鄂世举,汤乐超,程光明．非对称波驱动的非接触式超声电机[J]．中国电机工程学报,2011,31(9)：94-99．E Shiju,Tang Lechao,Cheng Guangming．A new type of non-contact ultrasonic motor driven by asymmetric wave[J]．Proceedings of the CSEE,2011,31(9)：94-99(in Chinese)．
[2]
赵淳生,超声电机技术与应用[M]．北京：科学出版社,2007：1-5,238．Zhao Chunsheng．Ultratonic motors technologies and application[M]．Beijing：Science Press,2007：1-5,238(in Chinese)．
[3]
Sashida T,Kenjo T．An introduction to ultrasonic motors[M]．Oxford：Oxford Science Publications,1993：1-5．
[4]
Bolborici V,Dawson F P,Pugh M C．A finite volume method and experimental study of a stator of a piezoelectric traveling wave rotary ultrasonic motor[J]．Ultrasonics,2014,54(3)：809-820．
[5]
Smith Gabriel L,Rudy Ryan Q,Polcawich Ronald G,et al．Integrated thin-film piezoelectric traveling wave ultrasonic motors[J]．Sensors and Actuators A,2012(188)：305-311．
[6]
Zhang X F,Zhang G B,Nakamura Kentaro,et al．A robot finger joint driven by hybrid multi-DOF piezoelectric ultrasonic motor[J]．Sensors and Actuators A,2011,169(1)：206-210．
[7]
胡锡幸,郭吉丰．3个行波定子的2自由度球形超声波电机[J]．中国电机工程学报,2010,30(9)：62-67．Hu Xixing,Guo Jifeng．Two degree of freedom spherical ultrasonic motor with three traveling-wave stators[J]．Proceedings of the CSEE,2010,30(9)：62-67(in Chinese)．
[8]
Dmitry A．Stepanenko,Vladimir T．Minchenya．Development and study of novel non-contact ultrasonic motor based on principle of structural asymmetry[J]．Ultrasonics,2012,52(7)：866-872．
[9]
白洋,王剑,郭吉丰,等,新型旋转-直线超声波电机的机理与特性[J]．浙江大学学报：工学版,2013,47(10)：1852-1856．Bai Yang,Wang Jian,Guo Jifeng,et al．Mechanism and characteristic of novel rotary-linear ultrasonic motor[J]．Journal of Zhejiang University：Engineering Science,2013,47(10)：1852-1856(in Chinese)．
[10]
芦丹,郑伟,赵淳生．真空环境下超声电机的速度测试与控制[J]．光学精密工程,2008,16(7)：1218-1222．Lu Dan,Zheng Wei,Zhao Chunsheng．Speed test and control for ultrasonic motor working in vacuum[J]．Optics and Precision Engineering,2008,16(7)：1218-1222(in Chinese)．
[11]
周盛强,赵淳生．超声电机定子振动分析的模态选择[J]．光学精密工程,2009,V17(N12)：3009-3015．Zhou Shengqiang,Zhao Chunsheng．Modal truncation to vibration analysis of stator in ultrasonic motor[J]．Optics and Precision Engineering,2009,V17(N12)：3009-3015(in Chinese)．
[12]
Yang Bin,Liu Jingquan,Chen Di,et al．Theoretical and experimental research on a disk-type non-contact ultrasonic motor[J]．Ultrasonics,2006,44(3)：238-243．
[13]
Lu Xiaolong,Hu Junhui,Yang Lin,et al．A novel dual stator-ring rotary ultrasonic motor[J]．Sensors and Actuators A,2013(189)：504-511．
[14]
Liu Yingxiang,Chen Weishan,Feng Peilian,et al．A rotary piezoelectric motor using bending vibrators[J]．Sensors and Actuators A,2013(196)：48-54．
[15]
Daisuke Yamaguchi,Takefumi Kanda,Koichi Suzumori．An ultrasonic motor for cryogenic temperature using bolt-clamped Langevin-type transducer[J]．Sensors and Actuators A,2012(184)：134-140．
[16]
Liu Yingxiang,Chen Weishan,Liu Junkao,et al．A cylindrical standing wave ultrasonic motor using bending vibration transducer[J]．Ultrasonics,2011,51(5)：527-531．
[17]
Lu Xiaolong,Hu Junhui,Zhang Qi,et al．An ultrasonic driving principle using friction reduction[J]．Sensors and Actuators A,2013(199)：187-193．
[18]
Yingxiang Liu,Weishan Chen,Junkao Liu,et al．A cylindrical traveling wave ultrasonic motor using longitudinal and bending composite transducer[J]．Sensors and Actuators A,2010(161)：158-163．
[19]
Liu Yingxiang,Chen Weishan,Feng Peilian,et al．A square-type rotary ultrasonic motor with four driving feet[J]．Sensors and Actuators A,2012(180)：113-119．
[20]
彭太江,杨志刚,田丰君,等,轴系超声波悬浮支撑技术研究[J]．光学精密工程,2008,16(10)：1895-1900．Peng Taijiang,Yang Zhigang,Tian Fengjun,et al．Investigation on ultrasonic levitative support to high speed axis in fly wheel[J]．Optics and Precision Engineering,2008,16(10)：1895-1900(in Chinese)．
