[1] | Acarnley P P,Watson J F. Position Detection of Brushless DC Motor Using Inductance Bridge System. IEEE Transactions on magnetics.2003, 39(5):3310-3312.
|
[2] | 李志强,夏长亮,陈炜. 基于线反电势的无刷直流电机无位置传感器控制[J]. 电工技术学报, 2010,25(7):38-44. Li Zhiqiang,Xia Changliang,Chen Wei.A Position sensorless control strategy for BLDCM based on line Back-EMF.Transactions of China Electrotechnical Society,2010,25(7)
|
[3] | Lai Y S,Lin Y K. A unified approach to back-EMF detection for brushless DC motor drives without current and hall sensors[J]. IEEE Transactions on Power Electronics, 2003,18(6):1293-1298.
|
[4] | 韦鲲,任军军,张仲超. 三次谐波检测无刷直流电机转子位置的研究[J]. 中国电机工程学报, 2004,24(5):163-167. Wei Kun,Ren Jun-jun,Zhang Zhong-chao.Research on the scheme of sensing rotor position of BLDCM based on third harmonic component.Proceedings of the CSEE,2004,24(5)
|
[5] | 周波,魏佳,穆新华,等. 反电势逻辑电平积分比较法实现的无刷直流电机无位置传感器控制[J]. 电工技术学报, 2000,15(4):5-9. Zhou Bo,Wei Jia,Mu Xinhua,et al.New method of indirect sensing for rotor flux position of a sensorless brushless DC motor[J].Transactions of China Electrotechnical Society,2000,15(4)
|
[6] | Ogasawara S,Akagi H. An approach to position sensorless methods for brushless DC motors[J]. IEEE Transactions on Industry Applications, 1991,27:928-933.
|
[7] | Wang L M,Lorenz R D. Rotor position estimation for permanent magnet synchronous motor using saliency- tracking self-sensing method[C]//Proceedings of IEEE 35th IAS Annual Meeting,Italy,Rome,2000:445-450.
|
[8] | Scaglione O,Markovic M,Perriard,Y. Exploitation of iron B-H local hysteresis for the rotor position detection of a PM motor[C]//International Electric Machines and Drives Conference,IEMDC,Miami,2009:1641 - 1646.
|
[9] | Scaglione O,Markovic M,Perriard Y. PM motor sensorless position detection based on iron B-H local hysteresis[C]//International Conference on Electrical Machines and Systems,2009:1-6.
|
[10] | Park J Y,Lieu D K. Position Detection of Brushless DC Motor Using Inductance Bridge System. IEEE Transactions on magnetics, 2003,39(5):3310-3312.
|
[11] | Gambetta D,Ahfock A. New sensorless commutation technique for brushless DC motors[J]. IET Electric Power Applications, 2009,3(1):40-49.
|
[12] | 王晋,陶桂林,周理兵,等. 基于换相过程分析的无刷直流电动机机械特性的研究[J]. 中国电机工程学报, 2005,25(14):141-145. Wang jin,Tao Guilin,Zhou Libing,et al.Research on the mechanical characteristic of brushless DC motors based on the analysis of phase commutation[J].Proceedings of the CSEE,2005,25(14)
|
[13] | Champa P,Somsiri P,Wipasuramonton P,et al. Initial Rotor Position Estimation for Sensorless Brushless DC Drives[J]. IEEE Transactions on Industry Applications, 2009,45(4):1318 -1324.
|
[14] | Somsiri P,Champa P,Wipasuramonton P,et al. Voltage Injection Based Initial Rotor Position Estimation Method for Three-Phase Star-Connected Switched Reluctance Machines[C]//International Conference on Power Electronics and Drive Systems. Bangkok, Thailand,2007:494-500.
|
[15] | Ahfock A,Gambetta D. Sensorless commutation of printed circuit brushless direct current motors[J]. IET Electric Power Applications, 2010,4(6):397-406.
|
[16] | 王华斌,刘和平,张毅,等. 计及中性点电压的无刷直流电机无位置传感器控制[J]. 电工技术学报, 2009,24(7):46-54. Wang Huabin,Liu Heping,Zhang yi,et al.Sensorless BLDC drive allowing for neutral point voltage[J].Transactions of China Electrotechnical Society,2009,24(7)
|
[17] | 任雷,崔芮华,王宗培,等. 永磁同步电机绕组电感的饱和效应[J]. 电工技术学报, 2000,15(1):21-25. Ren Lei,Cui Ruihua,Wang zongpei,et al.Saturation Effect of PMSM Windings Inductance[J].Transactions of China Electrotechnical Society,2000,15(1)
|
[18] | 程树康,于艳君,柴凤,等. 内置式永磁同步电机电感参数的研究. 中国电机工程学报, 2009,29(18):94-99. Cheng Shukang,Yu Yanjun,Chai Feng,et al.Analysis of the inductances of interior permanent magnet synchronous motor[J].Proceedings of the CSEE,2009,29(18)
|
[19] | 胡家兵,贺益康,年珩,等. 基于磁饱和凸极效应的面贴式PMSM零速下无传感器技术[J]. 中国电机工程学报, 2006,26(10):152-157. Hu Jiabing,He Yikang,Nian Heng,et al.The zero-speed sensorless control for surface mounted PMSM based on the magnetic-saturation saliency-effect[J].Proceedings of the CSEE,2006,26(10)
|
[20] | Lee W J,Sul S K. A New Starting Method of BLDC Motors Without Position Sensor[J]. IEEE Transactions on Industry Applications, 2006,42(6):1532-1538.
|