Keck H，Sick M． Thirty years of numerical flow simulation in hydraulic turbomachines[J]． Acta Mechanics， 2008，201(1-4)：211-229．
[2]
钱忠东，郑彪，杨建东，等． 水轮机补气条件下压力脉动的数值分析[J]． 水力发电学报， 2008，27(4)：126-134． Qian Zhongdong，Zheng Biao，Yang Jiandong，et al．Numerical simulation and analysis of pressure pulsation in Francis hydraulic turbine with air admission[J]．Journal of Hydroelectric Engineering，2008，27(4)
[3]
Wang Wenquan，Zhang Lixiang，Guo Yakun． Turbulent flow simulation using LES with dynamical mixed one-equation subgrid models in complex geometries[J]． International Journal for Numerical Methods in Fluids， 2010，63(5)：600-621．
[4]
吴玉林，吴晓晶，刘树红． 水轮机内部涡流与尾水管压力脉动相关性分析[J]． 水力发电学报， 2007，26(5)：123-127． Wu Yulin，Wu Xiaojing，Liu Shuhong．Correlation analysis of the internal vortex flow of hydro turbine with the pressure fluctuation inside draft tube[J]．Journal of Hydroelectric Engineering，2007，26(5)
[5]
Wang Wenquan，Zhang Lixiang，Yan Yan，et al． Large-eddy simulation of turbulent flow considering inflow wakes in a Francis turbine blade passage[J]． Journal of Hydrodynamics， 2007，19(2)：201-209．
[6]
祁明旭，丰镇平． 透平动叶顶部间隙流端壁二次流结构研究． 西安交通大学学报， 2005，39(5)：445-449． Qi Mingxu，Feng Zhenping．Study on tip clearance flow of turbine blade-endwall secondary flow structure[J]．Journal of Xi？an Jiaotong University，2005，39(5)
[7]
贾希诚，王正明，蔡睿贤． 叶轮机械中叶顶间隙形态对气动性能影响的数值研究[J]． 工程热物理学报， 2001，22(4)：431-434． Jia Xicheng，Wang Zhengming，Cai Ruixian．Numerical investigation of the effects of tip gap shapes on aerodynamic performance in turbomachinery[J]．Journal of Engineering Thermophysics，2001，17(4)
[8]
张靖煊，林峰，陈静宜，等． 旋转进口畸变条件下轴流压气机叶顶间隙流非定常特征及其与旋转失速的关联性研究[J]． 工程热物理学报， 2008，29(3)：390-394． Zhang Jingxuan，Lin Feng，Chen Jingyi，et al．The unsteady features and role of tip clearance flow in distortion induced instability in an axial compressor[J]．Journal of Engineering Thermophysics，2008，29(3)
[9]
Borello D，Hanjalic K，Rispoli F． Computation of tip-leakage flow in a linear compressor cascade with a second-moment turbulence closure[J]． International Journal of Heat and Fluid Flow， 2007(28)：587-601．
[10]
吴钢，张克危，戴勇峰． 转轮间隙及密封结构对混流式水电机组安全运行的影响[J]． 大电机技术， 2005(1)：44-52． Wu Gang，Zhang Kewei，Dai Yongfeng．Influences of the runner gap and seal construction on the safety in operation of Francis water power sets[J]．Large Motor Technology，2005(1)
[11]
戴勇峰，壬海，张克危，等． 混流可逆式转轮密封装置的泄漏量及其对机组运行的影响[J]． 水力发电学报， 2005，24(2)：100-104． Dai Yongfeng，Wang Hai，Zhang Kewei，et al．Analysis of the leakage of the Francis pump-turbine runner？s sealing device and its effect on operation of the set[J]．Journal of Hydroelectric Engineering，2005，24(2)
[12]
梁武科，董彦同，赵道利，等． 混流式水轮机减压管对密封间隙及其周围流场的影响[J]． 水力发电学报， 2008，28(2)：135-140． Liang Wuke，Dong Yantong，Zhao Daoli，et al．The influence of relief pipes of Francis hydraulic turbine on the flow field of the sealing clearance and its envirous[J]．Journal of Hydroelectric Engineering，2008，28(2)
[13]
Nezym V． A statistical model for the effect of casing treatment recesses on compressor rotor performance[J]． Experimental Thermal and Fluid Science， 2007，31(8)：1165-1176．
[14]
Deng Q H，Niu J F，Feng Z P． Study on leakage flow characteristics of radial inflow turbines at rotor tip clearance[J]． Science in China Series E：Technological Sciences， 2008，51(8)：1125-1136．
[15]
Li W，Qiao W Y，Xu K F，et al． Numerical simulation of tip clearance flow passive control in axial turbine[J]． Journal of Thermal Science， 2008，17(2)：147-155．
[16]
Vreman A W． An eddy-viscosity subgrid-scale model for turbulent shear flow：algebraic theory and applications[J]． Physics of Fluids， 2004，16(10)：3670．
[17]
You D，Moin P． A dynamic global-coefficient subgrid- scale eddyviscosity model for large-eddy simulation in complex geometries[J]． Physics of Fluids， 2007(19)：169-182．
