李铁,吴晅,袁竹林．气化炉激冷室下降管内气液两相热质同时传递过程数值研究[J]．中国电机工程学报,2008,28(26)：35-39．Li Tie,Wu Xuan,Yuan Zhulin．Numerical investigation of gas-liquid heat and mass concurrent transfer process in vertical pipe in gasifier quenching chamber [J]．Proceedings of the CSEE,2008,28(26)：35-39(in Chinese)．
[2]
李铁,李伟力,袁竹林．用不同辐射模型研究下降管内传热传质特性[J]. 中国电机工程学报,2007,27(2)：92-98．Li Tie,Li Weili,Yuan Zhulin．Different radiative models for heat and mass transfer characteristics in vertical pipe[J]．Proceedings of the CSEE,2007,27(2)：92-98(in Chinese)．
[3]
王亦飞,卢瑞华,苏宜丰,等．新型水煤浆气化炉内洗涤冷却管的温度分布[J]．华东理工大学学报,2006,32(3)：300-304．Wang Yifei,Lu Ruihua,Su Yifeng,et al．Temperature distribution in the scrubbing-cooling tube of the new type coal slurry gasifier[J]．Journal of East China University and Technology,2006,32(3)：300-304(in Chinese)．
[4]
王亦飞,于广锁,龚欣,等．高温气体洗涤冷却装置．CN201320096192.1[P]．2013-08-21．Wang Yifei,Yu Guangsuo,Gongxin,et al．A device for scrubbing and quenching the high-temperature syngas．5 CN201320096192.1[P]．2013-08-21(in Chinese) ．
[5]
张杰,郭庆华,周志杰,等．多喷嘴对置式水煤浆气化炉内颗粒物分布特性的实验研究[J]．中国电机工程学报,2013,33(20)：59-65．Zhang Jie,Guo Qinghua,Zhou Zhijie,et al．Experimental study of particle distribution in bench-cale opposed multi-burner gasifiers of coal water slurry[J]．Proceedings of the CSEE,2013,33(20)：59-65(in Chinese)．
[6]
王振平,曹建明,郭广祥,等．柴油雾化特性的定量研究[J]．柴油机设计与制造,2012,2(18)：9-11．Wang Zhenping,Cao Jianming,Guo Guangxiang,et al．Quantitative study on spray characteristics of diesel fuel[J]．Design & Manufacture of Diesel Engine,2012,2(18)：9-11(in Chinese)．
[7]
Inthavong K,Yang W,Fung M C,Tu J Y．External and near-nozzle spray characteristics of a continuous spray atomized from a nasal spray device[J]．Aerosol Science and Technology,2012,46(2)：165 -177．
[8]
Santangelo P E．Characterization high-pressure water-mist sprays：Experimental analysis of droplet size and dispersion[J]．Experimental Thermal and Fluid Science,2010,34(8)：1353-1366．
[9]
Lan Z K,Zhu D H,Tian W X,et al．Experimental study on spray characteristics of pressure-swirl nozzles in pressurizer[J]．Annals of Nuclear Energy,2014,63：215-227．
[10]
王永堂,吴少华,陈明,等．旋流式气液同轴式喷油器在加压空间中雾化特性的试验研究[J]中国电机工程学报,2011,31(35)：110-116．Wang Yongtang,Wu Shaohua,Chen Ming,et al．Experimental study on atomization characteristics of gas/liquid coaxial swirling nozzle in pressurized space [J]．Proceedings of the CSEE,2011,31(35)：110-116(in Chinese)．
[11]
Bafekr S H,Shams M,Ebrahimi R,et al．Numerical simulation of pressure-swirl spray dispersion by using eulerian-lagrangian Method[J]．Journal of Dispersion Science and Technology,2011,32(1)：47-55．
[12]
Renze P,Heinen K,Schonherr M．Experimental and numerical investigation of pressure swirl atomizers [J]．Chemical Engineering Technology,2011,34(7)：1191-1198．
[13]
Zhang H B,Bai B F,Li Liu L,et al．Droplet dispersion characteristics of the hollow cone sprays in crossflow [J]．Experimental Thermal and Fluid Science,2013,45：25-33．
[14]
Zhang H B,Bai B F,Liu L,et al．Experimental study of the mixing of two impinging pressure-swirl sprays in crossflow[J]．Experimental Thermal and Fluid Science,2013,49：67-74．
[15]
Santolaya J L,Garcia J A,Calvo E,et al．Effects of droplet collision phenomena on the development of pressure swirl sprays[J]．International Journal of Multiphase Flow,2013,56：160-171．
[16]
Lynch A,Batchelor R G,Kiel B,et al．Spray characteristics of a pressure-swirl fuel injector subjected to a crossflow and a Coflow[J]．Atomization and Sprays,2011,21(8)：625-643．
[17]
Zheng Y H,Marshall A W．Characterization of the initial spray from low-weber-number jets in crossflow [J]．Atomization and Sprays,2011,21(7)：575-589．
[18]
Rana S,Herrmann M．Primary atomization of a liquid jet in crossflow[J]．Physics of Fluids,2011,23(9) ：91-109．
[19]
尹柯,王亦飞,刘海峰,等．喷雾激冷室喷嘴特性及喷嘴选型[J]．华东理工大学学报,2011,37(2)：156-162．Yin Ke,Wang Yifei,Liu Haifeng,et al．Atomization characteristics of nozzles for spray-quench chamber and optimization of nozzles[J]．Journal of East China University and Technology,2011,37(2)：156-162(in Chinese)．
[20]
Saha A,Lee J D,Basu S,et al．Breakup and coalescence characteristics of a hollow cone swirling spray[J]．Physics of Fluids,2012,24(12)：1-20．
[21]
Santangelo P E．Experiments and modeling of discharge characteristics in water-mist sprays generated by pressure- swirl atomizers[J]．Journal of Thermal Science,2012,21(6)：539-548．
[22]
尹柯．喷雾激冷室气液两相流动特性冷态研究[D].上海：华东理工大学,2010．Yin ke．The cold model study on gas-liquid two phase flow character of spray quench chamber[D]．Shanghai：Eeast China University of Science and Technology,2010(in Chinese)．
[23]
Terfous A,Hazzab A,Ghenaim A．Predicting the drag coefficient and settling velocity of spherical particles [J]．Powder Technology,2013,239：12-20．
[24]
李万明,郭建政,赵亚楠,等．钢液中非金属夹杂物极限上浮速度的计算[J]．一重技术,2013,26(6)：31-34．Li Wanming,Guo Jianzhen,Zhao Yanan,et al． Calculation of rising limit speed of non-metallic inclusion in molten steel[J]．CFHI Technology,2013,26(6)：31-34(in Chinese)．
[25]
陈敏恒,从德滋,方图南,等．化工原理(上)[M].北京：化学工业出版社,2006：147．Chen minheng,Cong Dezi,Fang tunan,et al．Chemical engineering principles[M]．Beijing：Chemical Industry Press,2006：147(in Chinese)．
