Zhou Z, Khanniche M S,Igic P．A fast power loss calculation method for long real time thermal simulation of IGBT modules for a three-phase inverter system[C]// Proceedings of European Conference on Power Electronics and Applications (EPE)．Dresden：IEEE,2005：1-10．
[4]
潘武略,徐政,张静,等．电压源换流器型直流输电换流器损耗分析[J]．中国电机工程学报,2008,28(21)：7-14． Pan Wulue,Xu Zheng,Zhang Jing,et al ．Dissipation analysis of VSC-HVDC converter[J]．Proceedings of the CSEE,2008,28(21)：7-14(in Chinese)．
[5]
Drofenik U,Kolar J W．A general scheme for calculating switching-and conduction-losses of power semiconductors in numerical circuit simulations of power electronic systems[C]//Proceedings of the International Power Electronics Conference．Niigata：IEEE,2005：1-7．
[6]
Varga R S. Matrix iterative analysis[M]．New York：Springer,2000：63-68．
[7]
Waleri Brekel,Thomas Duetemeyer,Gunnar Puk,et al．Time resolved In Situ Tvj measurements of 6.5kV IGBT during inverter operation[C]//Proceedings of the Power Conversion and Intelligent Motion (PCIM)．Nuremberg：the Power Conversion Intelligent Motion association,2009：1-6．
Dun laoghaire harbor company．Mission profiles of wind speed[EB/OL]．Dublin：Dun laoghaire harbor company 2012[2012-12-. http://www.dlharbour.ie/．
[10]
Tavner P J,Spinato F,van Bussel G J W．Reliability of different wind turbine concepts with relevance to offshore application[C]//Proceedings of the European Wind Energy Conference．Brussels：the European Wind Energy Association,2008：1-9．
[11]
Tavner P J,Gindele R,Faulstich S,et al．Study of effects of weather & location on wind turbine failure rates[C]// Proceedings of the European Wind Energy Conference．Poland：the European Wind Energy Association,2010：1-8．
[12]
Busca C,Teodorescu R,Blaabjerg F,et al．An overview of the reliability prediction related aspects of high power IGBTs in wind power applications[J]．Microelectronics Reliability,2011,51(9)：1903-1907．
[13]
Vanessa Smet, Francois Forest,Jean-Jacques Huselstein,et al．Ageing and failure modes of IGBT modules in high- temperature power cycling[J]．IEEE Trans. on Industrial Electronics,2011,58(10)：4931-4941．
[14]
D'Arco S,Undeland T M,Bohllander M,et al．A simplified algorithm for predicting power cycling lifetime in Direct Drive wind power systems[C]//Proceedings of the IEEE 9th International Multi-Conference on Systems, Signals and Devices (SSD)．Chemnitz：IEEE,2012：1-6．
[15]
Ma K, Liserre M, Blaabjerg F． Lifetime estimation for the power semiconductors considering mission profiles in wind power converter[C]//Proceedings of the 15th Annual IEEE Energy Conversion Congress and Exposition (ECCE)．Denver：IEEE,2013：2962-2971．
[16]
Xie Kaigui,Jiang Zefu,Li Wenyuan．Effect of wind speed on wind turbine power converter reliability[J]．IEEE Trans. on Energy Conversion,2012,27(1)：96-104．
[17]
杨珍贵,周雒维,杜雄,等．基于器件的结温变化评估风机中参数差异对网侧变流器可靠性的影响[J]．中国电机工程学报,2013,33(30)：41-49． Yang Zhengui,Zhou Luowei,Du Xiong,et al．The effects of different parameters on reliability of grid side converters based on varied junction temperature in wind turbine devices[J]．Proceedings of the CSEE,2013,33(30)：41-49(in Chinese)．
[18]
周雒维,吴军科,杜雄,等．功率变流器的可靠性研究现状及展望[J]．电源学报,2013,1(1)：1-15． Zhou Luowei,Wu Junke,Du Xiong,et al．Status and outlook of power converter’s reliability research [J]．Journal of Power Supply,2013,1(1)：1-15(in Chinese)．
[19]
Pittini R,D'Arco S,Hernes M,et al. Thermal stress analysis of IGBT modules in VSCs for PMSG in large offshore wind energy conversion systems[C]//Proceedings of the 14th European Conference on Power Electronics and Applications (EPE)．Birmingham：IEEE,2011：1-10．
[20]
Huang Hui, Bryant A T, Mawby P A．Electro-thermal modelling of three phase inverter[C]//Proceedings of the 14th European Conference on Power Electronics and Applications (EPE)．Birmingham：IEEE,2011：1-7．
[21]
Johannes V G,Claus J F,Harald K,et al．A fast inverter model for electro-thermal simulation[C]//Proceedings of the 27th IEEE Applied Power Electronics Conference and Exposition (APEC)．Orlando：IEEE,2012：1-8．
[22]
Zhou Z,Kanniche M S,Butcup S G,et al．High-speed electro-thermal simulation model of inverter power modules for hybrid vehicles[J]．IET Electric Power Applications,2011,5(8)：636-643．
[23]
Ahmed M M R,Putrus G A．A method for predicting IGBT junction temperature under transient condition [C]//Proceedings of the Annual Conference of the IEEE Industrial Electronics Society(IECON)．Orlando：IEEE,2008：1-6．
[24]
Ma K,Blaabjerg F．Reliability-cost models for the power switching devices of wind power converters[C]// Proceedings of the 3th IEEE Conference on Power Electronics for Distributed Generation Systems (PEDG)．Aalborg：IEEE,2012：820-827．
Laprade A,Randall R H．Application Note AN-7520：numerical method for evaluating IGBT losses [EB/OL]．South Portland：Fairchild Semiconductor Corporation,2002[2014-11-．https://www.fairchildsemi.com/．
[27]
Yu Y,Lee T Y T,Chiriac V A．Compact thermal resistor-capacitor-network approach to predicting transient junction temperatures of a power amplifier module [J]．IEEE Trans. on Components,Packaging and Manufacturing Technology,2012,2(7)：1172-1181．
[28]
Azoui T,Tounsi P,Pasquet G,et al．Dynamic compact thermal model for electrothermal modeling and design optimization of automotive power devices[C]//Thermal,Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems．Linz：IEEE,2011：1-6．
[29]
Josef Lutz, Heinrich Schlangenotto, Uwe Scheuermann, et al. Semiconductor power devices[M]．New York：IEEE Press,2011：360-368．
