汪先兵,林鹤云,房淑华,等．永磁接触器位移分段PWM控制及吸合过程动态特性分析[J]．中国电机工程学报,2010,30(3)：113-118．Wang Xianbing,Lin Heyun,Fang Shuhua,et al．Analysis of displacement subsection PWM control and dynamic characteristic for closing process of permanent magnet contactor[J]．Proceedings of the CSEE,2010,30(3)：113-118(in Chinese)．
[2]
许志红,张培铭．智能交流接触器动态吸合过程研究[J]．中国电机工程学报,2007,27(18)：108-113．Xu Zhihong,Zhang Peimin．Research on dynamic closing course of intelligent AC contactor[J]．Proceedings of the CSEE,2007,27(18)：108-113(in Chinese)．
[3]
许志红,张培铭．基于蚁群算法的智能交流接触器优化设计[J]．电工电能新技术,2005,27(3)：9-12．Xu Zhihong,Zhang Peiming．Optimal design of intelligent AC contactors based on ant colony algorithm[J]．Advanced Technology of Electrical Engineering and Energy,2005,27(3)：9-12(in Chinese)．
[4]
汤龙飞,许志红．交流接触器新型智能抗电压跌落控制模块的设计[J]．中国电机工程学报,2012,32(27)：95-103．Tang Longfei,Xu Zhihong．Design of a new intelligent anti-voltage sag control module for AC contactors[J]．Proceedings of the CSEE,2012,32(27)：95-103(in Chinese)．
[5]
刘颖异,陈德桂,纽春萍,等．带电压反馈的智能接触器动态特性及触头弹跳的仿真与研究[J]．中国电机工程学报,2007,27(30)：20-25．Liu Yingyi,Chen Degui,Niu Chunping,et al．Analysis and simulation of dynamic behavior and contact bounce for an intelligent contactor with feedback mechanism[J]．Proceedings of the CSEE,2007,27(30)：20-25(in Chinese)．
[6]
刘颖异,陈德桂,袁海文,等．带电流反馈的永磁接触器动态特性仿真与分析[J]．中国电机工程学报,2010,30(15)：118-124．Liu Yingyi,Chen Degui,Yuan Haiwen,et al．Simulation and analysis on dynamic characteristics of permanent magnetic contactor with current feedback[J]．Proceedings of the CSEE,2010,30(15)：118-124(in Chinese)．
[7]
汪先兵,林鹤云,房淑华,等．无位置传感器的智能永磁接触器弱磁控制及合闸动态特性分析[J]．中国电机工程学报,2011,31(18)：93-99．Wang Xianbing,Lin Heyun,Fang Shuhua,et al．Analysis of flux-weakening control and dynamic characteristic for making process of sensorless intelligent permanent magnet contactor[J]．Proceedings of the CSEE,2011,31(18)：93-99(in Chinese)．
[8]
汤龙飞,许志红．闭环斩波起动交流接触器控制模块设计[J]．中国电机工程学报,2013,33(18)：132-139．Tang Longfei,Xu Zhihong．Design of an AC contactor control module started by closed loop chopping[J]．Proceedings of the CSEE,2013,33(18)：132-139(in Chinese)．
[9]
Antonio G E,Jordi-Roger R R,Xavier A M．A sensorless method for controlling the closure of a contactor[J]．IEEE Transactions on Magnetics,2007,43(10)：3896-3903．
[10]
陈德为,张培铭．基于人工鱼群算法的智能交流接触器虚拟样机优化设计[J]．电工技术学报,2011,26(2)：101-107．Chen Dewei,Zhang Peiming．Virtual prototype optimal design of intelligent AC contactors based on artificial fish-swarm algorithm[J]．Transactions of China Electrotechnical Society,2011,26(2)：101-107(in Chinese)．
[11]
鲍光海,张培铭．智能交流接触器零电流分断技术[J]．电工技术学报,2012,27(5)：199-204．Bao Guanghai,Zhang Peiming．Technology of zero-current breaking of intelligent AC contactor[J]．Transactions of China Electrotechnical Society,2012,27(5)：199-204(in Chinese)．
[12]
许志红,张培铭．智能交流接触器全过程动态优化设计[J]．中国电机工程学报,2005,25(17)：156-161．Xu Zhihong,Zhang Peiming．Dynamic optimal design of intelligent AC contactor in the whole course[J]．Proceedings of the CSEE,2005,25(17)：156-161(in Chinese)．
[13]
卢伟国,周雒维,罗全明,等．电压模式Buck变换器的分岔控制[J]．电工技术学报,2009,24(4)：133-138．Lu Weiguo,Zhou Luowei,Luo Quanming,et al．Control of bifurcation in the voltage-mode buck converter[J]．Transactions of China Electrotechnical Society,2009,24(4)：133-138(in Chinese)．
[14]
解光军,徐慧芳．峰值电流模式控制非理想Buck变换器系统建模[J]．中国电机工程学报,2012,32(24)：52-58．Xie Guangjun,Xu Huifang．Modeling of current programmed mode non-ideal buck converter systems[J]．Proceedings of the CSEE,2012,32(24)：52-58(in Chinese)．
[15]
林维明,郭晓君,黄超,等．改进单周期控制策略的双向大变比DC-DC开关变换器[J]．中国电机工程学报,2012,32(21)：31-37．Lin Weiming,Guo Xiaojun,Hang Chao．Bi-directional DC-DC converters with large conversion ratio based on improved one-cycle control[J]．Proceedings of the CSEE,2012,32(21)：31-37(in Chinese)．
[16]
Sanjaya Maniktala．Switching power supplies A to Z[M]．王志强译．北京：人民邮电出版社,2008：194-208．
[17]
Christophe P B．Switch-mode power supplies spice simulations and practical designs[M]．吕章德译．北京：电子工业出版社,2009：196-223．
[18]
刘帼巾,陆俭国,苏秀苹,等．神经网络法优化接触器电磁系统[J]．电工技术学报,2007,22(1)：62-66．Liu Guojin,Lu Jianguo,Su Xiuping,et al．Optimization of the electromagnetic system of contactor by neural network[J]．Transactions of China Electrotechnical Society,2007,22(1)：62-66(in Chinese)．
[19]
全嘉青,赵轶磊．断路器初压力及合闸弹跳的仿真分析计算[J]．低压电器,2010(11)：7-9．Quan Jiaqing,Zhao Yilei．Simulation analysis and calculation on initial pressure and close-bouncing of circuit breaker[J]．Low Voltage Apparatus,2010(11)：7-9(in Chinese)．
[20]
Hung C Y,Chi C T．A new compensation strategy for an ac contactor under voltage-sag events[C]//2010 IEEE Conference on Robotics,Automation and Mechatronics．Singapore：IEEE,2010：52-57．
[21]
刘帼巾,陆俭国,王海涛,等．接触器式继电器的失效分析[J]．电工技术学报,2011,26(1)：81-85．Liu Guojin,Lu Jianguo,Wang Haitao,et al．Failure analysis of contactor relay[J]．Transactions of China Electrotechnical Society,2011,26(1)：81-85(in Chinese)．
[22]
李兴文,陈德桂,孙志强,等．交流接触器动态过程及触头弹跳的数值分析与实验研究[J]．中国电机工程学报,2004,24(9)：229-233．Li Xingwen,Chen Degui,Sun Zhiqiang,et al．Numerial analysis and experimental investigation of dynamic behavior and contact bounce of AC contactor[J]．Proceedings of the CSEE,2004,24(9)：229-233(in Chinese)．
