheng Bangqin．Gas Dynamics[M]．National Defence Industry Press,Beijing,2009：76-128 (in Chinese)．
