关醒凡．现代泵理论与设计[M]．北京：宇航出版社,2010：729-735． Guan Xingfan．The theory and design of modern pump [M]．Beijing：China Astronautic Publishing House,2010：729-735(in Chinese)．
[2]
秦武,李志鹏,沈宗沼,等．核反应堆冷却剂循环泵的现状及发展[J]．水泵技术,2007(3)：1-6． Qin Wu,Li Zhipeng,Shen Zongzhao,et a1．Actuality and development of the nuclear reactor coolant pump[J]．Pump Technology,2007(3)：1-6(in Chinese)．
[3]
Knierim C,Baumgarten S,Fritz J,et al．Design process for an advanced reactor coolant pump for a 1 400 MW nuclear power plant[C]//Proceeding of FEDSM2005：2005ASME Fluids Engineering Divisions Summer Meeting and Exhibition,Houston,TX,USA,2005．
[4]
朱荣生,郑宝义,李小龙,等．1000 MW 级核主泵内部非定常流动特性[J]．热能动力工程,2012,27(3)：377-382． Zhu Rongsheng,Zheng Baoyi,Li Xiaolong,et a1．Study on unsteady flow characteristics of 1000 MW nuclear reactor coolant pump[J]．Journal of Engineering for Thermal Energy and Power,2012,27(3)：377-382(in Chinese)．
[5]
王春林,易同祥,吴志旺,等．混流式核主泵非定常流场的压力脉动特性分析[J]．动力工程,2009,30(11)：1036-1040． Wang Chunlin,Yi Tongxiang,Wu Zhiwang,et al．Analysis on pressure fluctuations of unsteady flow field in mixed-flow main coolant pump[J]．Journal of Power Engineering,2009,30(11)：1036-1040(in Chinese)．
[6]
朱荣生,李小龙,袁寿其,等．反应堆主泵压水室出口收缩角对水力性能的影响[J]．核动力工程,2011,33(2)：97-102． Zhu Rongsheng,Li Xiaolong,Yuan Shouqi,et al．Effect of pumping chamber outlet contraction angle on hydraulic performance of main nuclear reactor pump[J]．Nuclear Power Engineering,2011,33(2)：97-102(in Chinese)．
[7]
朱荣生,习毅,袁寿其,等．气液两相流条件下核主泵导叶出口边安放位置[J]．排灌机械工程学报,2013,31(6)：484-489． Zhu Rongsheng,Xi Yi,Yuan Shouqi,et a1．Position of guide vane trailing edge of nuclear reactor coolant pump under gas-liquid two phase condition[J]．Journal of Drainage and Irrigation Machinery Engineering,2013,31(6)：484-489(in Chinese)．
[8]
张栋俊,徐士鸣．球形压水室扩散管位置对核主泵性能的影响[J]．流体机械,2010,38(5)：13-17． Zhang Dongjun,Xu Shiming．Influence of orbicular pumping chamber difusion tube position on nuclear first-loop coolant pump performance[J]．Fluid Machinery,2010,38(5)：13-17(in Chinese)．
[9]
张野,王晓放,介红恩．压水堆冷却剂中硼酸浓度对核主泵性能影响研究[J]．核动力工程,2011,32(4)：95-98． Zhang Ye,Wang Xiaofang,Jie Hongen．Effect of boric acid concentration on reactor coolant pump performance in PWRs[J]．Nuclear Power Engineering,2011,32(4)：95-98(in Chinese)．
[10]
王春林,彭娜,赵佰通,等．核主泵模型泵导叶进口边相对位置对泵性能的影响[J]．排灌机械,2008,26(5)：38-41． Wang Chunlin,Peng Na,Zhao Baitong,et a1．Influence of relative position of difuser inlet edge on performance of nuclear model pump[J]．Drainage and Irrigation Machinery,2008,26(5)：38-41(in Chinese)．
[11]
秦杰,徐士鸣．导叶结构对核主泵性能的影响[J]．发电设备,2010,24(5)：315-318． Qin Jie,Xu Shiming．Influence of guide vane structure on performance of reactor coolant pumps[J]．Power Equipment,2010,24(5)：315-318(in Chinese)．
[12]
朱荣生,郑宝义,王秀礼,等．1000MWe核反应堆冷却剂泵多场耦合特性分析[J]．原子能科学技术,2013,47(5)：784-788． Zhu Rongsheng,Zheng Baoyi,Wang Xiuli,et al．Multiple field coupling analysis of performance in coolant pump of 1000 MWe reactor[J]．Atomic Energy Science and Technology,2013,47(5)：784-788(in Chinese)．
[13]
李颖,周文霞,张继革,等．核反应堆冷却剂循环泵全流道三维数值模拟及性能预估[J]．原子能科学技术,2009,43(10)：898-902． Li Ying,Zhou Wenxia,Zhang Jige,et al．Numerical simulation of three-dimensional flow through fluu passage and performance prediction of nuclear reactor coolant pump[J]．Atomic Energy Science and Technology,2009,43(10)：898-902(in Chinese)．
[14]
付强,袁寿其,朱荣生,等．失水事故工况下核主泵气液两相瞬态流动特性[J]．华中科技大学学报：自然科学版,2013,41(9)：112-116． Fu Qiang,Yuan Shouqi,Zhu Rongsheng,et al．Transient gas-liquid two-phase flow characteristics of nuclear main pump under loss of coolant accident[J]．Journal of Hua- zhong University of Science and Technology：Natural Science Edition,2013,41(9)：112-116(in Chinese)．
[15]
王秀礼,袁寿其,朱荣生,等．核主泵停机过渡过程瞬态水动力特性研究[J]．原子能科学技术,2013,47(3)：364-370． Wang Xiuli,Yuan Shouqi,Zhu Rongsheng,et al．Transient hydraulic characteristic study on nuclear reactor coolant pump during stoping period[J]．Atomic Energy Science and Technology,2013,47(3)：364-370(in Chinese)．
[16]
王秀礼,袁寿其,朱荣生,等．核主泵变流量过渡过程瞬态水动力特性研究[J]．原子能科学技术,2013,47(7)：1169-1174． Wang Xiuli,Yuan Shouqi,Zhu Rongsheng,et al．Transient hydraulic characteristic study on nuclear reactor coolant pump during stoping period[J]．Atomic Energy Science and Technology,2013,47(7)：1169-1174(in Chinese)．
[17]
魏清顺,刘在伦．导流器叶片进口安放角对潜水泵性能 的影响[J]．中国电机工程学报,2012,32(14)：109-115． Wei Qingshun,Liu Zailun．Effects of inlet setting angles of space guide vanes on submersible pump performances[J]．Proceedings of the CSEE,2012,32(14)：109-115(in Chinese)．
[18]
Gaetani P,Persico G,Mora A,et al．Impeller-vaned diffuser interaction in a centrifugal compressor at off design conditons[J]．Journal of Turbomachinery,2010,134(061034)：1-9．
[19]
魏清顺,刘在伦．基于CFD 的离心泵浮动叶轮平衡腔压力数值分析与验证[J]．中国电机工程学报,2011,31(14)：103-108． Wei Qingshun,Liu Zailun．Numerical analysis and validation of floating impeller balance chamber pressure in centrifugal pump based on CFD[J]．Proceedings of the CSEE,2011,31(14)：103-108(in Chinese)．
[20]
高闯,谷传纲,王彤,等．叶轮和扩压器几何参数对离心压缩机末级性能和失速的影响[J]．中国电机工程学报,2007,27(32)：83-86． Gao Chuang,Gu Chuangang,Wang Tong,et al．Effects of impellers and diffusers’ geometries on performance and rotating[J]．Proceedings of the CSEE,2007,27(32)：83-86(in Chinese)．
