| [1] | 焦树建． 燃气-蒸汽联合循环[M]． 北京：机械工业出版社， 2004：107-108． Jiao Shujian．Gas-steam combined cycle[M]．Beijing：ChinaMachine Press，2004
|
| [2] | Hus K Y，Goss L P，Roqquemore W M． Characteristics of a trapped-vortex combustor[J]． Journal of Propulsion and Power， 1998，14(1)：57-65．
|
| [3] | Katta V R，Roqquemore W M． Study on trapped-vortex combustor-effect of injection on flow dynamics[J]． Journal of Propulsion and Power， 1998，14(3)：273-281．
|
| [4] | Hendricks R C，Shouse D T． Experimental and computational study of trapped vortex combustor sector rig with high-speed diffuser flow[J]． International Journal of Rotating Machinery， 2001，7(6)：375-385．
|
| [5] | Wu Hui，Chen Qin，Shao Weiwei，et al． Combustion of hydrogen in an experimental trapped vortex combustor[J]． Journal of Thermal Science， 2009，18（3）：256-261．
|
| [6] | 武辉． 凹腔驻涡燃烧器的实验与数值研究[D]． 北京：中国科学院工程热物理研究所， 2009．Wu Hui．Experimental and numerical study of trapped vortex combustor[D]．Beijing：Instituteof Engineering Thermophysics，Chinese Academy of Sciences，2009(in Chinese)．
|
| [7] | 李庆，潘余，谭建国，等． 压燃冲压发动机中凹腔与V槽火焰稳定器性能对比分析[J]． 航空动力学报， 2010，25(1)：35-40． Li Qing，Pan Yu，Tan Jianguo，et al．Comparison of characteristics of ramjet with cavity-based flame holder and V-gutter flame holder[J]．Journal of Aerospace Power，2010，25(1)
|
| [8] | 赵伶玲，周强泰． 复杂曲面花瓣燃烧器煤粉燃烧数值分析[J]． 中国电机工程学报， 2007，27(5)：39-44． Zhao Lingling，Zhou Qiangtai．Numerical analysis of the petal swirl burner with complex geometry configuration for pulverized coal[J]．Proceedings of the CSEE，2007，27(5)
|
| [9] | 赵伶玲，周强泰，赵长遂． 花瓣稳燃器回流区的特性分析[J]． 动力工程， 2006，26(3)：379-382． Zhao Lingling，Zhou Qiangtai，Zhao Changsui．Study of the recirculation zone of petal flame stabilizers[J]．Journal of Power Engineering，2006，26(3)
|
| [10] | 赵伶玲，周强泰，赵长遂． 花瓣稳燃器流场的数值模拟与特性分析[J]． 热能力工程， 2006，21(3)：264-266． Zhao Lingling，Zhou Qiangtai，Zhao Changsui．Numerical simulation and characteristic analysis of the flow fields in a petal-shaped combustion stabilizer[J]．Journal of Engineering for Thermal Energy and Power，2006，21(3)
|
| [11] | 赵伶玲，周强泰． 旋流燃烧器的稳燃性能分析[J]． 动力工程， 2005，25(3)：364-368． Zhao Lingling，Zhou Qiangtai．Analysis of combustion stability of swirl burner[J]．Power Engineering，2005，25(3)
|
| [12] | 赵伶玲，周强泰． 新型旋流燃烧器？？花瓣燃烧器的研究与应用[J]． 中国电力， 2005，38(11)：31-34． Zhao Lingling，Zhou Qiangtai．Research and application of petal flame stabilizer-a new type swirl burner[J]．Electric Power，2005，38(11)
|
| [13] | 赵伶玲． 花瓣燃烧器的稳燃性能与应用研究[D]． 南京：东南大学， 2005．Zhao Lingling．Study on flame stability and application for petal swirl burner[D]．Nanjing：SoutheastUniversity，2005(in Chinese)．
|
| [14] | 杨庆涛，杨帆，钟北京． 微小燃烧器燃烧特性研究[J]． 工程热物理学报， 2010，31(11)：1965-1968． Yang Qingtao，Yang Fan，Zhong Beijing．Study on characteristics of micro-combustor[J]．Journal of Engineering Thermophysics，2010，31(11)
|
| [15] | Philippe Versailles，Wajid Ali Chishty，Huu Duc Vo． Application of dielectric barrier discharge to improve the flashback limit of a lean premixed dump combustor[C]// Proceedings of ASME Turbo Expo 2011，GT 2011-45161，June 6-10, 2011 , Vancouver, British Columbia, Canada．
|
| [16] | Leonov S B，Dmitry A． Yarantsev，Campbell Carter． Transversal Electrical Discharge as a New Type of Flameholder[C]//15th AIAA International Space Planes and Hypersonic Systems and Technologies Conference， Dayton，Ohio，2008：2008-2675．
|
| [17] | Efimov B G，Ivanov V V，Inshakov S I，et al． Investigation of formation of a spatial position of longitudinal discharge in a supersonic flow by fitting the configuration of an anode under conditions of injection of propane and kerosene into the discharge zone[J]． High Temperature， 2010，49(4)：479-486．
|
| [18] | 李钢，邵卫卫，徐燕骥，等． 利用等离子体旋流器调控旋流扩散火焰[J]． 中国科学E辑：技术科学， 2011，41(8)：1084-1089． Li Gang，Shao Weiwei，Xu Yanji，et al．Swirl diffusion flame control by the plasma swirler[J]．Sci China Ser E-Tech Sci，2011，41(8)
|
