Luo Y L,Cui X S,Zhao H S,et al．A multifunction energy saving device with a novel power-off control strategy for beam pumping motors[J]．IEEE Transactions on Industry Applications,2011,47(4)：1605-1611．
[2]
Sam G．Gibbs,Duane L．Inferring power consumption and electrical performance from motor speed in oil-well pumping units[J]．IEEE Transactions on Industry Applications,1997,33(1)：187-193．
[3]
崔学深,罗应立,杨玉磊,等．周期性变工况条件下异步电机节能机理和节能途径[J]．中国电机工程学报,2008,48(18)：90-97．Cui Xueshen,Luo Yingli,Yang Yulei,et al．Energy saving theory and approach for asynchronous motor under the periodically variable running condition[J]．Proceedings of the CSEE,2008,48(18)：90-97(in Chinese)．
[4]
Gao Jingde,Zhang Linzheng,Wang Xiangheng．AC machine system：mathematical model and parameters,analysis,and system performance[M]．Berlin and Beijing： Springer-Verlag Berlin and Heidelberg and Tsinghua University Press,2009：258-266．
[5]
曹君慈,李伟力,齐歌,等．复合笼条转子感应电动机不同转子材料特性对起动性能的影响[J]．中国电机工程学报,2005,25(14)：103-107．Cao Junci,Li Weili,Qi Ge,et al．The influence of different material characteristic in compound cage rotor of induction motor on starting performance[J]．Proceedings of the CSEE,2005,25(14)：103-107(in Chinese)．
[6]
Zhang Dianhai,Chang Soon Park,Chang Seop Koh．A new optimal design method of rotor slot of three-phase squirrel cage induction motor for NEMA class D Speed-torque characteristic using multi-objective optimization algorithm[J]．IEEE Transactions on Magnetics,2012,48(2)：879-882．
[7]
Gyeorye Lee,Seungjae Min,Jung-Pyo Hong．Optimal shape design of rotor slot in squirrel-cage induction motor considering torque characteristics[J]．IEEE Transactions on Magnetics,2013,49(5)：2197-2220．
[8]
Yamazaki K,Noriaki F．Iron-loss modeling for rotating machines：comparison between bertotti's three-term expression and 3-D eddy-current analysis．Magnetics[J]．IEEE Transactions on Magnetics,2010,46(8)：3121-3124．
[9]
Zbigniew G,Boglietti A,Cavagnino A．Estimation of iron losses in induction motors：calculation method,results,and analysis[J]．IEEE Transactions on Industrial Electronics,2010,57(1)：161-171．
[10]
吴新振,王祥珩,罗成．异步电机转子感应非正弦电流时的导条损耗[J]．中国电机工程学报,2005,25(17)：131-135．Wu Xinzhen,Wang Xiangheng,Luo Cheng．Loss calculation for induction machine rotor bar with non-sinusoidal current[J]．Proceedings of the CSEE,2005,25(17)：131-135(in Chinese)．
[11]
赵海森,罗应立,刘晓芳,等．异步电机空载铁耗分布的时步有限元分析[J]．中国电机工程学报,2010,30(30)：99-106．Zhao Haisen,Luo Yingli,Liu Xiaofang,et al．Analysis on no-load iron losses distribution of asynchronous motors with time-stepping finite element method[J]．Proceedings of the CSEE,2010,30(30)：99-106(in Chinese)．
[12]
Komeza K,Dems M．Finite-element and analytical calculations of no-load core losses in energy-saving induction motors[J]．IEEE Transactions on Industrial Electronics,2013,59(7)：2934-2946．
[13]
Zhao H S,Liu X F,Luo Y L,et al．Time-stepping finite element analysis on the influence of skewed rotors and different skew angles on the losses of squirrel cage asynchronous motors[J]．Science China Technological Sciences,2011,54(9)：2511-2519．
[14]
赵海森,刘晓芳,罗应立,等．电压偏差条件下笼型感应电机的损耗特性[J]．电机与控制学报．2010,14(5)：13-19．Zhao Haisen,Liu Xiaofang,Luo Yingli,et al．Losses characteristics of cage induction motors under voltage deviation conditions[J]．Electric Machines and Control,2010,14(5)：13-19(in Chinese)．
[15]
Centner M., Schafer U.．Optimized design of high-speed induction motors in respect of the electrical steel grade[J]．IEEE Transactions on Industry Applications,2010,57(1)：288-295．
[16]
Zhao Haisen,Zhang Jian,Wang Xiangyu,et al．A design method for cage induction motors with non-skewed rotor bars[J]．IEEE Transactions on Magnetics,2014,50(2)： 7019004．
[17]
董世民．抽油机井动态参数计算机仿真与系统优化[M]．北京：石油工业出版社,2003：53-72．Dong Shimin．Computer simulation of dynamic parameters of rod pumping simulation and system optimization[M]．Beijing：Petroleum Industry Press,2003：53-72(in Chinese)．
[18]
胡敏强,黄学良．电机运行性能数值计算方法及其应用[M]．南京：东南大学出版社,2003：2-3：173-177．Hu Minqiang,Huang Xueliang．Numerical computation method of electric machine performance and its application[M]．Nanjing：Northeast University Publisher,2003：2-3：173-177(in Chinese)．
