全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

硅橡胶中局部放电发展与电树枝生长的关系研究

DOI: 10.13334/j.0258-8013.pcsee.2014.15.021, PP. 2493-2501

Keywords: 硅橡胶,局部放电,相位特征谱图,电树枝,电树枝面积,绝缘状态评估

Full-Text   Cite this paper   Add to My Lib

Abstract:

研究硅橡胶中电树枝化微观物理过程与局部放电宏观表征之间的关系,能够为基于局部放电严重程度在线评估电缆中间接头的绝缘状态提供理论依据。制备了带有缺陷的硅橡胶切片试品,在逐级升压过程中实时测量了硅橡胶绝缘劣化起始直至击穿全过程中的电树枝照片和局部放电信号,生成了电树枝面积和单位时间内局部放电能量随时间的变化曲线,阐述了两条曲线之间的对应关系。基于电树枝面积曲线的变化规律,将电树枝生长全过程划分为引发及生长、滞长、快速生长共计3个阶段,讨论了各阶段电树枝的生长模式;基于局部放电能量的发展变化规律,将局部放电发展全过程划分为5个阶段,得到了各阶段局部放电相位特征谱图,提取了灰度图空穴面积和局部放电相位宽度作为表征局部放电严重程度的特征量。研究结果表明,电树枝面积曲线和局部放电能量曲线的发展趋势具有高度的一致性,电树枝生长的3个阶段分别对应于局部放电发展的1-2阶段、3阶段以及4-5阶段,从而建立了硅橡胶劣化微观物理过程和局部放电宏观表征之间的关系,为电缆中间接头绝缘状态的在线评估奠定了基础。

References

[1]  速水敏幸.电力设备的绝缘诊断[M].刘晓萱, 译.北京:科学出版社, 2003:2-15. Hayami T . Insulation diagnosis for electric power equipment[M].Liu Xiaoxuan, translated.Beijing:Science Press, 2003:2-15(in Chinese).
[2]  Champion J, Dodd S, Stevens G.Analysis and modeling of electrical tree growth in synthetic resins over a wide range of stressing voltage[J].Journal of Physics D:Applied Physics, 2007, 33(12):14-18.
[3]  Dissado L, Fothergill J.Electrical degradation and breakdown in polymers[M].London, UK:Peter Peregrinus, 1992:117-140.
[4]  Fothergill J, Dissado L, Sweeney P.A discharge- eavalanche theory for the propagation of electrical trees[J].IEEE Transactions on Dielectrics and Electrical Insulation, 1994, 1(3):474-486.
[5]  郑晓泉, G. Chen, A. Davies.交联聚乙烯电缆绝缘中的导电和非导电型电树枝[J].中国电机工程学报, 2004, 24(3):140-144. Zheng Xiaoquan, Chen G, Davies A.Conducting and non-conducting electrical trees in XLPE[J].Proceedings of the CSEE, 2004, 24(3):140-144(in Chinese).
[6]  郑晓泉, Chen G, Davies A.交联聚乙烯电缆绝缘中的双结构电树枝特性及其形态发展规律[J].中国电机工程学报, 2006, 26(3):79-85. Zheng Xiaoquan, Chen G, Davies A.Characteristic and developing law of a double structure electrical tree in XLPE cable insulation[J].Proceedings of the CSEE, 2006, 26(3):79-85(in Chinese).
[7]  谢安生, 郑晓泉, 李盛涛, 等.XLPE电缆绝缘中的电树枝结构及其生长特性[J].高电压技术, 2007, 33(6):44-48. Xie Ansheng, Zheng Xiaoquan, Li Shengtao, et al.Structures and propagation characteristics of electrical trees in XLPE cable insulation[J].High Voltage Engineering, 2007, 33(6):44-48(in Chinese).
[8]  Xie A S, Zheng X Q, Li S T, et al.Investigations of electrical tress in the inner layer of XLPE cable insulation using computer-aided image recording monitoring[J].IEEE Transactions on Dielectrics and Electrical Insulation, 2010, 17(3):685-693.
[9]  郑晓泉, 谢安生, 李盛涛.发展在XLPE 电缆绝缘内外侧的电树枝[J].物理学报, 2007, 56(9):5494-5501. Zheng Xiaoquan, Xie Ansheng, Li Shengtao.Development in the inner and outer XLPE cable insulation electrical trees[J].Acta Physica Sinica, 2007, 56(9):5494-5501(in Chinese).
[10]  谢安生, 李盛涛, 郑晓泉.高频电压下交联聚乙烯电缆绝缘中电树枝生长的动力学模型[J].物理学报, 2008, 57(6):168-173. Xie Ansheng, Li Shengtao, Zheng Xiaoquan.High voltage XLPE cable insulation electrical tree growth kinetics model[J].Acta Physica Sinica, 2008, 57(6):168-173(in Chinese).
[11]  王以田, 郑晓泉, G. Chen, 等.聚合物聚集态和残存应力对交联聚乙烯中电树枝的影响[J].电工技术学报, 2004, 19(7):44-48. Wang Yitian, Zheng Xiaoquan, Chen G, et al.Influence of polymer congregating state and survival mechanical stress to electrical treeing in XLPE[J].Journal of Electrician Technique, 2004, 19(7):44-48(in Chinese).
[12]  郑晓泉, Chen G.机械应力与电压频率对XLPE电缆电树的影响[J].高电压技术, 2003, 29(4):6-8. Zheng Xiaoquan, Chen G.The influence of residual mechanical stress and voltage frequency on electrical tree in XLPE[J].High Voltage Engineering, 2003, 29(4):44-48(in Chinese).
[13]  杨文虎, 易冉, 徐阳, 等.环氧树脂中电树枝生长特性及其动力学模型的实验验证[J].绝缘材料, 2012, 45(1):52-56. Yang Wenhu, Yi Ran, Xu Yang, et al.Growth characteristics of electrical tree in epoxy resin and experimental verification of its dynamic model[J].Insulation Matericals, 2012, 45(1):52-56(in Chinese).
[14]  殷庆铎, 高文胜, 叶宽.绝缘材料电树枝发展过程中不同效应的影响[J].高电压技术, 2009, 35(4), 766-771. Yin Qingduo, Gao Wensheng, Ye Kuan.Influence of different effects on growth of electrical trees in insulation polymer[J].High Voltage Engineering, 2009, 35(4), 766-771(in Chinese).
[15]  周远翔, 聂琼, 姜绿先, 等.针尖曲率半径对硅橡胶电树枝老化特性的影响[J].中国电机工程学报, 2008, 28(34):27-32. Zhou Yuanxiang, Nie Qiong, Jiang Lüxian, et al.Influence of curvature radius of needle tip on characteristics of electrical treeing in silicone rubber[J].Proceedings of the CSEE, 2008, 28(34):27-32(in Chinese).
[16]  夏岩松, 彭岱, 陈国东, 等.硅橡胶绝缘介质中电树的特性的研究[J].高压电器, 2013, 49(8):107-111. Xia Yansong, Peng Dai, Chen Guodong, et al.Growth characteristics of electrical tree in silicone rubber[J].High Voltage Apparatus, 2013, 49(8):107-111(in Chinese).
[17]  陈铮铮, 程子霞, 周远翔, 等.气泡及气隙裂纹缺陷对硅橡胶电树枝起始特性的影响[J].高电压技术, 2009, 35(10):2416-2420. Chen Zhengzheng, Cheng Zixia, Zhou Yuanxiang, et al.Influence of gas void and gas crack defects on electrical tree initiation in silicone rubber[J].High Voltage Engineering, 2009, 35(10):2416-2420(in Chinese).
[18]  廖瑞金, 周天春, 刘玲, 等.交联聚乙烯电力电缆的电树枝化试验及其局部放电特征[J].中国电机工程学报, 2011, 31(28):136-143. Liao Ruijin, Zhou Tianchun, Liu Ling, et al.Experimental research on electrical treeing and partial discharge characteristics of cross-linked polyethylene power cables[J].Proceedings of the CSEE, 2011, 31(28):136-143(in Chinese).
[19]  陈向荣, 徐阳, 王猛等, 等.高温下110kV交联聚乙烯电缆电树枝生长及局部放电特性[J].高电压技术, 2012, 38(3):645-654. Chen Xiangrong, Xu Yang, Wang Meng, et al.Propagation and partial discharge characteristics of electrical trees in 110kV XLPE cable insulation at high temperature[J].High Voltage Engineering, 2012, 38(3):645-654(in Chinese).
[20]  陈仕军, 叶笛, 刘华麟, 等.不同生长阶段下电树枝放电的时频特征分析[J].高压电器, 2013, 49(3):49-58. Chen Shijun, Ye Di, Liu Hualin, et al.Analysis on time- frequency characteristics of electrical tree discharge in different growth stages[J].High Voltage Apparatus, 2013, 49(3):49-58(in Chinese).
[21]  齐波, 李成榕, 郝震, 等.GIS绝缘子表面固定金属颗粒沿面局部放电发展的现象及特征[J].中国电机工程学报, 2011, 31(1):101-109. Qi Bo, Li Chengrong, Hao Zhen, et al.Evolution phenomena and features of surface partial discharge initiated by immobilized metal particles on GIS insulators[J].Proceedings of the CSEE, 2011, 31(1):101-109(in Chinese).
[22]  常文治, 李成榕, 苏錡, 等.电缆接头尖刺缺陷局部放电发展过程的研究[J].中国电机工程学报, 2013, 33(7):192-201. Chang Wenzhi, Li Chengrong, Su Qi, et al.Study on development of partial discharges at the defect caused by a needle damage to a cable joint[J].Proceedings of the CSEE, 2013, 33(7):192-201(in Chinese).

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133