[1] | 李刚,胥建群,曹祖庆. 高中压缸平衡盘漏汽率计算及误差分析[J]. 热力发电, 2010,39(12):35-39. Li Gang,Xu Jianqun,Cao Zuqing.Calculation of steam leakage rate from balancing disc in HP and MP cylinders and its error analysis[J].Thermal Power Generation,2010,39(12)
|
[2] | 李刚,胥建群,曹祖庆. 中间分隔轴封漏汽及中压缸效率计算方法[J]. 中国电机工程学报, 2010,30(26):23-28. Li Gang,Xu Jianqun,Cao Zuqing.Research on calculation of N2 leakage and intermediate pressure turbine efficiency[J].Proceedings of the CSEE,2010,30(26)
|
[3] | 李勇,曹丽华,杨善让. 凝汽式汽轮机相对内效率在线监测的一种近似计算方法[J]. 中国电机工程学报, 2002,22(2):64-67. Li Yong,Cao Lihua,Yang Shanrang.An approximate method ofonline monitoring relative internal efficiency for condensing steamturbine[J].Proceedings of the CSEE,2002,22(2)
|
[4] | 李金波,何立东. 蜂窝密封流场旋涡能量耗散的数值研究[J]. 中国电机工程学报, 2007,27(32):67-71. Li Jinbo,He Lidong.Energy dissipation of vortexs in honeycomb seals using numerical simulation[J].Proceedings of the CSEE,2007,27(32)
|
[5] | 李军,邓清华,丰镇平. 蜂窝汽封和迷宫式汽封流动性能比较的数值研究[J]. 中国电机工程学报, 2005,25(16):108-111. Li Jun,Deng Qinghua,Feng Zhenping.Comparison of the flow characteristics for the honeycomb andlabyrinth seal using numerical simulation[J].Proceedings of the CSEE,2005,25(16)
|
[6] | 夏同棠. 汽轮机轴封中换热计算的探讨[J]. 中国电机工程学报, 1991,11(1):20-26. Xia Tongtang.Approach to calculation of heat exchange in turbinelabyrinth glands[J].Proceedings of the CSEE,1991,11(1)
|
[7] | 张春发,李新旺,李娟. 汽轮机轴封系统的通用计算模型及其应用[J]. 中国电机工程学报, 2008,28(20):27-31. Zhang Chunfa,Li Xinwang,Li Juan.General model of shaft seal system of steam-turbine and its application[J].Proceedings of the CSEE,2008,28(20)
|
[8] | 钟平,施延洲,王祝成. 大型汽轮机高中压缸中间轴封漏汽量测试研究[J]. 热力发电, 2006(01):44-47,51. Zhong Ping,Shi Yanzhou,Wang Zhucheng.Research on N2 leakage test of large-scale steam turbine[J].Thermal Power Generation,2006(01)
|
[9] | Hopson W. Finding and fixing leakage within combined HP-IP steam turbines:Part I[J]. Power, 2007,115(7):26-33.
|
[10] | Hopson W. Finding and fixing leakage within combined HP-IP steam turbines:Part II[J]. Power, 2007,115(8):13-21.
|
[11] | Booth J A,Kantemann D E. Estimating the leakage from hp to ip turbine section[C]//Proceeding of EPRI Power Plant Performance Monitoring Conference. Washington D.C:EPRI Power Plant Performance Monitoring Workshop, 1984.
|
[12] | Caudill M B,Griebenow R D. Analysis of leakage between HP and IP turbines using PEPSE[C]//Proceeding of PEPSE User?s Group Meeting. Rochester, NY,1991.
|
[13] | Fiadjoe T,Estimating HP-IP midspan packing leakage in combined cycles[J]. Journal of Engineering for Gas Turbines and Power,2008,130(2):4.
|
[14] | Beebe R. Monitoring central gland leakage on combined HP-IP casing steam turbines[C]//Proceedings of the 1st World Congress on Engineering Asset Management (WCEAM),London:Springer,2006.
|
[15] | 郭永杰,郭建林,李名远. 高中压合缸汽轮机汽封漏汽量的现场实测与分析[J]. 动力工程, 1991,11(2):20-24. Guo Yongjie,Guo Jianlin,Li Mingyuan.On site measurement and analysis of mid-gland leakage of integrated HP and IP cylinders power engineering[J].Power Engineering,1991,11(2)
|
[16] | 章娟,包劲松. 变汽温法测300MW机组高中压缸间轴封漏汽量的应用实践[J]. 发电设备, 2004(2):79-81. Zhang Juan,Bao Jinsong.Application of the steam temperature variation method for measuring gland-steam leakage between HP and IP cylinders of 300 MW sets[J].Power Equipment,2004(2)
|
[17] | Kosman W. Thermal analysis of cooled supercritical steam turbine components[J]. Energy, 2010(35):1181-1187.
|
[18] | Lang F D,Canning T. Determing HP-IP turbine seal leakage[C]//Proceedings of the ASME 2010 Power Conference,Chicago,Illinois,2010.
|
[19] | 胥建群,蒋寻寒,曹祖庆. 高中压合缸分隔轴封漏汽计算方法与误差分析[J]. 热力透平, 2009(38):102-105. Xu Jianqun,Jiang Xunhan,Cao Zuqing.The calculation and error analysis for HP-IP midspan packing leakage in steam turbines[J].Thermal Turbine,2009(38)
|
[20] | 朱宝田. 用线性化方法分析汽轮机级效率缸效率等参数对功率热耗率的影响[J]. 热力发电, 1987,3(1):17-26. Zhu Baotian.Analysis of the influence of turbine effect ion on heat with linearization method[J].Thermal Power Generation,1987,3(1)
|