Kundur P,Paserba J,Ajjarapu V,et al．Definition and classification of power system stability IEEE/CIGRE joint task on stability terms and definitions[J]．IEEE Trans. on Power System,2004,19(3)：1387-1401．
[2]
Bidram A,Hamedani-golshan M,Davoudi A．Capacitor design considering first swing stability of distributed generations[J]．IEEE Trans. on Power System,2012,27(4)：1941-1948．
[3]
Haque M H．Application of energy function to assess the first swing stability of a power system with a SVC[J]．IEE Proceedings—Generator Transmission and Distribution,2005,152(6)：806-812．
[4]
Haque M H．Improvement of first swing stability limit by utilizing full benefit of shunt FACTS devices[J]．IEEE Trans. on Energy Conversion,2004,19(4)：1894-1902．
[5]
Delfino B,Denegri G B,Invernizzi M,et al．Estimating first swing stability of synchronous machines as affected by saturation and controls[J]．IEEE Trans. on Energy Conversion,1988,3(3)：636-646．
[6]
Haque M H．Evaluation of first swing stability of a large power system with various FACTS devices[J]．IEEE Trans. on Power System,2008,23(3)：1144-1151．
[7]
Hiramatsu D,Tokumasu T,Fujita M,et al．A study on rotor surface losses in small to medium cylindrical synchronous machine[J]．IEEE Trans. on Energy Conversion,2012,27(4)：813-821．
[8]
S?as?ic? M,Lloyd B,Elez A．Finite element analysis of turbine generator rotor winding shorted turns[J]．IEEE Trans. on Energy Conversion,2012,27(4)：930-937．
[9]
Ibrahim M,Pillay P．Core loss prediction in electrical machine laminations considering skin effect and minor hysteresis loops[J]．IEEE Trans. on Industry Application,2013,PP(99)：2681-2686．
[10]
Arjona L M A,Macdonald D C．A new lumped steady state synchronous machine model derived from finite element analysis[J]．IEEE Trans. on Energy Conversion,1999,14(1)：1-7．
[11]
Liang Xiaodong,El-Serafi A M,Faried S O．Application of the finite element method for the determination of the parameters representing the cross magnetizing in saturated synchronous machines[J]．IEEE Trans. on Energy Conversion,2010,25(1)：71-79．
[12]
Nabeta S I,Foggia A．Finite element analysis of the skin-effect in damper bars of a synchronous machine[J]．IEEE Trans. on Magnetics,1997,33(2)：2065-2069．
[13]
Vetter W,Reichert K．Determination of damper winding and rotor iron currents in converter and line fed synchronous machines[J]．IEEE Trans. on Energy Conversion,1994,9(4)：709-716．
[14]
胡笳．系统扰动条件下同步发电机运行行为的时步有限元研究[D]．北京：华北电力大学,2010． Hu Jia．Research on operation behavior of synchronous generator under system disturbance conditions with time-stepping finite element method[D]．Beijing：North China Electric Power University,2010(in Chinese)．
[15]
Lidenholm J,Lundin U．Estimation of hydropower generator parameters through field simulations of standard tests[J]．IEEE Trans. on Energy Conversion,2010,25(4)：931-939．
[16]
哈尔滨大电机研究所．GB/T 7409.3—2007同步电机励磁系统——大、中型同步发电机励磁系统技术要求[S]．北京：中国标准出版社,2007． Harbin Institute of Large Electrical Machinery．GB/T 7409.3—2007 Excitation system for synchronous electrical machines-Technical requirements of excitation system for large and medium synchronous generators[S]．Beijing：China Zhijian Publishing House,2007(in Chinese)．
[17]
Kundur P．Power system stability and control[M]．New York：McGraw-Hill Inc,1994：170-173．
[18]
马志云．电机瞬态分析[M]．北京：中国电力出版社,1998：61-67． Ma Zhiyun．Transient analysis of electric machine[M]．Beijing：China Electric Power Press,1998：61-67(in Chinese)．
[19]
许国瑞,王红宇,刘晓芳,等．同步发电机不同实用模型的大扰动特性的对比研究[J]．中国电机工程学报,2012,32(24)：67-73． Xu Guorui,Wang Hongyu,Liu Xiaofang,et al．Comparing research on large disturbance characteristics of the different generator practical models[J]．Proceedings of the CSEE,2012,32(24)：67-73(in Chinese)．
[20]
倪以信,陈寿孙,张宝霖．动态电力系统的理论和分析[M]．北京：清华大学出版社,2002：42-45． Ni Yixin,Chen Shousun,Zhang Baolin．Theory and analysis of dynamic power system[M]．Beijing：Tsinghua University Press,2002：42-45(in Chinese)．
