国家统计局能源统计司．中国能源统计年鉴2012[M]．北京：中国统计出版社,2012：98． Department of Energy Statistics,National Bureau of Statistics．China energy statistical yearbook 2012[M]．Beijing：China Statistics Press,2012：98 (in Chinese)．
[2]
Editors．bp statistical review of word energy 2012[R/OL]．http://bp.com/statisticalreview．
[3]
李培德,刘京辉,冯勇祥,等．石墨改性聚丙烯换热器的发展[J]．化工生产与技术,2001,8(2)：17-19． Li Peide,Liu Jinghui,Feng Yongxiang,et al．The development of graphite modified polypropylene heat exchanger[J]．Chemical Production and Technology,2001,8(2)：17-19(in Chinese)．
[4]
陆万鹏,孙奉仲,史月涛．电站锅炉排烟余热能级提升系统火用分析[J]．中国电机工程学报,2012,32(23)：9-13． Lu Wanpeng,Sun Fengzhong,Shi Yuetao．Exergy analysis of advanced boiler flue gas heat recovery system in power plant[J]．Proceedings of the CSEE,2012,32(23)：9-13(in Chinese)．
[5]
马千里．烟气余热换热器的热力学和经济性分析[J]．能源与节能,2011(7)：39-40,49． Ma Qianli．Thermodynamic and economic analysis of flue gas wasteheat exchanger[J]．Energy and Energy Conservation,2011(7)：39-40,49(in Chinese)．
[6]
钱颂文主编．换热器设计手册[M]．北京：化学工业出版社,2002：307-311． Qian Songwen．Heat exchanger design handbook[M]．Beijing：Chemical Industry Press,2002：307-311(in Chinese)．
[7]
杨世铭,陶文铨．传热学[M]．北京：高等教育出版社,2006：243-252． Yang Shiming,Tao Wenquan．Heat transfer[M]．Beijing：Higher Education Press,2006：243-252(in Chinese)．
徐钢,许诚,杨勇平,等．电站锅炉余热深度利用及尾部受热面综合优化[J]．中国电机工程学报,2013,33(14)：1-8． Xu Gang,Xu Cheng,Yang Yongping,et al．Deep utilization of exhaust heat and comprehensive optimization of tail heating surfaces for utility boilers[J]．Proceedings of the CSEE,2013,33(14)：1-8(in Chinese)．
[10]
Wang C,He B,Sun S,et al．Application of a low pressure economizer for waste heat recovery from the exhaust flue gas in a 600MW power plant[J]．Energy,2012,48(1)：196-202．
[11]
谭青,王东平,王伟敏,等．锅炉烟气余热回收装置[J]．上海节能,2012,31(5)：30-33,36． Tan Qing,Wang Dong ping,Wang Wei min,et al．Boiler Flue Gas Waste Heat Recovery Unit[J]．Shanghai Energy Conservation,2012,31(5)：30-33,36(in Chinese)．
[12]
金保升,唐志永,孙克勤,等．燃煤电站烟囱中硫酸冷凝沉积速度的数值预测[J]．中国电机工程学报,2006,26(9)：40-44． Jin Baosheng,Tang Zhiyong,Sun Keqin,et al．Numerical prediction of the deposit rate of condensed sulfuric acid from the flue gas of power plant chimney[J]．Proceedings of the CSEE,2006,26(9)：40-44(in Chinese)．
[13]
Stehlík P．Conventional versus specific types of heat exchangers in the case of polluted flue gas as the process fluid-A review[J]．Applied Thermal Engineering,2011,31(1)：1-13．
[14]
Reay D A．Use of polymers in heat exchangers[J]．Heat Recovery Systems & CHP,1989,9(3)：209-216．
[15]
Zaheed L,Jachuck R J J．Review of polymer compact heat exchangers,with special emphasis on a polymer film unit[J]．Applied Thermal Engineering,2004,24(16)：2323-2358．
[16]
Minor W R．Heat exchangers with tubes of `Teflon'[J]．Petro/Chem Engineer,1966,38(2)：34-39．
[17]
Rosato D V．Plastics processing data handbook[M]．New York：Chapman & Hall,1997．
[18]
Miller J．Thermally conductive thermo-plastics[J]．Advanced Materials and Processes,2003,161(10)：34-35．
[19]
Chen Lin,Li Zhen,Guo ZengYuan．Experimental investigation of plastic finned-tube heat exchangers,with emphasis on material thermal conductivity[J]．Experimental Thermal and Fluid Science,2009,33(5)：922-928．
[20]
胡亚才,张雪东,王建平,等．塑料换热技术在溴化锂吸收式制冷机上的应用展望[J]．制冷学报,2005,24(1)：44-48． Hu Yacai,Zhang Xuedong,Wang Jianping,et al．Plastic heat transfer technology application prospect on lithium bromide：water absorption chillers[J]．Journal of Refrigeration,2005,24(1)：44-48(in Chinese)．
