Huynh C，Zheng Liping，Acharya D． Losses in high speed permanent magnet machines used in microturbine applications[J]． Journal of Engineering for Gas Turbines and Power， 2009，131：022301 1-6．
[2]
Kolondzovski Z． Numerical modelling of the coolant flow in a high-speed electrical machine[C]//Internatio-nal Conference on Electrical Machines． Algarve， Portugal：IEEE，2008：787．
[3]
Jang S M，Cho H W，Choi S K． Design and analysis of a high-speed brushless DC motor for centrifugal compressor[J]． IEEE Trans. on Magnetics， 2007，43(6)：2573-2575．
[4]
Bruckner R J． Windage power loss in gas foil bearings and the rotor-stator clearance of high speed generators operating in high pressure environments[C]//Proceedings of the ASME Turbo Expo． Florida， USA：ASME，2009，2：263-270．
[5]
Riemer B，Lemann，M，Hameyer，K． Rotor design of a high-speed permanent magnet synchronous machine rating 100000 rpm at 10kW[C]//IEEE Energy Conversion Congress and Exposition． Atlanta， USA：IEEE，2010：3978-3985．
[6]
Kolondzovski Z，Arkkio A，Larjola J，et al． Power limits of high-speed permanent magnet electrical machines for compressor applications[J]． IEEE Trans. on Energy Conversion， 201 1，26(1)：73-82．
[7]
Binder A，Schneider T，Klohr M． Fixation of buried and surface-mounted magnets in high-speed permanent- magnet synchronous machines[J]． IEEE Trans. on Industry Applications， 2006，42(4)：1031-1037．
[8]
Walton J F，Tomaszewski M J，Heshmat C A，et al． On the development of an oil-free electric turbocharger for fuel cells[C]//Proceedings of the ASME Turbo Expo． Barcelona：ASME， 2006：395-400．
[9]
Agrawal G L，Buckley C W． Motor driven centrifugal compressor/blower：The United States，Us 7，063，519[P]． 2006-06-20．，
[10]
Masoudipour M M，Lotterman J A，Oximberg C A，et al． Thermal and secondary flow mangement of electrically driven compressor：The United States，US7，633，193[P]． 2009-12-15．，
[11]
Masoudipour M M，Duong L K． Electric motor cooling jacket：The United States，US 7，675，209[P]． 2010-03-09．，
[12]
王继强，王凤翔，鲍文博，等． 高速永磁电机转子设计与强度分析[J]． 中国电机工程学报， 2005，25(15)：140-145． Wang Jiqiang；Wang Fengxiang；Bao Wenbo，et al．Rotor design and strength analysis of high speed permanent magnet machine[J]．Proceedings of the CSEE，2005，25(15)
[13]
Borisavljevic A，Polinder H，Ferreira A． On the speed limits of permanent-magnet machines[J]． IEEE Trans. on Industrial Electronics， 2010，57(1)：220-226．
[14]
王伟奇． 高速永磁同步电机转子强度分析[D]． 西安：西安交通大学， 2008．Wang Weiqi．Strength analysis of rotor of high-speed pm synchronous motors[D]．Xi？an：Xi？an？an Jiaotong University，2008(in Chinese)．
[15]
Xiao J C，Xiao S H，Wu H． Design and strength analysis of ultra-high speed permanent magnet DC rotor[J]． Advanced Materials Research， 2011(188)：481-486．
