Randall R B． A new method of modeling gear faults [J]． Journal of Mechanical Design， 1982，104：259-267．
[2]
McFadden P D． Detecting fatigue cracks in gears by amplitude and phase demodulation of the meshing vibration[J]． Journal of Vibration Acoustics Stress and Reliability in Design-Transactions of the ASME， 1986，108(2)：165-170．
[3]
Feng Z P，Zuo M J，Hao R J，et al． Gear damage assessment based on cyclic spectral analysis[J]． IEEE Transactions on Reliability， 2011，60(1)：21-32．
[4]
Abramowitz M，Stegun I A． Handbook of Mathematical Functions With Formulas，Graphs，and Mathematical Tables[M]． New York：Dover， 1972：358-373．
[5]
Inalpolat M，Kahraman A． A theoretical and experimental investigation of modulation sidebands of planetary gear sets[J]． Journal of Sound and Vibration， 2009，323(3-5)：677-696．
[6]
Inalpolat M，Kahraman A． A dynamic model to predict modulation sidebands of a planetary gear set having manufacturing errors[J]． Journal of Sound and Vibration， 2010，329(4)：371-393．
[7]
冯志鹏，褚福磊． 行星齿轮箱齿轮分布式故障振动频谱特征[J]． 中国电机工程学报， 2013，33(2)：118-125． Feng Zhipeng，Chu Fulei．Vibration spectral characteristics of distributed gear fault of planetary gearboxes[J]．Proceedings of the CSEE，2013，33(2)
[8]
Samuel P D，Pines D J． A review of vibration-based techniques for helicopter transmission diagnostics [J]． Journal of Sound and Vibration， 2005，282(1-2)：475-508．
[9]
Chaari F，Fakhfakh T，Haddar M． Dynamic analysis of a planetary gear failure caused by tooth pitting and cracking[J]． Journal of Failure Analysis and Prevention， 2006，6(2)：73-78．
[10]
Chaari F，Fakhfakh T，Hbaieb R，et al． Influence of manufacturing errors on the dynamic behavior of planetary gears[J]． The International Journal of Advanced Manufacturing Technology， 2006，27(7-8)：738-746．
[11]
Feng Z P，Zuo M J，Chu F L． Application of regularization dimension to gear damage assessment[J]． Mechanical Systems and Signal Processing， 2010，24：1081-1098．
[12]
郭鹏，Infield D，杨锡运． 风电机组齿轮箱温度趋势状态监测及分析方法[J]． 中国电机工程学报， 2011，31(32)：129-136． Guo Peng，Infield D，Yang Xiyun．Wind turbine gearbox condition monitoring using temperature trend analysis [J]．Proceedings of the CSEE，2011，31(32)
[13]
刘占生，崔亚辉，叶建槐，等． 非线性油膜力和啮合力作用下齿轮系统的振动特性研究[J]． 中国电机工程学报， 2009，29(23)：84-91． Liu Zhansheng，Cui Yahui，Ye Jianhuai，et al．Research on vibration characteristics of gear system with nonlinear oil film force and mesh force[J]．Proceedings of the CSEE，2009，29(23)
[14]
Feng Z P，Zuo M J． Vibration signal models for fault diagnosis of planetary gearboxes[J]． Journal of Sound and Vibration， 2012，331(22)：4919-4939．
[15]
张进，冯志鹏，褚福磊． 基于时间-小波能量谱的齿轮故障诊断[J]． 振动与冲击， 2011，30(1)：157-161． Zhang Jin，Feng Zhipeng，Chu Fulei．Fault diagnosis of gears based on time-wavelet spectrum[J]．Journal of Vibration and Shock，2011，30(1)
